Hi!
I have tried to solve the problem when using TrueTTY and K3s APF.
Everything works fine without APF (using rev data) but if I turn APF on
I lose all the tracks on the waterfall. I have tried all mark and shift
combination. APF works ok with MMTTY but it is too clumsy program for me
so
Did you move the BNC cable as well?
Sent from my iPhone
...nr4c. bill
> On Feb 19, 2016, at 4:55 PM, Gary Smith wrote:
>
> Hi,
>
> I just connected the CBLP3Y cable to the P3 & K3s. The frequency
> shows on the P3 & the SVGA monitor but I see no signals on the
> waterfall.
In my case, I piggy-backed my 220 outlets from the Electric Dryer service.
Since I don't run the Dryer and the Amp at the same time, no problem.
73, Dick, W1KSZ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dauer,
Edward
Sent: Friday, February
At the time I bought the KPA500 I looked seriously at a number of
higher-power alternatives, including some from Tokyo Hy-Power I think it
was called, now QRT. I hired an electrician to assess what I would need
by way of AC mains wiring to support an amp safely. The current draw on
the
Elecraft already has a KPA1500 - just takes some effort on your part and some
Hard part is done .
4 KPA500 factory assembled from same production lot = 4 X 2300 or $9200
5 2 way 1.5 -54 mhz combiners capable 1 KW out (so cheap use both in and out-
includes dump loads) - 5 X $60 or $
How many people would it take to put $1000 or $2000 down toward a KPA1500
for Elecraft to produce it? I would, for one. And, I think I'm hearing
quite a few people who would be in line for one, even knowing that the amp
would be considerably more expensive than the KPA500. It sounds like a lot
It's an excellent reminder that, when things suddenly don't work as expected
be suspicious of any cables involved - even the best cables that have been
faithful performers for many years.
73, Ron AC7AC
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf
Hi Greg!
I have the Pro Audio Engineering PAE Kx33 supply that's
been running my KX3 and PX3 24/7 for several weeks. It
exhibits barely detectable warmth and I've not noticed any
"trash".
If you get one and expect to run both the KX3 and the PX3,
be sure to get the "splitter" addition for the
All,
I have what I think is an output issue with my K3 s/n 281. When set at 100W
output, I am getting the following approximate output values:
10m ~55w
12m ~40w
15m ~50w
17m ~60w
20m ~60w
40m ~70w
80m ~70w
160m~70w
My testing methodology involved connecting the
Wayne,
Is it fair to ask why the project was scrapped? Certification, cost,
production problems?
'73 de JIM N2ZZ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne
Burdick
Sent: Friday, February 19, 2016 8:36 PM
To: Doug Person
Cc:
There have been some Mac users posting lately and perhaps one of you can help
me out. Please reply off list
I found an old PowerPC 8500 and several old SCSI drives in external cases that
I want to check out before recycling. Problem is that I already recycled all
my video adaptors and SCSI
Elecraft sells the SS-30DV for $120. Powers the KX3 and amp.
I power everything in my station with the SPS-30DM which is a voltage
variable version with meter. Reliable, RFI quiet and fan quiet. Same
case as the SS-30DV. Available from Powerwerx.com, one of my favorite
vendors. A little more
I’ve been well satisfied with a Samlex SEC-1235M for the KX3 with a KXPA100 and
various other 12v stuff. Switcher efficiency without QRN.
73,
- Art KD6O
__
Elecraft mailing list
Home:
Well duh. I swapped the cable out to my dummy load, and everything works
fine now. .
That cable is going in the trash. Gary from Elecraft support has been
working with me today, but I just sent him an email and told him 'never
mind'.Phew!Sorry for the bandwidth. On to the KPA3A!
73,
What small sized power supply is recommended for use with the Elecraft KX3?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
On Feb 19, 2016, at 10:17 AM, Brian & Cyndi wrote:
> If you took the entire population of Earth and placed them in line to get a
> KPA1500, you know who would be at the very end of that line?
>
> Wayne Burdick.
>
> That man is QRP all the way.
A-men!
> Eric, OTOH, is a
The only thing that burns 1500 Watts at my QTH is the electric heater my
teenage daughter forgets to turn off half the time when she leaves for school.
The electric bill is already too high :)
Wayne
On Feb 19, 2016, at 9:51 AM, Doug Person via Elecraft
wrote:
> I
We ARE NOT planning to offer a new amplifier. Those photos were from 2006 :)
If we change our minds on this, we'll certainly let everyone know.
Wayne
N6KR
d
>> Petr,
>>
>> Don't sell anything right away. Elecraft has never given any indication
>> that they are interested in producing an
I would be very happy with a KPA1000.
