Am Sonntag 28 Juni 2009 01:31:04 schrieb Volker Armin Hemmann:
If you switch default compiler emerge -s world has to be done.
That should be -e instead, I guess? But no, it doesn't need to be done. The
only case we had were it was needed was the switch from 3.4.x to 4.x, because
of C++ ABI
meino.cra...@gmx.de wrote:
Hi,
after removing tetex and installing texlive-2008 by following
his guide
http://www.gentoo.org/proj/en/tex/texlive-migration-guide.xml
I run into a mysterious problem:
All my *.tex-files are handled as they would be written in
LaTeX. But they are good old
Am Sun, 28 Jun 2009 06:30:58 +0200
schrieb meino.cra...@gmx.de:
Hi,
after removing tetex and installing texlive-2008 by following
his guide
http://www.gentoo.org/proj/en/tex/texlive-migration-guide.xml
I run into a mysterious problem:
All my *.tex-files are handled as they would be
On Sunday 28 June 2009 05:47:23 Volker Armin Hemmann wrote:
On Sonntag 28 Juni 2009, Alex Schuster wrote:
Volker Armin Hemmann writes:
On Sonntag 28 Juni 2009, Alex Schuster wrote:
Or keep 4.3 as default, I don't think you could run into problems.
he will over time. If you switch
Hung Dang hungp...@gmail.com [09-06-28 10:27]:
meino.cra...@gmx.de wrote:
Hi,
after removing tetex and installing texlive-2008 by following
his guide
http://www.gentoo.org/proj/en/tex/texlive-migration-guide.xml
I run into a mysterious problem:
All my *.tex-files are handled as they
Sebastian Günther sam...@guenther-roetgen.de [09-06-28 10:32]:
Am Sun, 28 Jun 2009 06:30:58 +0200
schrieb meino.cra...@gmx.de:
Hi,
after removing tetex and installing texlive-2008 by following
his guide
http://www.gentoo.org/proj/en/tex/texlive-migration-guide.xml
I run into a
On Sonntag 28 Juni 2009, Alan McKinnon wrote:
On Sunday 28 June 2009 05:47:23 Volker Armin Hemmann wrote:
On Sonntag 28 Juni 2009, Alex Schuster wrote:
Volker Armin Hemmann writes:
On Sonntag 28 Juni 2009, Alex Schuster wrote:
Or keep 4.3 as default, I don't think you could run into
Dirk Heinrichs a écrit :
Am Samstag 27 Juni 2009 19:33:48 schrieb David Relson:
My workstation is an AMD64 and I want to build a 486 kernel. I've
tried oldconfig, menuconfig, and xconfig and they all change
the .config from X86_32 to X86_64. How do I stop this behavior?
make
Hello again,
Roger Mason rma...@mun.ca writes:
I need gcc 4.3 to compile a specific application. I am hoping that I
can install gcc 4.3 alongside 4.1.1 without suffering some awful
catastrophe.
Can someone confirm that I'll be able to use gcc 4.3 for the specific
application that needs it
On 6/28/09, meino.cra...@gmx.de meino.cra...@gmx.de wrote:
All my *.tex-files are handled as they would be written in
LaTeX. But they are good old plainTeX.
or in other words:
tex texfile.tex
ends up in errors due to the fact, that texfile.tex contains syntax
with LaTeX dont
Arttu V. arttu...@gmail.com [09-06-28 13:27]:
On 6/28/09, meino.cra...@gmx.de meino.cra...@gmx.de wrote:
All my *.tex-files are handled as they would be written in
LaTeX. But they are good old plainTeX.
or in other words:
tex texfile.tex
ends up in errors due to the fact,
Hi,
I have ran into this from time to time and it is really irritating to
say it lightly. When I use my DVD drive and eject the DVD, hal seems to
not unmount the device. That then causes me to get messages like this
in /var/log/messages:
Jun 28 03:10:15 smoker VFS: busy inodes on changed
On 6/28/09, meino.cra...@gmx.de meino.cra...@gmx.de wrote:
Arttu V. arttu...@gmail.com [09-06-28 13:27]:
man tex
When called as virtex it will use the plain format.
