The current PSI works perfectly but I don't like the pale green prompt.
Tried editing .bashrd , /ext/fprofile and /ext/bash.bashrc but no
changes to the PSI definition had any effect
Searched for PSI and found
/usr/src/linux-headers-6.1.0-16-amd64/include/config/PSI
The following sources.list which I copied from
wiki.debian.org/SourcesList works perfectly for me
deb http://deb.debian.org/debian/ bookworm main non-free-firmware
contrib non-free
deb-src http://deb.debian.org/debian/ bookworm main non-free-firmware
contrib non-free
deb
-firmware contrib non-free
Tom George
Thomas George wrote:
My system is Bookworm installed from the first DVD which was
downloaded with the checksums and successfully checked.
I commented out the dvd and added to sources.list lines for bookworm,
bookworm-updates and bookworm-security.
Ran apt
On 1/17/24 22:54, Todd Zullinger wrote:
Greg Wooledge wrote:
On Wed, Jan 17, 2024 at 08:40:58PM -0500, Thomas George wrote:
deb http://ftp.security-debian.org/debian-security/ bookworm-security main
non-free non-free-firmware
Stop guessing, and *read* what you were told to use.
https
On 1/17/24 20:52, Greg Wooledge wrote:
On Wed, Jan 17, 2024 at 08:40:58PM -0500, Thomas George wrote:
deb http://ftp.security-debian.org/debian-security/ bookworm-security main
non-free non-free-firmware
Stop guessing, and *read* what you were told to use.
https://lists.debian.org/debian
On 1/17/24 20:40, Thomas George wrote:
On 1/17/24 19:05, Greg Wooledge wrote:
On Wed, Jan 17, 2024 at 11:31:52AM -0500, Thomas George wrote:
# deb cdrom:[Debian GNU/Linux 12.2.0 _Bookworm_ - Official amd64 DVD
Binary-1 with firmware 20231007-10:29]/ bookworm main non-free-firmware
This one
On 1/17/24 19:05, Greg Wooledge wrote:
On Wed, Jan 17, 2024 at 11:31:52AM -0500, Thomas George wrote:
# deb cdrom:[Debian GNU/Linux 12.2.0 _Bookworm_ - Official amd64 DVD
Binary-1 with firmware 20231007-10:29]/ bookworm main non-free-firmware
This one, before you commented it out, only
On 1/17/24 16:13, Tom Furie wrote:
Thomas George writes:
deb http://ftp.debian.org/debian/ bookworm-security main non-free
non-free-firmware
Err:5 http://ftp.debian.org/debian bookworm-security Release
404 Not Found [IP: 151.101.
I entered you suggested line as
http
Hit:2 http://ftp.debian.org/debian bookworm-updates InRelease
Ign:3 http://ftp.debian.org/debian bookworm-security InRelease
Hit:4 https://linux.brostrend.com stable InRelease
Err:5 http://ftp.debian.org/debian bookworm-security Release
404 Not Found [IP: 151.101.
On 1/16/24 11:30, Thomas George
My system is Bookworm installed from the first DVD which was downloaded
with the checksums and successfully checked.
I commented out the dvd and added to sources.list lines for bookworm,
bookworm-updates and bookworm-security.
Ran apt-get update
The result was bookworm InRelease,
On 1/15/24 11:36, Carl Fink wrote:
On 1/15/24 02:58, David Christensen wrote:
On 1/14/24 16:03, Maureen L Thomas wrote:
> I am using a Lenovo computer with 8G of memory and 1 TB hard drive,
AMD
> Ryzen 3 2200g w/radion vega graphices x4, Graphics Gallium 0.4
llvmpipe,
> it is running 64
nmap finds printer ,printer ip lan address. with lan address printer's
state can be read and test page printed
Cups can install printer with a long ipp address, not wifi. Only the
lpinfo command works, the others are deprectiated, not working so it is
not possible to set an lp destination.
OK no more new posts. Maybe someday the problem will solve itself
On 12/27/23 15:59, Valerio Vanni wrote:
Il 27/12/2023 21:47, Thomas George ha scritto:
gnome setup sound output device: speakers - builtin audio
pulseaudio output device port: speakers (plugged in)
It seems you are opening
gnome setup sound output device: speakers - builtin audio
pulseaudio output device port: speakers (plugged in)
Both of the above show an audio signal when the command
mpv Smoke\ Gets\ In\ Your\ Eyes.mp3
is entered but playback ends after 10 seconds.
