All the fans in my station are overwhelmed by my air
conditioner and heat pump.
Sent from my iPhone
On Aug 8, 2010, at 14:07, Steve Ellington n...@carolina.rr.com wrote:
I believe those little fans are cheaper than a large aluminum heat sink. Did
you ever count how many fans are running in
The transistor is the most probable reason for the fuse blowing but the fuse
may save the other components and semi conductors as well as the circuit board.
The original query stated he would be using an Astron 35 which has a current
limiter but limiting the current to 35 amps will still allow
Jerry it sounds like a possible power supply problems. Have you tried a
different supply?
Sent from my iPhone
On Aug 16, 2010, at 11:28, Jerry Pittenger k...@columbus.rr.com wrote:
Well it looks like I have a problem.There is an intermittent buzz on the
speaker audio. When I turn on
I would expect a lossy vertical on the balcony to be less lossy than a wire
stapled to drywall and inside a building.
Sent from my iPhone
On Aug 24, 2010, at 8:04, Chris Wagner kf6...@gmail.com wrote:
Hi All,
I'm stuck in a 3rd floor condo and wonder if these tiny ATUs can
handle an end
If you are using a USB converter rather than a rs-232 connection it may be your
problem as many of the USB converters do not give you a full featured
connection.
Sent from my iPhone
On Jun 4, 2012, at 11:13, Terry Schieler terry.schie...@wirelessusa.com wrote:
David,
Your comments about
What Antenna are you using? Not only the balun needs to be rated for your
power but the coils and wire does too. Many mfgrs overrated their equipment.
For 500 watts use kw rated antennas. RG 213 is good but wire and loading need
to be #14.
Sent from my iPhone
On Jun 4, 2012, at 12:00,
I would recommend replacing the amp relay with a faster one or pin diodes as a
real fix but if you just want VOC CW you can lengthen the VOX delay so that the
VOX does not drop between characters.
Sent from my iPhone
On Jun 8, 2012, at 12:25, Vic, K2VCO k2vco@gmail.com wrote:
No, it's
of these things improve
the nulls.
They also reduce noise pickup on the feedline.
On 6/18/2012 5:26 AM, WILLIS COOKE wrote:
A note on folded back antennae. I have a 3 element SteppIR with the 30/40
kit. The
antenna is mounted at about 67 feet above the ground. I have compared the
folded
Scott, if you want the magic antenna that is easy to build, easy to install and
cheap, give up now. Any conductor will radiate to some extent and the
excellent antenna tuner in the K3 will load almost anything but there are
reasons why contesters buy acres of land and spend tens of thousand or
I bought an RS-232 card and gave up on the USB converter.
Sent from my iPhone
On Jul 16, 2012, at 10:38, PE3V ericvanderve...@hotmail.com wrote:
I am trying to setup a serial connection between an Elecraft K3, CWSkimmer
and
N1MM using com0com/hub4com.
I don't get it working. Anyone on
I think this is a question for the N1MM Yahoo group. Have you tried there?
Sent from my iPhone
On Jul 16, 2012, at 12:40, Eric Van der Velde ericvanderve...@hotmail.com
wrote:
I also use a serial port (COM1) for communication between te K3 and my
computer. The thing is that I have N1MM and
If you look at the spec sheet it does tell the power output. It Is two watts
nominal and four watts max at five volts. Maybe a QRPP rig?
Sent from my iPhone
On Jul 16, 2012, at 12:53, Fred Townsend ftowns...@sbcglobal.net wrote:
Oh it has pop rivets too? Ya! That's what I really want to lay
You do not get five volts from a thermocouple. Usually about 0.1 volts
depending on the type and temperature but you can connect many in series to
make a thermopile. If you are creative you can home brew your own stove,
blower and thermopile and be the first with DXCCWB (wood burning).
Sent
get on the air and will
be happy to exchange information and pictures.
Sent from my iPhone Willis Cooke, trustee for USS Stewart and USS Cavalla
On Aug 17, 2012, at 10:04, stan levandowski sjl...@optonline.net wrote:
We'll be taking three KX3s aboard the last surviving destroyer escort
mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis
@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis 'Cookie' Cooke
K5EWJ
paying for my K3.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
parallels mine that
happened nine years ago. I really wanted RF Parts to
redeem themselves, not so much for the $180 that I am
out for the tubes, but so that the ham community could
have a good reliable supplier for our amplifier parts.