Not sure if this is what is called plainTeX, I've only used LaTeX.
Yes, it is...
tetex leaves the names of the
Arttu V. arttu...@gmail.com [09-06-28 13:52]:
On 6/28/09, meino.cra...@gmx.de meino.cra...@gmx.de wrote:
Arttu V. arttu...@gmail.com [09-06-28 13:27]:
man tex
When called as virtex it will use the plain format.
Not sure if this is what is called plainTeX, I've only used LaTeX.
On 6/28/09, Dale rdalek1...@gmail.com wrote:
A box should pop up and if you click the little button under
Maximum Archive Size, it should show the available options. Mine has
unlimited, 650Mb CD, 700Mb CD and custom. The custom will not let me
enter anything in Gb.
If by Gb you mean the
Arttu V. wrote:
On 6/28/09, Dale rdalek1...@gmail.com wrote:
A box should pop up and if you click the little button under
Maximum Archive Size, it should show the available options. Mine has
unlimited, 650Mb CD, 700Mb CD and custom. The custom will not let me
enter anything in Gb.
On Saturday 27 June 2009, Mark Knecht wrote:
On Fri, Jun 26, 2009 at 12:06 PM, Jacob Toddjaketodd...@gmail.com wrote:
You need to emerge xorg-server.
I'm about half way through now.
Isn't it correct to say that you just need to emerge x11-base/xorg-x11, which
will pull in
On Sun, 28 Jun 2009 14:00:55 +0100, Mick wrote:
Isn't it correct to say that you just need to emerge x11-base/xorg-x11,
which will pull in x11-base/xorg-server by default (unless you have
some fancy USE flags setup).
It will also pull in a shedload of dependencies, being a meta
Hi,
I am using rxvt-unicde and emacs-23, but the emacs
transient-mark-mode(highlight selected region) not work in rxvt,
but it works in xfce terminal,
the following are details
thanks!
[I] x11-terms/rxvt-unicode
Available versions: 9.02-r1 9.05 (~)9.05-r2 (~)9.05-r3 (~)9.06
{afterimage
On Sunday 28 June 2009, Neil Bothwick wrote:
On Sun, 28 Jun 2009 14:00:55 +0100, Mick wrote:
Isn't it correct to say that you just need to emerge x11-base/xorg-x11,
which will pull in x11-base/xorg-server by default (unless you have
some fancy USE flags setup).
It will also pull in a
On 6/28/09, Dale rdalek1...@gmail.com wrote:
Mine will only let me type in 3 numbers. Examples: 300 or 600 It will
not accept Gb or anything over 999
Try something starting with a '3', you should be able to feed in four
numbers. Anything starting with a four or greater will only get three
On 06/27/2009 07:24 PM, Andrew Gaydenko wrote:
On Sunday 28 June 2009 02:54:59 walt wrote:
On 06/27/2009 03:32 PM, Andrew Gaydenko wrote:
make.conf hasn't qt3support at all. Adding qt3support to qt-opengl
shows... well... something horrible (see below) :-)
Dale schrieb:
Hi,
I have ran into this from time to time and it is really irritating to
say it lightly. When I use my DVD drive and eject the DVD, hal seems to
not unmount the device. That then causes me to get messages like this
in /var/log/messages:
[...]
Since this happens every
On Sun, Jun 28, 2009 at 6:04 AM, Neil Bothwickn...@digimed.co.uk wrote:
On Sun, 28 Jun 2009 14:00:55 +0100, Mick wrote:
Isn't it correct to say that you just need to emerge x11-base/xorg-x11,
which will pull in x11-base/xorg-server by default (unless you have
some fancy USE flags setup).
It
On Sun, 28 Jun 2009 14:22:14 +0100, Mick wrote:
What's the 'right' way of installing Xorg on a machine that runs FB as
a WM?
Install xorg-server, anything else that's needed will be installed as a
dependency of xorg-server or your client software. The xorg-x11 meta
package was,AFAIR, created
On 2009-06-28, Mark Knecht markkne...@gmail.com wrote:
Exactly. My use of fluxbox on this machine was to test that X
is even working over S-Video. (It is.) My goal after that was
to emerge MythTV again and try running that.