The mpv text output ends with AO:
Correction: Output was to headphone. There is a signal for plugged in
speaker. Still no sound from speaker.
On 12/27/23 09:56, Thomas George wrote:
No sound.
alsamixer shows card HDA Intel PCH but no driver list.
pulseaudio volume control output shows no signal.
What am I missing?
No sound.
alsamixer shows card HDA Intel PCH but no driver list.
pulseaudio volume control output shows no signal.
What am I missing?
Pulseaudio Volume control shows a strong signal audio output but nothing
reaches the speakers.
This must be a well known problem but I can't find the answer.
Please help
Tom George
oogle chrome successfully installed.
Tom
On 11/12/23 09:38, Andy Smith wrote:
Hello,
On Sun, Nov 12, 2023 at 09:35:33AM -0500, Thomas George wrote:
I don't like to clutter up my download file. Since I normally use dpkg -i
debfile.deb this would add a directory in the download file.
Whe
I don't like to clutter up my download file. Since I normally use dpkg
-i debfile.deb this would add a directory in the download file.
Tom George
On 11/11/23 23:31, Timothy Butterworth wrote:
On November 11, 2023, at 11:16 PM, David wrote:
>On Sat, 11 Nov 2023 at 18:42, Thomas Geo
As root I edited bashrc as found in root's home directory
On 11/11/23 23:23, Timothy Butterworth wrote:
On November 11, 2023, at 8:51 PM, Thomas George
wrote:
>I downloaded the google-chrome deb file to /opt/
>used dpkg to install the program.
Use sudoapt install ./filename.deb y
Alternately dpkg -i debfile.deb works.
Tom George
On 11/11/23 19:28, The Wanderer wrote:
On 2023-11-11 at 19:09, Greg Wooledge wrote:
On Sat, Nov 11, 2023 at 10:17:09PM +, David wrote:
Looking for an authoritative source of information to show you,
I found only this:
Wooledge wrote:
On Sat, Nov 11, 2023 at 01:03:45PM -0500, Thomas George wrote:
In a newly installed bookworm I edited PATH to
/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
What, exactly, did you edit?
in order to
install google-chrome.
Now that makes no sense... unless you ran
In a newly installed bookworm I edited PATH to
/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin in order to
install google-chrome. This worked but the installed PATH had two
other entries, something about games?
I failed to save and did not take note of all the installed PATH
good point but no success.
used top to find blender and kill. no improvement
On 11/6/23 10:53, Marco M. wrote:
Am 06.11.2023 um 10:26:53 Uhr schrieb Thomas George:
alsactl says sound cards locked. There is a lock directory in
var/lib/alsa/asound-state
mpv song.ogg fails with message No Host
Just upgraded to Bookworm
no sound.
alsactl says sound cards locked. There is a lock directory in
var/lib/alsa/asound-state
mpv song.ogg fails with message No Host
There may be solutions in the debian-user archives. I am slowly reading
these in search of a solution.
Any help?
Tom George
you, I'll know better next time
On 6/23/23 19:17, DdB wrote:
Am 24.06.2023 um 00:09 schrieb Thomas George:
I tried md5sum SHA512SUMS.txt debian-12.0.0-amd64-DVD-1.iso
The outputs do not match
Seriously?
i would have tried
sha512sum -c ShA512SUMS.txt
in the folder, where the iso can be found.
gl
be concerned with the failed verification and if so what should
I do about it.
Tom
Forwarded Message
Subject:Problem verifying iso file
Date: Sun, 18 Jun 2023 16:45:45 -0400
From: Thomas George
To: Tom
What am i doing wrong?
I downloaded SHA512SUMS.txt
Should have included ♠ ♡ ♢ ♣
The unicodes are 2660, 2661, 2662 and 2663
On 3/27/23 12:04, Thomas George wrote:
I am amazed that the playing card symbols spade, heart, diamond and
club don't appear any of the collections in my Debian Buster programs.
I can insert them in the text I type
2:04:53 -0400
> Thomas George wrote:
>
> > I am amazed that the playing card symbols spade, heart,
diamond and
> > club don't appear any of the collections in my Debian Buster
> > programs. I can insert them in the text I type by entering
>
reader users.