Willis 'Cookie' Cooke
K5EWJ
and what not and put
transformers in a box in
the middle of the cable.
On Sun, 2008-03-16 at 05:57 -0700, WILLIS COOKE
wrote:
I don't know if it applies to your situation or
not
Raymond, but I had a lot of hum on when I
connected my
110V Lap top to my TS-850 for PSK-31. I had
, worked for me and doesn't
apply to most people.
Cookie, K5EWJ
--- Brett Howard [EMAIL PROTECTED] wrote:
Or you could just easily float the laptop then you'd
only have one
chassis ground.
On Sun, 2008-03-16 at 19:36 -0700, WILLIS COOKE
wrote:
Well I didn't plug it into my K3
to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis 'Cookie' Cooke
K5EWJ
/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis 'Cookie' Cooke
K5EWJ
to tune an amplifier after owning the same
amplifier with the same tubes for 30 years if you
like. You can buy your products from RF Parts if you
like. I hope that you do, you and RF Parts deserve to
do business with each other.
Willis 'Cookie' Cooke
K5EWJ
. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft
you
and you can put it up
if you want. What happens if you take the KPA out of
the software? If
the radio does not know it's there will it draw any
more than a base
radio?
K3 soon if the guesses on shipping are good.
Mike Sullivan
73 W5EEA
Willis 'Cookie
is a lot bigger than the 33
watt unit that we were discussing. 12 amps X 14 volts
is 168 watts. The 33 watt unit is less than 2.5 amps,
barely enough to run a transceiver continuously during
good sunlight.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing
with a 35 amp
battery would tell me that things were just about in
the right balance.
Willis Cookie Cooke, K5EWJ, PE
--- [EMAIL PROTECTED] wrote:
Hi
Actually 33 watts is more than enough to power a QRP
K2. You only transmit about 25 % of the time and
receive the rest so running a K2 at 10
Aspire 5610Z computer
running Vista.
Thanks for a very nice suite of programs.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
I think you are correct if one is running FSK but most
people, at least a lot of people these days are
running AFSK, so need linear amps. One would just
about have to build a Class C amp these days anyway.
I don't know of any on the market.
Cookie, K5EWJ
--- Cortland Richmond [EMAIL PROTECTED]
Frank, Ham Radio Delux has a code reader in its Beta
Version in its Digital Master 780 digital sub
program. It will copy hand sent Morse to a certain
extent, but I can not find a signal on 20 meters this
afternoon that it can copy as well as I can by ear.
The program does a good job with PSK-31
picking one and getting
started. Just don't try to learn with a keyboard, it
will not teach you anything except how to type, and
leave the Bugs alone until you approach 20 wpm, the
minimum code speed for which they were designed.
Willis 'Cookie' Cooke
K5EWJ
, 52 years a licensed ham and 55 years of
Morse, but still learning.
Willis 'Cookie' Cooke
K5EWJ
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
in 1975 and I as far as I can find out
still has very few that differ in opinion.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis 'Cookie' Cooke
K5EWJ
key. It is as easy to use as the J37 or J38, but
not as easy as the Bencher.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
people, so I am
counting on getting two. I pick On Spec and On
Budget.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
Have you been able to establish communication with Al
Gore? Did Al Gore invent this technology?
Cookie, K5EWJ
--- Bill W5WVO [EMAIL PROTECTED] wrote:
Aw, Keith let the cat out of the bag!
It was Schrodinger's cat, actually. :-) Might as
well fill you in as much as I
can...
Keith and
I have used the 80/40 combo for over 40 years. It
works great for 80, 40 and 15 and not bad for 10. It
does not work very well for 20, 17 and 12 and I have
had poor results trying to add a third element for 20
meters. I have had good results with and without a
balun. It may make some
. That usually works. I
don't know what technique I will use with my K3. I
will have to wait until I get it on the air to find
out. (December 27 order and still waiting).
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
___
Well, now I know of at least one order between the
December 21 order and mine on December 27. How many
more ordered their own Christmas Present?
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft
it sooner than if you order it tomorrow or next week,
or six months from now. If you still think you might
be happier with an Yaekencom then you should keep
thinking until you are satisfied with your choice.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft
Hi Augie, It seems that I misinterpreted your post
about 180 degrees. I answered thinking you were
waiting to order until there was no que, but
re-reading your post, I see that is not what you said.
