Try this one:
http://hamsoft.ca/pages/mmtty.php
Dave, N4QS
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of
w...@att.net
Sent: Saturday, January 23, 2016 1:31 PM
To: dx4win@mailman. qth. net
Subject: [Dx4win] MMTTY setup
Hi trying to setup MMTTY as
Luis,
You just need to place your license file in the main DX4WIN folder.
Dave, N4QS
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Luis
Teixeira
Sent: Friday, January 22, 2016 9:19 AM
To: DX4WIN Reflector
Subject: [Dx4win] Opening my Licensed
MMTTY can also make use of an external sound card such as Signalink USB or
any other sound card installed in your Windows software. Open the MMTTY
window in DX4WIN, select Option tab in MMTTY, then Soundcard tab and select
the sound card that you would like to use. As someone suggested earlier,
Ernie,
I too would like to see some updates from Paul. In the meantime, try this
to get JT44 contacts to update DXCC totals:
Go to Preferences, Awards, ensure that first tab - DXCC - is highlighted,
then in the lower left box, make sure that there is a check mark for JT44.
You can do the same
Use a %X to start transmission. Must be a capital X.
73,
Dave, N4QS
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Courtney
Judd
Sent: Sunday, January 17, 2016 3:52 PM
To: Dx4win@mailman.qth.net
Subject: [Dx4win] rtty
hi all need some help getting
with DX4Win.
73,
... Joe, W4TV
On 10/10/2013 2:08 PM, Dave Perry, N4QS wrote:
Lee,
I would also like to use 2Tone with DX4WIN. It already runs great
with N1MM. I have copied the 2Tone.exe file into the MMTTY directory
within DX4WIN as well as the 2Tone.ini file - but did not overwrite
benefit of including (or switching to) the *.ocx interface would be the
ability to replace the old PSKcore PSK31 support with MMVARI which would
instantly provide BPSK63/125 and MFSK as well as multi- channel PSK/MFSK
receive capability.
73,
... Joe, W4TV
On 10/10/2013 2:24 PM, Dave Perry, N4QS
it was designed...
TNX!
Hal
N4GG
On 7/30/2013 10:50 PM, Dave Perry, N4QS wrote:
Hal,
FWIW, I have never noticed any problems with the Band Map following my
K3 -- even on 6 meters. I assume that you have checked Follow the
Radio in the lower right corner of the band map window. When that
little
Hal,
FWIW, I have never noticed any problems with the Band Map following my K3 --
even on 6 meters. I assume that you have checked Follow the Radio in the
lower right corner of the band map window. When that little box is checked,
the band map should follow the radio. It works similar to the
Steve,
I wonder if you inadvertently hit the Clear QSL Date function under the QSLs
pull down menu. It can happen to the best of us. I do a daily backup for
just those sort of events.
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net
Is there an X5 file for the K3? I only have the X4 file. Can someone please
let me know if there is a new one?
Thank you.
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of k1uo Larry
Sent: Sunday, June 09, 2013
If you want to see all stations worked on a band, double click on the
appropriate band number on the top row. If you want to see all the stations
worked on a specific mode, click on the appropriate mode box in the first
column. If you want to see all stations worked for a particular country
Hi Evert,
Welcome to DX4WIN. It does not auto-connect, but it does save the most
recent dx-cluster that you connected to at the top of the list. So it is
easy to find your favorite the next time you start DX4WIN. I actually use
CC User by VE7CC to stay connected to may favorite cluster outside
Steve,
This doesn't answer your question, but I am wondering if you have considered
making your contest station call a second group within your master log?
There are several advantages if you do that. First, when you download from
Lotw, it will download both calls at once. It also allows you to
Yes, Rick is right. You just open up TQSL Cert and make a couple of clicks
with the mouse. Here are the instructions right out of the Lotw website:
Requesting A Signed Certificate
Once you have a certificate for your primary callsign you may have old calls
or secondary calls which you want to
I used Lotw for my operation in Belize. It was very easy to sign up. I
simply scanned a copy of my license from Belize and emailed it to the DXCC
desk at the ARRL. Everything was approved before I left. It couldn't have
been much easier. I plan to do the same thing when I go to Grand Cayman
frequency. I'm pretty sure this was the same
when I ran Win XP with the K3 and, before that, with the TS-850.
73,
John, N3AM
At 03:13 10/12/2012, Dave Perry, N4QS wrote:
Date: Thu, 11 Oct 2012 22:13:06 -0500
From: Dave Perry, N4QS n...@comcast.net
Subject: Re: [Dx4win] Radio Timeout
Sender: dx4win-boun
Tom,
I do not run Windows 7, but my K3 works great with DX4WIN. I run XP and I
use the K3 X4 file within DX4WIN as my radio file. I log everything in real
time without a problem. Feel free to email direct to discuss in more
detail.
Dave, N4QS
-Original Message-
From:
I followed the link and the download shows a zip file called tqsl-113.zip.
Look's like the new one to me. I did not try to unzip the file yet.