Doug -- K0DXV
On 2/19/2016 2:02 PM, Clay Autery wrote:
I realize and agree with all of what you said... I would ONLY want to
see the piece produced if it made sense for both sides of the
equation... I wouldn't want anything to be done that might
I can confirm this in spades. 1,200 W to a tribander on a 70' tower
about 100' from the TV turned the screen red when I was on 15 and had
the antenna at about 260 [over the house]. No problems from about 300
to 230.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the Cal QSO
Did you remember to connect the coax cable between IF IN on the P3 and IF
OUT on the K3?
If so, check that cable for opens or shorts.
73, Ron AC7AC
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary
Smith
Sent: Friday, February 19, 2016
On Fri,2/19/2016 8:44 AM, Gmail wrote:
I have a FIOS Version router about 4 feet from my 1200 watt Ameritron Amp and
antenna feed lines. Router is about two years old. I have not had any issues,
either receiving or transmitting.
That's nice, but not very meaningful. Unless your amplifier
I knew there was a reason I liked Eric. :) I only run 100W, but I'm also
one of the guys who changed the WVDXC logo as a joke. If you go to the
web site, you'll see that the old (incorrect I've been told) Latin motto
"Semper Quaro" has been changed to "Semper QRO".
On Fri, 19 Feb 2016, Brian &
Hi,
I just connected the CBLP3Y cable to the P3 & K3s. The frequency
shows on the P3 & the SVGA monitor but I see no signals on the
waterfall. It was working fine with the K3 when I disconnected it and
it is now not working.
I do have RS232 configured to USB and I have made sure the jack &
Easy. Tap SPAN and set it to the width of the pileup.
Hold CENTER and rotate SELECT to move VFO A to the left side of the display.
If you are in Fixed VFO - Tracking Spectrum mode, CenterEn must be ON.
73,
Fred KE7X
For all KE7X Elecraft books see www.ke7x.com
I realize and agree with all of what you said... I would ONLY want to
see the piece produced if it made sense for both sides of the
equation... I wouldn't want anything to be done that might jeopardize
the company's viability/longevity.
I want them to be here LONG after I'm gone... Hopefully,
Lots of possible reasons why Elecraft might not do a 1500, but specifically
price breaks and unwillingness to adopt a product that from other
manufacturers has proven problematic at our price range for well understood
reasons. Elecraft has been conservative about introductions, and that plays
well
Eric, WA6HHQ, gave a presentation titled "High Performance Ham Radio:
Inside KPA500 & Elecraft K-Line" at various hamfests in 2011, including
Huntsville where I attended. He explained that before Elecraft settled
on the KPA500 they built three different sized prototype amplifiers for
proof
Thanks to Mark KE6BB..you must have data ready to send before the radio
will go into TXit works fine once you actually put something in for the
radio to TX.
Thanks
Tim
NZ8J
__
Elecraft mailing list
Home:
If you took the entire population of Earth and placed them in line to
get a KPA1500, you know who would be at the very end of that line?
Wayne Burdick.
That man is QRP all the way. Eric, OTOH, is a full legal limit guy, so
I'm sure the KPA500 is the compromise those two worked out.
73,
Hi John,
the Acom 1200S has not QSK so it is out of game unfortunately...
73 - Petr, OK1RP
-
http://ok1rp.blogspot.com
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA1500-tp7614288p7614334.html
Sent from the Elecraft mailing list archive at Nabble.com.
I think Elecraft, being in close proximity to Apple, has learned, as
apple has, how to keep its new products secret. Unless you could sneak
into Wayne's home laboratory, we will never know what he's cooking up
until the big reveal.
I would definitely be on-board for a bigger Elecraft amp.
On Fri,2/19/2016 5:14 AM, Bill wrote:
Behringer makes lots of audio toys - and they are affordable.
Yes, but they're NOT a good company, and should be avoided. Lousy
quality, lousy support, and well known to steal designs from REAL audio
companies.
The REAL companies are Shure, Rane,
On Thu,2/18/2016 6:30 PM, Mike Murray wrote:
If I recall correctly, the main signal was around S9 and the image at S7 or so.
I agree with W4TV that there is some sort of a setup problem. Things to
check: the assignment of the roofing filters, the settings for the
roofing filters, the
I have a FIOS Version router about 4 feet from my 1200 watt Ameritron Amp and
antenna feed lines. Router is about two years old. I have not had any issues,
either receiving or transmitting.
Ray
W8LYJ.
Sent from my iPad
__
Elecraft
Mike,
Glad to help and glad it made sense!
When you tune across an RTTY signal using your 400 Hz filter with the
dual passband filter turned off, first one shift, either Mark or Space
depending on the direction you are tuning, will enter the passband of
the filter and then both shifts.