I think it is what the person who started this thread
did say. Oh well, I sure hope that Katie
I'm not sure about the K3 because I don't have mine
yet, but all I have to do with my Kenwood TS-850 is
turn off the VOX and use the Send/Rec switch instead.
I don't do that, but it works. The side tone still
works, but it does not transmit.
Cookie, K5EWJ
--- Paul W5DM [EMAIL PROTECTED] wrote:
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
It does not give the same sideband on 80 and 20. You
also have to consider that the rotation of the tuning
capacitor of the VFO turns the opposite direction for
20 as it does for 80. You will find this on the dial
of many pre 1970 commercial offerings. Everyone needs
to use one of the old SSB
-850
and Yaesu FT-900 when you select SSB it puts you on
the preferred sideband, but if you press the button
again it puts you on the other sideband.
Cookie, K5EWJ
--- Ian White GM3SEK [EMAIL PROTECTED] wrote:
WILLIS COOKE wrote:
It does not give the same sideband on 80 and 20.
You also have
I got my Katiegram yesterday in the late afternoon.
Order for Kit Form, 100 watt version was placed in
late afternoon on December 27, so it was five months
plus one day. Second receiver, voice recorder and 500
Hz filter were back order.
Willis 'Cookie' Cooke
K5EWJ
in a week or so works very much
like the TS-850, preferably exactly like the TS-850.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
. The scuttlebutt has it that
the K3 is much better and I am ready for much better!
Cookie, K5EWJ
--- Fred Jensen [EMAIL PROTECTED] wrote:
WILLIS COOKE wrote:
I hope that
my K3 that will arrive in a week or so works very
much
like the TS-850, preferably exactly like the
TS-850
mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Willis
and hook up the 850. I can't say
that there was none on the 850, but much better. If
the K3 improves on that I will be in hog heaven!
Cookie
--- Fred Jensen [EMAIL PROTECTED] wrote:
WILLIS COOKE wrote:
Fred, my comment was directed at the frequency
changing method only. Of course I hope
Today I received my Madylingram and my UPS Notice that
my K3 ordered December 27, 2007 has been shipped, due
June 10.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
K3 ser # 1025, ordered 27 Dec arrived here in Texas
Tuesday, June 10. I have built it, but when I try to
calibrate the VCO I get Err VCO E5. I have
emailed support, but I am not sure if I will get an
answer today. Anybody seen that error and know what
it is?
Willis 'Cookie' Cooke
K5EWJ
hazard and I'm guessing that in the 110V
centre-tapped system since the
shock hazard is so much less, the next major hazard
is fire, so, I've often
You are right David. 110 VAC is much safer than 240V,
it can just barely kill you.
Cookie, K5EWJ
Willis 'Cookie' Cooke
K5EWJ
Maybe because it does have something to do with ham
radio.
--- Mike Harris [EMAIL PROTECTED] wrote:
G'day,
And why do the 1000+ worldwide subscribers to this
reflector need to be
belaboured by this love-in stuff which has nothing
whatsoever to do with
Elecraft products or their use?
Maybe the Wallyworld no slip pad is the answer for the
K3 as well. You can probably use the scrap left over
after you cut the piece for under your key!
Cookie, K5EWJ
--- Ken Kopp [EMAIL PROTECTED] wrote:
Hi Lee,
I think I'm pretty light-fingered, but mine sets on
a pad of
no-slip rubber
input to have a unique fist. Changing the keyer will
just sound like you changed the keyer.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
What operating system are you using Barry? I have been having similar problems
with XMlog. I am using Windows 7 and the USB cable with the Prolific chip and
driver. My computer is a HP Pavilion with 8 Gig RAM and the AMD processor.
Willis 'Cookie' Cooke
K5EWJ
input and maybe 20 watts output as guessed with a
40 watt light bulb about half brilliance.
Willis 'Cookie' Cooke
K5EWJ
From: Phil Hystad k7...@comcast.net
To: Elecraft@mailman.qth.net
Sent: Wed, November 18, 2009 11:23:06 AM
Subject: [Elecraft] Newbie
Have you looked at the Elecraft web site Tom? Most manuals are avialable for
download there, but I am not sure about the K144XV.