--
Jude
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and amo.
Please use in that order."
Ed Howdershelt 1940.
On Mon, 27 Mar 2023, Charles Curley wrote:
> On Mon, 27 Mar 2023 12:04:53 -0400
> Thom
I am amazed that the playing card symbols spade, heart, diamond and club
don't appear any of the collections in my Debian Buster programs. I can
insert them in the text I type by entering CTRL-SHIFT-Uunicode but if
this text in a Thunderbird email to a friend he receives only the unicode.
I
I am giving up and will proceed with the netinst. Thanks everyone for
the many helpful comments and recommendations.
I stripped the spaces from the fingerprint and equated it RSA key. They
matched. So every thing is correct until the last step
Dragonette:/home/tom/Downloads/debian# gpg2
using RSA DF9B9C49EAA9298432589D76DA87E80D6294BE9B
...gpg: BAD signature from "Debian CD signing key
" [unknown]
On 11/15/22 02:59, Henning Follmann wrote:
On Mon, Nov 14, 2022 at 05:17:25PM -0500, Thomas George wrote:
I am still trying to do a fully verified
I am still trying to do a fully verified installation of debian-11.5.0.
gpg --verify SHA512SUMS.sign SHA512SUMS responded with DF98...BE9B
gpg --recv-keys DF98...BE9B responded key DF98...BE9B: new key but
contains no user ID - skipped.
Another source suggested gpg --key-server
Still strugglng. command suggested returns new key but no user id - skipped
On 11/13/22 15:08, Darac Marjal wrote:
On 13/11/2022 19:14, Thomas George wrote:
I want to do a new verified instillation of a debian iso. I have the
iso and SHA512SUMS.sign.txt and SHHA512SUMS.txt and have tried
Still struggling command 3 below responds invalid option --key-server
On 11/13/22 15:46, Gökşin Akdeniz wrote:
Hello,
13.11.2022 22:14 tarihinde Thomas George yazdı:
I want to do a new verified instillation of a debian iso. I have the
iso and SHA512SUMS.sign.txt and SHHA512SUMS.txt and have
I want to do a new verified instillation of a debian iso. I have the iso
and SHA512SUMS.sign.txt and SHHA512SUMS.txt and have tried
gpg --verify SHA512SUMS.sign.txt SHA512SUMS.txt with the result No
Public Key
I thought to skip this step and tried
gpg --verify SHA515SUMS.sign.txt
I installed cheat was describe as a quick way to check a command's
options instead of referring to its man page.
A great convenience but cheat list responds no cheatsheet found for list
instead listing available cheatsheets
Is there a file of cheatsheets to download?
In pavucontrol configuration I can set digital stereo (HDMI) output to
off but it won't stay off.
Is there some way to configure the program so this is off permanently?
Or alternately to make the analog stereo output from my sound card the
default configuration?
I set the GP107GL High Definition Audio Controller profile to off but
it continually reverts to High Definition HDMI Output which overrides
analog output to my external speakers.
Today I found it impossible to turn this off. The off option is there
put when I try to scroll down to it the
After starting gnuplot the first plot works followed by the message
"XDG-RUNTIME_DIR not set, switching to /tmp/runtime_root. After the plot
command no longer works.
The man page for xdg-user-dirs-update lists possible setting for xdg but
RUNTIME is not included. Even if it could reset
Thanks, this fixed my problem and as Greg recommended I have reset mkdir
ownership and options
On 11/5/21 7:35 PM, Jeremy Ardley wrote:
On 6/11/21 7:17 am, Thomas George wrote:
when installing debian I entered eight digits as the root password.
The instillation completed successfully. Later
when installing debian I entered eight digits as the root password. The
instillation completed successfully. Later I tried to become root but
the eight digits didn't work and many permutations also didn't work.
I have used sudo successfully with many commands including mkdir but
sudo tar
The zoom client downloaded from the zoom web page seems to have been
written for Debian 8
Installing it in bullseye fails, dependency problems
The installation from a usb stick went smoothly. Everything works sudo
commands work so I will rarely need to log on as root.
Nevertheless there are rare cases only root can make changes.
What to do?