Dave, N4QS
- Original Message -
From: ON4AOI on4...@skynet.be
To: 'Jim Reisert AD1C' jjreis...@alum.mit.edu
Cc: dx4win@mailman.qth.net
Sent:
Fred,
I would create a group within your log for you new QTH. Just go to Filter,
Selection and create a new Group Filter. That way you can see all the
contacts with a given call that you made prior to AZ as well as from your
new QTH. This is especially handy if you keep the Same Call and
I am getting ready to order a Steppir yagi but want to make sure I order the
correct cables. I use both DX4WIN and N1MM for logging. DX4WIN has built in
support for controlling Steppir antennas. The documentation indicates that I
can continue to use COM1 to connect my pc to my K3 and then I can
Jim,
Just for the record, I uninstalled the lpt driver as you suggested. I then
reinstalled it under 8.04. However, it prompted me to install the driver in
the dx4w803\lptdriver folder -- which would have put it right back in the
folder that I had just uninstalled. So I merely typed in a
version 8.02.
Thanks,
Dave Perry, N4QS
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
Garry,
Click on Reports, Awards, WAZ tab and then uncheck the Lotw box in upper
left corner, then click OK.
Dave, N4QS
- Original Message -
From: Garry Shapiro ga...@ni6t.com
To: dx4win@mailman.qth.net
Sent: Wednesday, April 21, 2010 7:29 PM
Subject: Re: [Dx4win] WPX, WAZ, County
command SWH58 as he
suggested. Works fine now. Some people may want to norm their filters when
they go into split. Not me. I like keeping my filter settings for both RXs
the same.
Dave, N4QS
- Original Message -
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Dave Perry N4QS n
John,
I normally wait a while to upgrade, but took the plunge with ver 8.02. I
really like it. Fixed a number of small issues from the past, adds new
features like better integration with Lotw, band map, etc. I think most of
the bugs from version 8.01 are fixed with version 8.02.
By the
. The RX and TX
frequencies are being set properly by DX4WIN -- it is just that the filter
bandwidths are being reversed. I am using the Elecraft K3 X4 radio file.
Any help would be appreciate. Thanks.
Dave Perry, N4QS
__
Dx4win
Tony,
DX4WIN always opens on whatever band and mode my K3 is set on when the
software loads. Actually it opens to the last contact and then I just hit
F9 to clear and the software then reads the radio and lists the correct band
and mode. I am using the Elecraft K3 X4 radio file. That one
Thor,
Mine works okay in version 8.02. I just imported my SAC log into DX4WIN
with no problem. You must have a corrupted file of some sort.
Dave, N4QS
- Original Message -
From: Thorvaldur Stefansson otrada...@gmail.com
To: dx4win@mailman.qth.net
Sent: Sunday, September 20, 2009
Jim,
I tested sending CW from the keyboard with no problem. I simply use DX4WIN
as the device type and LPT1 as the port. Works great in both versions 7.07
and 8.01. The first two letters are not being joined. Using Windows XP.
Dave, N4QS
- Original Message -
From: Jim Reisert
Has this issue been fixed by Paul? Lotw uploaded QSOs should not be showing
as mailed (M) in the DXCC Listing.
Dave, N4QS
- Original Message -
From: DAVID DERAIN k8...@sbcglobal.net
To: dx4win@mailman.qth.net
Sent: Thursday, August 06, 2009 10:30 AM
Subject: [Dx4win] 8.01 REPORT
Dave,
I agree with your comments on the M issue.
This is a show stopper in my opinion. I do not see how I can manage sending
off QSL cards if Lotw uploads are displayed as M in the DXCC Listing. This
makes no sense. M should only appear when an actual QSL has been printed
and mailed.
Randy,
I too am excited that Paul finally implemented a start date for DXCC CW. I
also have QSOs dating back to 1967. I have been comparing the Summary
totals and the Listing totals for CW between ver 8.0 and 7.07. I personally
like the way that Paul has implemented the DXCC Listing for CW.
I have a new K3 and it works perfectly with DX4WIN. I have baud rate set at
4800 and poll rate at 1000 ms. I have Elecraft K3 X4 selected as radio
type.
Dave, N4QS
- Original Message -
From: Howard K2HK k...@arrl.net
To: n...@n3me.net; dx4win@mailman.qth.net
Sent: Sunday, June 28,
Bill,
I have also exported the two files in ADIF format and then used Excel to
compare the two. Very ease to open both files in Excel. You can then
resize the windows and reposition them side by side. You can then scroll
down and compare both. I had to do this a couple of times when Lotw
Jim,
I just downloaded country file #48 and then ran the utility to compare
DX4WIN totals to Lotw. Wanted you to know that everything updated
perfectly.
Award Modes: [MIX] [PHO] [CW] [RTTY]
Award Bands: [80] [40] [30] [20] [17] [15] [12] [10]
MIX: 311 matches
PHO: 215 matches
CW:
This is a test.
Dave Perry, N4QS
3600 Savoy Circle
Paducah, KY 42001
USA
From [EMAIL PROTECTED] Wed May 16 00:44:33 2007
From: [EMAIL PROTECTED] (Jeff Steinkamp)
Date: Wed May 16 00:54:22 2007
Subject: [Dx4win] Date Formats
Message-ID: [EMAIL PROTECTED]
I have the date format in the setup
37 matches
Mail list logo