Willis 'Cookie' Cooke
K5EWJ
From: Radio Amateur N5GE n...@n5ge.com
To: Elecraft elecraft@mailman.qth.net
Sent: Wed, November 18
of support for XP
is going away. It is inevitable that some will have no difficulty at all and
others with different software and application needs will have a great deal of
trouble. Willis 'Cookie' Cooke
K5EWJ
__
Elecraft
What I want to know is where did you find an NL for your sweep. Inquiring
Texans want to know!
Willis 'Cookie' Cooke
K5EWJ
From: Jeff KB2M k...@comcast.net
To: Jim Brown j...@audiosystemsgroup.com; Elecraft List
elecraft@mailman.qth.net
Sent: Mon
, we try to get wisdom from some one
who might care. Sometimes it works, sometimes it is misunderstood as attacking
the hands that feed us.
Willis 'Cookie' Cooke
K5EWJ
From: Guy Olinger K2AV olin...@bellsouth.net
To: Dick Williams k8...@mho.com
Cc: elecraft
in the June 2009 QST for more info, but
don't rely on QST for the pin out on the relays.
Willis 'Cookie' Cooke
K5EWJ
From: Grant Youngman n...@tx.rr.com
To: Reflector Elecraft elecraft@mailman.qth.net
Sent: Sat, November 28, 2009 2:13:45 PM
Subject: Re: [Elecraft
will click and write
another email.
Willis 'Cookie' Cooke
K5EWJ
From: WILLIS COOKE wrco...@yahoo.com
To: AB3EN ab...@amsat.org
Sent: Sun, December 6, 2009 9:04:29 PM
Subject: Re: [Elecraft] [HAM] Windows 7 and LoTW
I had no difficulty installing
I read the warning note and it is from Microsoft. Apparently they have started
blocking web sites that don't pay their certificate fees. This is a bad omen
in my view.
Willis 'Cookie' Cooke
K5EWJ
From: WILLIS COOKE wrco...@yahoo.com
To: AB3EN ab
would prefer a compromise setting.
Willis 'Cookie' Cooke
K5EWJ
From: Don Wilhelm w3...@embarqmail.com
To: elecraft@mailman.qth.net
Sent: Sat, December 19, 2009 9:23:08 AM
Subject: Re: [Elecraft] [K3] Noisy K3 receiver
Maarten (and all),
There are two separate
My choice is a pair of $20 computer speakers. I use a pair of 10 year old
Labtecs which suit me just fine except that I don't particularly like the
modern look. But then I can't hear anythiing above 2700 Hz and I don't want to
hear anything below 300 Hz. YMMV!
Willis 'Cookie' Cooke
K5EWJ
may need to buy
another pair. Unfortunately, they do not have a balance control, but the K3
can be set up to use the sub receiver audio gain as a balance if I remember
correctly.
Willis 'Cookie' Cooke
K5EWJ
From: Julian, G4ILO julian.g4...@gmail.com
it.
Willis 'Cookie' Cooke
K5EWJ
From: W5UN w...@wt.net
To: elecraft@mailman.qth.net; lp-...@yahoogroups.com
Sent: Wed, December 23, 2009 8:10:25 PM
Subject: [Elecraft] ERR DVR
Today I lost power here at my home. When it was restored, I turned on
my K3
better on one antenna
than the other. Your other settings should ordinarily be the same for both
receivers with what ever other settings work best for you.
Willis 'Cookie' Cooke
K5EWJ
From: Jim Miller j...@jtmiller.com
To: Elecraft Reflector elecraft
don't want a
panadapter that uses my computer screen or my computer hardware. There are
several non-Elecraft options available for those who do prefer a computer
solution.
Willis 'Cookie' Cooke
K5EWJ
From: Richard Meilstrup r...@2830.dk
To: Elecraft
cell is pretty pricy. But I use the battery
strictly as a back up and operate from the power supply as a rule. The advice
that
someone gave you to back off to 50 watts or less when operating on battery is
good advice.
Willis 'Cookie' Cooke
K5EWJ
From
. On the down side,
the fan comes on with a 1 amp load and is noiser that I would like, but
liveable.
Willis 'Cookie' Cooke
K5EWJ
From: Wes Stewart n...@yahoo.com
To: elecraft@mailman.qth.net; Julius Fazekas n2wn phriend...@yahoo.com
Sent: Tue, January 5, 2010 1
that far,
but at least we can compare notes when I do.