Failure to pair and connect android cellphone and Debian pc. The
cellphone scans and finds the pc but cannot maintain the connection.
bt-device -l responds added devices moto g(7) play (04:D3:95:43:1D:43)
hciconfig -a responds hci0: Type: Primary Bus: USB BD Address
F8:AC:65:85:BF:91 and
me strange keys on the
Logitech keyboard that I never have had occasion to use. My need is not
urgent, just curiosity.
On 11/2/20 8:25 AM, Greg Wooledge wrote:
On Sat, Oct 31, 2020 at 03:42:11PM -0400, Thomas George wrote:
I want to assign a unicode character to an unused key on my keyboard. F
I had not tried putting the expression in quotes. When I did it worked.
Of course keycodes may differ for different systems and different
keyboards. With mine xmodmap -pk showed 71 as keycode for F5.
On 10/31/20 4:23 PM, The Wanderer wrote:
On 2020-10-31 at 15:42, Thomas George wrote:
I
I want to assign a unicode character to an unused key on my keyboard.
For example F6 currently is assigned ~, name of my home directory. I
would like to change it to ♠.
I have tried xmodmap -e keycode 71 = U2660 and several other variations
without success
at 50%. After several switches between open pages the
keyboard recovered so I could write this.
All this on Ubuntu Studio. Again an intermittent problem. Keyboard just
stopped working again and recovered after several minutes.
Has anyone else experienced this?
On 10/6/20 2:27 PM, Thomas George
The problem is extremely intermittent. I use the mouse many times a day
with no problem. Then unexpectedly the click does not work.
On 10/6/20 3:58 PM, to...@tuxteam.de wrote:
On Tue, Oct 06, 2020 at 02:27:10PM -0400, Thomas George wrote:
Mouse clicks don't work though mouse moves the pointer
Mouse clicks don't work though mouse moves the pointer.
This happens infrequently, once in a day or two. I am using two pc's, a
raspberrypi and a Ubuntu Studio each with its own Logitech usb keyboard
and have experienced this problem on both systems.
I have tried to recover with various
systemctl status sound-card1.device
sound-card1.device - /sound/card1
Loaded: Loaded
Active: inactive (dead)
System is Buster Debian 4.19.98-1
Upon reboot to Strectch Debian 4.9.38-2 sound works fine. Where should I
look to correct the problem in Buster?
Wait for a new update? It happened before.
In the meantime I am forwarding the emails to thunderbird on a
raspberrypi desktop. On that thunderbird the links can be opened.
On 2/19/20 6:06 PM, Boas Kirui wrote:
what do I do now,should I re-enable the virtual syscall?
Obviously I can view html files with any of the browsers. It is not
always convenient. If I save an interesting web page by right clicking
on save as the result is a often a very long file name containing
spaces. I save these html files in various directories according to
subject. if I
OK, if wifi connectivity is in the Raspbian kernel I'll ask for their help.
On 11/30/19 2:29 PM, Reco wrote:
Hi.
On Sat, Nov 30, 2019 at 02:16:30PM -0500, Thomas George wrote:
I think this is basically a Debian problem. Octopi-buster-lite is a
program to control 3D printers
not rewrite them. The solution to my problem must lie
in properly setting up Debian's wireless programs.
On 11/30/19 1:19 PM, Jonas Smedegaard wrote:
Quoting Thomas George (2019-11-30 18:53:50)
There are two years of posts of this problem to the Octopi users group.
I have read many and tried
There are two years of posts of this problem to the Octopi users group.
I have read many and tried various solutions without success.
The solution should be easy. With the headless octopi-buster-lite-0.17.0
as the operating system installed in raspberrypi 3 B+ I find:
iwlist wlan0 scan finds
highlighted. I clicked mouse, logged in and am back to
the lxde desktop. Sound still ok. Many files are back but the newest
work done while I was still using the gnome desktop are missing. I'll
recover and am good to go!
On 9/20/19 2:58 PM, Thomas George wrote:
No sound after upgrade to Buster
No sound after upgrade to Buster
Switched from lxde to gnome to use gnome/sound speaker test - Still no sound
Rebooted to old stretch on another hard drive - had sound, output
changed to line out.
Rebooted to Buster. No sound and trapped in gnome. selection of desktops
shows at sign in but
At login after booting up there is a symbol like a gear below the
password entry line. I moved the mouse and clicked on this symbol.