Bill,
Excellent analysis and I suspect you are correct in exposing my current,
very limited knowledge of RTTY signals. Now that I think about the
problem, it makes sense that the radio is doing exactly what it is supposed
to when I hear the inverted tones 170 Hz down from the original signal.
I set up the current KX3 Utility and connected it to my KX3 to update the
firmware and it updated with no issues. I can also use the other functions
of the KX3 Utility to change memories, set time, set banner, etc. However,
I cannot seem to get the Terminal function to work. It will decode fine,
While a KPA-1500 or even a KPA-750 would be nice, Elecraft obviously has
their reasons for not manufacturing it. Perhaps well designed high power
SS amps are just too costly. Acom announced the 1200S last year and I have
yet to see one at a US dealer.
John KK9A
>From Gary vk1zzgary
Fri Feb 19
Mike,
What I see in your video is that you have the RTTY signal properly tuned
at 14,091.883. "Properly tuned" means that you have the Mark energy and
the Space properly aligned in the dual passband filter and the data
conveyed by the mark and space energy is being decoded and displayed.
Well the management have stated they will not be doing it so I guess you are
going to need a looong list
-Original Message-
From: "Clay Autery"
Sent: 20/02/2016 1:01 AM
To: "elecraft@mailman.qth.net"
Subject: Re: [Elecraft] KPA1500
Sh... We're starting a ground-swell...
__
Clay Autery, KG5LKV
KPA1500 Pre-Order #1
(318) 518-1389
On 2/19/2016 4:06 AM, Vic Rosenthal 4X6GP/K2VCO wrote:
> Petr,
>
> Don't sell anything right away. Elecraft has never given any
> indication that they are interested in
596
--
John Fritze Jr
K2QY
k...@arrl.net
ACACES president 2014
ARES ENY DEC Northern District
Hudson Div. Asst. Director
Twitter: @k2qy
401 261 4996 (cell)
__
Elecraft mailing list
Home:
David,
It sounds like your next best step is to contact support.
73,
Don W3FPR
On 2/19/2016 6:34 AM, aj4tf wrote:
Hello,
New build, K3S s/n 10669.
Everything went well, but when I got to the TX Gain calibration (low
power) something isn't quite right.
Using the K3 Utility (ver. 1.15.6.27),
Behringer makes lots of audio toys - and they are affordable.
Note: I no longer use them - sold/gave away all of them. With the K3
Equlizers I no longer needed them. Not only works better/easier - makes
the station far less cluttered. Thank you Elecraft!
Bill W2BLC K-Line
sounds very good and this is the idea to work DXP in split mode
but how can we do, simple mortals, that don´t know how to program?
Default P3 don´t allow to do that?
73,
Jorge
CX6VM/CW5W
2016-02-19 5:53 GMT-03:00 a45wg :
>
> Got my single sided Split working.
>
> The DX
Hello,
New build, K3S s/n 10669.
Everything went well, but when I got to the TX Gain calibration (low
power) something isn't quite right.
Using the K3 Utility (ver. 1.15.6.27), the utility says that the
"power won't settle" and won't get past the 160m band. Watching it,
the displayed power
In my continued looking and reading, I have been coming across rack-mount line
mixers. Since all I’m really trying to do is interconnect my equipment (the TX
and RX EQs in the K3 and KX3 seem to work fine for me) and since someone
mentioned the Shure SCM800, would there be any “gotchas” going
Don't know what I was thinking -- not 8 or 9 years. But a long enough
time that my comment is still correct.
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/
On 19 Feb 2016 12:06, Vic Rosenthal 4X6GP/K2VCO wrote:
Petr,
Don't sell anything right away. Elecraft has never given
Petr,
Don't sell anything right away. Elecraft has never given any indication
that they are interested in producing an amplifier bigger than the
KPA500. And the prototypes are 8 or 9 years old, if I remember
correctly, and they would have to change a lot in order to manufacture them.
73,
Got my single sided Split working.
The DX station is the bottom left hand side….
The Middle to right is the Zoo that calling this station.
My VFO-A is in Green - VFO-B in red…. Trying to see who gets picked up and then
to jump on the same frequency.
Thanks to those who assisted me….
OK guys, the cards are dealt.
I am going to check what I can sell...:)
597...to go only
73 - Petr, OK1RP
-
http://ok1rp.blogspot.com
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA1500-tp7614288p7614313.html
Sent from the Elecraft mailing list archive at
I find the P3 monitor a useful addition to my station and I believe that it
would be even more useful if the horizontal timebase could be extended. It has
a current maximum of 100mS which is fine for all but slow transmission modes
where a more extended time - perhaps 200mS or longer would be
53 matches
Mail list logo