Willis 'Cookie' Cooke
K5EWJ
--- On Sun, 12/7/08, Monty Shultes [EMAIL PROTECTED] wrote:
From: Monty Shultes [EMAIL PROTECTED]
Subject: [Elecraft] [K3] KEY OUT
To: elecraft@mailman.qth.net
Date: Sunday, December 7, 2008, 7:41 AM
I have
with weak signals between the TS-850 and the K3 are
that signals that are Q3 on the TS-850 are Q4 on the K3. Does not sound like
much, but is the difference between QSO and no QSO.
Willis 'Cookie' Cooke
K5EWJ
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft
, harmful at others.
I hope this helps.
Willis 'Cookie' Cooke
K5EWJ
--- On Mon, 12/15/08, DOUGLAS ZWIEBEL doug...@gmail.com wrote:
From: DOUGLAS ZWIEBEL doug...@gmail.com
Subject: [Elecraft] K3 sensitivity + preamp: looking for wisdom
To: Elecraft Reflector elecraft@mailman.qth.net
Date: Monday
accurate
measurements with jury rigged apparatus sometimes yields poor results.
Willis 'Cookie' Cooke
K5EWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
what kind of
plugs I need to buy for replacement.
Willis 'Cookie' Cooke
K5EWJ
--- On Sat, 12/20/08, aa1o aa1o.ra...@comcast.net wrote:
From: aa1o aa1o.ra...@comcast.net
Subject: [Elecraft] k3 matching filters
To: elecraft@mailman.qth.net
Date: Saturday, December 20, 2008, 2:30 PM
I received
. I will see how well that
works for me.
Tuning is not really a factor for me. If you buy a No Tune solid state amp
then need an antenna tuner you have not changed things a lot. But, will you
need new tubes in a month or so? How long will you be able to buy them?
Willis 'Cookie' Cooke
Sandy, did you ever take a look at what a kilowatt amp cost in 1955? It would
be more than than $3,000 when $3,000 was a year's pay for most.
Willis 'Cookie' Cooke
K5EWJ
--- On Sat, 12/20/08, Sandy ebj...@charter.net wrote:
From: Sandy ebj...@charter.net
Subject: Re: [Elecraft] OT: new SS
Kevin, just enter the CQWW-CW or the ARRL DXCW. Every contact will be 599
whether they can hear you or not!
Willis 'Cookie' Cooke
K5EWJ
--- On Mon, 12/22/08, Kevin Rock kevinr...@earthlink.net wrote:
From: Kevin Rock kevinr...@earthlink.net
Subject: [Elecraft] Firmware Request all rigs
was made at 7052 Khz.
Willis 'Cookie' Cooke
K5EWJ
--- On Tue, 12/23/08, w...@comcast.net w...@comcast.net wrote:
From: w...@comcast.net w...@comcast.net
Subject: [Elecraft] 50 and 100 DSP positions
To: Elecraft@mailman.qth.net
Date: Tuesday, December 23, 2008, 9:24 AM
Hi all,
On K3's #94
a blast. See our web
site for more info!
www.skccgroup.com Membership is free and we have a great time with our antique
keys!
Willis 'Cookie' Cooke
K5EWJ
--- On Wed, 12/24/08, Tom Hammond n...@embarqmail.com wrote:
From: Tom Hammond n...@embarqmail.com
Subject: [Elecraft] A K3 Variation
to the KAT3. An option that
allows any of the three connectors to be connected by a menu function would be
welcomed by me but is not available at this time as far as I can determine.
Willis 'Cookie' Cooke
K5EWJ
--- On Wed, 12/24/08, Frank R. Oppedijk f.opped...@avista.nl wrote:
From: Frank R
be a
JetStream.
Willis 'Cookie' Cooke
K5EWJ
--- On Thu, 12/25/08, Gary Smith g...@doctorgary.net wrote:
From: Gary Smith g...@doctorgary.net
Subject: [Elecraft] K3 power supply
To: elecraft@mailman.qth.net
Date: Thursday, December 25, 2008, 8:32 PM
I've been re-considering my power supply. I'm
It is a BNC Joe.
Willis 'Cookie' Cooke
K5EWJ
--- On Tue, 12/30/08, Joe Hoffman hoffmaninvestme...@adelphia.net wrote:
From: Joe Hoffman hoffmaninvestme...@adelphia.net
Subject: [Elecraft] Receive antenna connection
To: elecraft@mailman.qth.net
Date: Tuesday, December 30, 2008, 12:31 PM
I
them.