Several options appeared and I decided to try Classic Gnome. This worked
but the next time I booted up the mouse was frozen. The symbol to change
desktops is
After upgrading from Stretch to Buster no sound
Rebooted to Stretch, sound works fine
The difference: Choice of outputs in Stretch includes lineout- built in
audio. This option is missing in Buster
How can I correct this?
Checked archives, installed pavucontrol but this did not help. Any
suggestions?
I remember changing the cmos battery some years ago. Maybe time to do it
again.
No storms preceding, during and after the described failure. Ups shuts
down system after 30 seconds if there is a power failure.
On 05/06/2018 05:02 PM, songbird wrote:
Thomas George wrote:
...
Box is between
supply..
My records show I assembled this box from components in 2008. Should I
be worried? Expected lifetimes of cpu, mb, power supply?
On 05/06/2018 12:14 PM, Thomas George wrote:
Selected shutdown from the window manager and the operating system
turned off the computer as usual. Tried
Selected shutdown from the window manager and the operating system
turned off the computer as usual. Tried to restart the computer from the
switch on the desktop box but it was totally dead.
Where to look for the failure? CPU, motherboard, power supply or
mechanical switch?
I never thought
OK and thanks. I will do that
On 03/02/2018 05:16 AM, Curt wrote:
On 2018-03-02, Thomas George <li...@tomgeorge.info> wrote:
I think this should work. For the present I have moved on to other
tasks. The printer has a usb connection to the pc so I can print as
needed. Others on the lan
manually the PC's
network-address to 192.168.1.x, connect to the printer and change its IP to
192.168.2.x. Then, of course, you will loose the connection, but the printer
will be in the desired network. Don't forget to change IP-configuration of
your PC, and connect to the router.
Bernd
Thomas George
On 02/28/2018 07:34 AM, Dan Purgert wrote:
Curt wrote:
On 2018-02-28, Dan Purgert <d...@djph.net> wrote:
Thomas George wrote:
The printer has no physical control panel. I can only change the
settings if I can reach it through its IP address.
Many printers will print a &quo
On 02/27/2018 08:04 PM, Gene Heskett wrote:
On Tuesday 27 February 2018 16:21:59 Thomas George wrote:
I tried dnsmasq --dhcp-host=00:15:99:86:11:1F,CLP,192.168.2.13
and the response was "failed to create listening socket for port 53:
Address already in use." Tried several other
On 02/27/2018 01:24 PM, john doe wrote:
On 2/27/2018 7:07 PM, Thomas George wrote:
The Samsung CLP-320 printer's static ip 192.168.1.139 was set about
10 years ago to work on a lan using 192.168.1.x addresses. Last week
the lan's router failed and was replaced with a Netgear r6700 router
ts Network Configuration Report and got the same response.
Perhaps I don't understand or am using the wrong dnsmasq option?
On 02/27/2018 01:29 PM, Reco wrote:
Hi.
On Tue, Feb 27, 2018 at 01:07:17PM -0500, Thomas George wrote:
apt-cache search dhcpd finds udhcpd. My pc's system
The Samsung CLP-320 printer's static ip 192.168.1.139 was set about 10
years ago to work on a lan using 192.168.1.x addresses. Last week the
lan's router failed and was replaced with a Netgear r6700 router using
192.168.2.x addresses. The printer is now inaccessible from the lan.
Cups
Starting last month the PC Ethernet connection is sometimes not made
atbootup or is occasionally lost. When this happens the only way I
havefound to re-establish the connection is to turn the TP-Link AC1750
router off and on again.
The system is Debian Stretch.
The connection was just
Starting last week the PC Ethernet connection is sometimes not made at
bootup or is occasionally lost. When this happens the only way I have
found to re-establish the connection is to turn the router off and on again.
The system is Debian Stretch. I run apt-get update and apt-get
dist-upgrade
I bought an Asus Xonar DSX expecting it to work with my Debian Stretch
system, there was a recommendation on the Internet from someone using
Mint who said it worked right out of the box. Mine didn't.
I would like a really good sound card for my system and don't want to
make the same mistake
Ok, my mistake, I thought MM meant click on M to mute
That corrected but now no sound even from the onboard soundcard.
