Hello Tony,
The initial standard (for ALE and ALE400) frequency is 1625 Hz, but you can
choose another frequency in ALE400 (in ALE (141A) it is better not to change
this initial frequency).
73
Patrick
- Original Message -
From: Tony
To: digitalradio@yahoogroups.com
Sent:
Hello Ian,
Here is some information about PSK Packet.
Important: in BPSK63 Packet, set the FRACK option at, at least, 8 seconds
(the standard 5 sec is not sufficient).
73
Patrick
Coding/Decoding of Packet BPSK1200 and new modes Packet BPSK250 and BPSK63
The BPSK1200 Packet mode is used for
Hello Scott,
non-selective QSO in ARQ FAE
It is to call any Ham, mainly for a QSO.
selective QSO in ARQ FAE
To call some precise Ham (for eaxmple, to leave a message to an ARQ FAE
beacon).
wanted to try ALE400 but find the MultiPSK interface fairly impenetrable,
i.e. if you don't mind me
Its not a unique problem.
KT4WO
On 8/31/09, Tony d...@optonline.net wrote:
Trip,
Sounds like you have a unique problem with ALE-400. Hope you find out what
it is and please let us know when you do. Sorry we couldn't help you.
Tony -K2MO
- Original Message -
From: Thomas
Hello Sholto and all,
The minimum S/N is -11.5 dB (-13 dB with many repetitions).
ARQ FAE is an asynchronous system (synchronous systems as Pactor are not
possible under Windows, as it is impossible to control the timing of each
sample (but it was possible under DOS)). So to lose temporary
John,
Yes, in the big majority of QSOs, it is rare to find a long period of deep QSB.
However...
But to leave a message to an ARQ FAE beacon
(connection-transmission-disconnection), this problem does not appear, except
if the message carries a relatively big file, which will take much time to
Hello Andy,
For ALE, there is soft which name is ALE^STAT which is connected to an ALE
soft (PC ALE, MARS ALE or Multipsk) through a local TCP/IP loop and
automatically manages and forwards the sounding ALE information to a HFLINK
page (Channel zero).
With this principle, as RS ID and Call ID
On Mon, Aug 31, 2009 at 12:39:29AM -, ke4qcm wrote:
Hello All, I have a FT-100 and Rigblaster Plus-I can get the radio
to key up but there is no modulation/RF power/No signal being sent
out, can anyone help with this please? (I have the special Yaesu cable
(microphone jack on FT100 to back
Trip,
Its not a unique problem. KT4WO
Well it does seem to be unique problem because we haven't heard from anyone
else with major sync issues (yet). Your comments will hopefully, bring them out
of the woodwork. In my experience and in the experience of others, ALE-400 sync
issues happen
Patrick,
The initial standard (for ALE and ALE400) frequency is 1625 Hz
I'm glad the ALE-400 frequency is fixed at 1625Hz. There's less confusion;
you only need to let the other party know the VFO dial frequency ; )
Tony -K2MO
- Original Message -
From: Patrick Lindecker
Has anyone tried keyboard-to-keyboard connected BPSK63? (I assume that it is
connected and not UI, as we are talking about the FRACK option).
Also, am I correct that PAX/PAX2 will run in connected mode? For some reason I
thought they were UI-only, but now I cannot tell.
I'm interested in
Ian,
PSK packet acts as FSK packet. So you can use it to send APRS positions
(possibly from UIVIEW or from Multipsk) or in connected transmission. BPSK63
seems a bit slow for connected transmission, however it is possible.
Pax/Pax2 derives from Packet with a modulation close to Contestia. The
Just back from holiday, which version do I need for PSK-packet? I am
running 4.15 and do not see it.
Andy K3UK
On Thu, Aug 27, 2009 at 1:46 AM, kt4w...@gmail.com wrote:
MultiPSK... and its Packet but using BPSK63/250 instead of 300b FSK
Trip - KT4WO
- Original Message -
From:
Ive done some keyboard to keyboard BPSK63, and its much like BPSK31, except a
whole lot faster. HI. Not much difference, that way, unless each of you are
using MACROS, and the info comes across so much faster. I personally try to
type most of my QSOs to design them toward the guy I am
***If I'm not mistaken, you referred to the sync issue as a major problem that
happens 40-to-50 times during a QSO with S-9 plus signals both ways***
40 to 50 times during a QSO!!..WOW... Damn..I think If it occured that many
times during 1 QSO..I would give up..
Dont ya think
Look
What I dont understand, with all the reported contacts here on this group, why
I am not seeing ANY of them on the spot network? I would gladly give some of
them a listen, if they showed up there, but they are not. I have only recently
downloaded Multipsk, though am very experienced with some
After a little brain storming between myself, Joe N8FQ, and Laurie
VK3AMA, I have added a sked request feature to the K3UK Sked Page at
http://www.obriensweb.com/sked. The digitalradio sked page can
be accessed by clicking on the digitalradio tab/link. The Sked
Request link is fairly
Didnt you know Danny,,, There are hundreds of users on ALE400...
Making thousands of QSO's every day.
AND... none of them EVERY have a problem :)
Enjoy
Trip - KT4WO
- Original Message -
From: DANNY DOUGLAS
To: digitalradio@yahoogroups.com
Sent: Monday, August 31, 2009 9:01 PM
EVERmy bad
- Original Message -
From: DANNY DOUGLAS
To: digitalradio@yahoogroups.com
Sent: Monday, August 31, 2009 9:01 PM
Subject: Re: [digitalradio] ALE400
What I dont understand, with all the reported contacts here on this group,
why I am not seeing ANY of them
great conditions, 3 of us on now and looking for more at 0200Z
John
Ve5mu
Trip,
Trust me pal... been using ALE400 from the start...the outa-sync issue
is not just a
one time thing... and not just on QRP.
Im a big fan of ALE400 and MultiPSK(reg) ...BUT,,, , It IS a major issue.
When you have had it occur 40-50 times(with 20 over sig.)
..then tell me its not
John (VE5MU)
great conditions, 3 of us on now and looking for more at 0200Z
Nice to meet Terry (VE5TLW) on ALE-400. Thank you both for the nice contacts
and good luck with VE5EOC.
Tony -K2MO
- Original Message -
From: John Bradley jbrad...@sasktel.net
To:
22 matches
Mail list logo