I doubt if turning the rig on and off will be a deciding factor.
Willis 'Cookie' Cooke
K5EWJ
--- On Tue, 12/30/08, JIM DAVIS nn...@astound.net wrote:
From: JIM DAVIS nn...@astound.net
Subject: [Elecraft] Any thoughts about rig LONGEVITY???
To: elecraft@mailman.qth.net
Date: Tuesday
Wayne, for those who complain that the K3 is not heavy enough I suggest that
you sell a battery box to attach to the bottom with a 100 amp hour gel cell.
That should make it heavy enough to give anyone a hernia.
Willis 'Cookie' Cooke
K5EWJ. K3 #1025 with separate emergency battery
Whatever you offer Wayne, be sure that it weighs at least 50 pounds. If you
have to, ballast it with a couple of cement blocks. You need to accommodate
the group that really wants a work out and would like a transceiver that
functions as a barbell as well as a ham radio.
Willis 'Cookie
That is called The Internet, I believe.
Willis 'Cookie' Cooke
K5EWJ
--- On Fri, 1/9/09, Alan Slusher aslus...@caribsurf.com wrote:
From: Alan Slusher aslus...@caribsurf.com
Subject: Re: [Elecraft] K3: SDR Cum Laude
To: 'Ken' barbiek...@yahoo.com, elecraft@mailman.qth.net
Date: Friday
antenna when B Set is
active. I hope that this helps, but a tutorial from one of the Elecraft guys
that really knows would be very welcome to me.
Willis 'Cookie' Cooke
K5EWJ
--- On Tue, 1/20/09, Brian Machesney nekvts...@gmail.com wrote:
From: Brian Machesney nekvts...@gmail.com
Subject
Zero Beat was never a problem when we all had 6 KC wide IFs and crystal
control. We just couldn't do it.
Willis 'Cookie' Cooke
K5EWJ
--- On Wed, 1/21/09, Ron D'Eau Claire r...@cobi.biz wrote:
From: Ron D'Eau Claire r...@cobi.biz
Subject: Re: [Elecraft] CW ZERO-BEATING WITHOUT BUTTON
that.
Willis 'Cookie' Cooke
K5EWJ
--- On Wed, 1/21/09, Sverre Holm la...@nrrl.no wrote:
From: Sverre Holm la...@nrrl.no
Subject: [Elecraft] HRD cw copy
To: elecraft@mailman.qth.net
Date: Wednesday, January 21, 2009, 3:18 PM
Simon (HB9DRV) wrote:
...but the Morse code decoding needs some work
Maybe Rose would like to add monogrammed shirts and jackets to her expanding
line of goodies.
Willis 'Cookie' Cooke
K5EWJ
--- On Fri, 1/23/09, Bob k...@att.net wrote:
From: Bob k...@att.net
Subject: Re: [Elecraft] Elecraft tee shirts
To: Simon (HB9DRV) si...@hb9drv.ch, Elecraft
Yea, REALLY OLD people like Tiger Wood.
Willis 'Cookie' Cooke
K5EWJ
--- On Fri, 1/23/09, Doug Faunt N6TQS +1-510-655-8604 fa...@panix.com wrote:
From: Doug Faunt N6TQS +1-510-655-8604 fa...@panix.com
Subject: Re: [Elecraft] Elecraft tee shirts
To: d...@w3fpr.com
Cc: elecraft
for backup, but I would
trade a well used TS 850 or a lightly used TS 440 for a second K3 without
hesitation
Willis 'Cookie' Cooke
K5EWJ
--- On Sun, 1/25/09, N1IX n...@verizon.net wrote:
From: N1IX n...@verizon.net
Subject: [Elecraft] Sub-receiver or 2 k3's
To: elecraft@mailman.qth.net
Date
think it will
tell you anything useful. With power on the amp, it might.
Willis 'Cookie' Cooke
K5EWJ
--- On Mon, 1/26/09, Stephen W. Kercel kerc...@suscom-maine.net wrote:
From: Stephen W. Kercel kerc...@suscom-maine.net
Subject: [Elecraft] Amplifier Input Impedance
To:
Cc: elecraft
1 - 100 of 562 matches
Mail list logo