Everything looks like it should work. Pulseaudio volume control/Output
Devices shows three devices: HDMI, the DSX sound care with port
headphones and the Built-in Audio
me to /etc/libao.conf. which contains two
lines:
default_driver=alsa
quiet
Is there another setting other than quiet? But this can't be the
problem. ogg123 file.ogg plays file when the line out cable is connected
to the onboard sound card.
On 11/17/2017 02:03 AM, deloptes wrote:
Thomas
wish alsa had a signal strength monitor. Maybe I should reinstall
pulseaudio.
On 11/16/2017 11:44 AM, Jeroen Mathon wrote:
It is called, pavucontrol
On Thu, 16 Nov 2017, 17:43 Thomas George, <li...@tomgeorge.info
<mailto:li...@tomgeorge.info>> wrote:
I would
not by alsamixer. Remember pulseaudio when
installed manages alsa and not the other way around.
On Wed, 15 Nov 2017, Thomas George wrote:
Date: Wed, 15 Nov 2017 18:21:07
From: Thomas George <li...@tomgeorge.info>
To: debian-user@lists.debian.org
Subject: Re: No Sound - Puzzle
Resent-Dat
mutes all
output channels.
Return to desktop pulse audio volume control, monitor continues to show
strong active playback levels even though alsamixer thinks all output
channels muted!
The music goes down and around and comes out nowhere!
On 11/15/2017 03:35 PM, Thomas George wrote:
I just
I just installed an Asus Xonar DSX pcie card. Alsamixer recognizes it
and PulseAudio Volume Control show a strong signal level during playback
but no sound from the speakers. The system works with the onboard Nvidia
sound, no problems.
I assume the problem is a missing linux driver for the
were an education explaining why it did not work as
expected.
On 11/14/2017 11:07 AM, Thomas George wrote:
The problem is editing long file names to shorten them. An example
group of file names is attached.
The bash script copied from BashScripting is attached. This script
works perfectly
The problem is editing long file names to shorten them. An example group
of file names is attached.
The bash script copied from BashScripting is attached. This script works
perfectly with simple deletions, for example TrimLine.sh "College" ""
will remove College from each line in File.txt.
I have tried ping 192.168.1.225 followed by arp -a
and I have tried netstat -r
Neither report ip addresses of attached devices.
I know there are two devices besides this pc and I know the address of
one of these devices. I can ping it and it responds.
How to find the address of the second
I downloaded flash-player-ppapi_26.0.0.137-1_amd64.deb into /opt and
used dpkg -i to install it.
Is this the best way to do it? dpkg -s flash-player-ppapi responds ok
installed but dpkg -p flash-player-ppapi doesn't recognize it.
An attempt to log in to the Bridgebase website fails.
Login using firefox ESR results in an all blue screen. The firefox
plugin shockwave flash is installed.
My system is debian stretch using the LXDE desktop. I have also
installed gnash, gnash-common, and browser-plugin-gnash in an attempt
to
On 07/28/2017 09:34 AM, Wilko Fokken wrote:
On Wed, Jul 26, 2017 at 03:29:09PM -0400, Thomas George wrote:
VLC audio message: vdpau_avcodec generic error: decoder profile not
supported: 7
I have also tried playing the video with mpv which gives a different error
message:
[lavf] Edit lists
VLC audio message: vdpau_avcodec generic error: decoder profile not
supported: 7
I have also tried playing the video with mpv which gives a different
error message:
[lavf] Edit lists are not correctly supported (FFmpeg issue)
My system is Stretch. ogg123 plays ogg files with not problem
On 06/26/2017 05:01 PM, Ralph Katz wrote:
On 06/26/2017 02:29 PM, Thomas George wrote:
The command pavucontrol returns an error message:
error while loading shared libraries: libgtkmm-3.0.so-1: cannot open
object file: No such file or directory.
Where can I find this missing file?
I
The command pavucontrol returns an error message:
error while loading shared libraries: libgtkmm-3.0.so-1: cannot open
object file: No such file or directory.
Where can I find this missing file?
I checked apt-get install libgtkmm-3.0-1 The response was latest version
installed.
I tried
Two computers, an old pc with Debian Stretch and a new Raspberry Pi with
the raspbian jessie operating system.
The old pc prints to a lan printer with no problem. The lpstat -t shows
the identical set up on the Raspberry Pi but a command lp test.txt
results in no printer output although the
92 matches
Mail list logo