Anybody running MythTV can't be too concerned about bloat. Myth
Hi,
I know this is WAY off topic for this list but there's a lot of
smart, experienced people here so I figured I'd look for a little
guidance and then possibly join another email list that's more
appropriate.
These days I'm trading stock index futures for a living. I have
data files that I
On Sun, Jun 28, 2009 at 9:28 AM, Grant Edwardsgra...@visi.com wrote:
On 2009-06-28, Mark Knecht markkne...@gmail.com wrote:
Exactly. My use of fluxbox on this machine was to test that X
is even working over S-Video. (It is.) My goal after that was
to emerge MythTV again and try running that.
On Sunday 28 June 2009 16:12:26 walt wrote:
On 06/27/2009 07:24 PM, Andrew Gaydenko wrote:
On Sunday 28 June 2009 02:54:59 walt wrote:
On 06/27/2009 03:32 PM, Andrew Gaydenko wrote:
make.conf hasn't qt3support at all. Adding qt3support to qt-opengl
shows... well... something horrible (see
On Sunday 28 June 2009, Neil Bothwick wrote:
On Sun, 28 Jun 2009 14:22:14 +0100, Mick wrote:
What's the 'right' way of installing Xorg on a machine that runs FB as
a WM?
Install xorg-server, anything else that's needed will be installed as a
dependency of xorg-server or your client
Mark,
Mark Knecht markkne...@gmail.com writes:
So the main question is what sort of language (and possibly
programming environment) should a complete novice look at to get his
feet wet with GUI programming. I'd like something fairly light -
performance probably won't be a huge problem -
Mark Knecht wrote:
These days I'm trading stock index futures for a living. I have
data files that I analyze in Excel over the weekend to help me make
decisions about how to trade the coming week, but I'm always fighting
Excel as it really isn't intended for the sort of math I want to do.
On Sun, Jun 28, 2009 at 9:49 AM, Roger Masonrma...@mun.ca wrote:
Mark,
Mark Knecht markkne...@gmail.com writes:
So the main question is what sort of language (and possibly
programming environment) should a complete novice look at to get his
feet wet with GUI programming. I'd like
On Sun, 28 Jun 2009 16:28:32 + (UTC), Grant Edwards wrote:
Anybody running MythTV can't be too concerned about bloat. Myth
requires X11 and Qt even for a headless backend server.
You only need the X libs, not the server. But anyone running a MythTV
backend will have plenty of disk space
On Sun, Jun 28, 2009 at 10:09 AM, pkpete...@coolmail.se wrote:
Mark Knecht wrote:
These days I'm trading stock index futures for a living. I have
data files that I analyze in Excel over the weekend to help me make
decisions about how to trade the coming week, but I'm always fighting
Excel
meino.cra...@gmx.de wrote:
/home/mccramervirtex texfile.tex
This is TeXk, Version 3.1415926 (Web2C 7.5.7)
%-line parsing enabled.
kpathsea: Running mktexfmt plain.fmt
I can't find the format file `plain.fmt'!
/home/mccramerlocate plainfmt.tex
Go to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Mark Knecht wrote:
Hi,
I know this is WAY off topic for this list but there's a lot of
smart, experienced people here so I figured I'd look for a little
guidance and then possibly join another email list that's more
appropriate.
These
pk pete...@coolmail.se [09-06-28 19:37]:
meino.cra...@gmx.de wrote:
/home/mccramervirtex texfile.tex
This is TeXk, Version 3.1415926 (Web2C 7.5.7)
%-line parsing enabled.
kpathsea: Running mktexfmt plain.fmt
I can't find the format file `plain.fmt'!
/home/mccramerlocate
On 2009-06-28, Neil Bothwick n...@digimed.co.uk wrote:
On Sun, 28 Jun 2009 16:28:32 + (UTC), Grant Edwards wrote:
Anybody running MythTV can't be too concerned about bloat. Myth
requires X11 and Qt even for a headless backend server.
You only need the X libs, not the server.
True.
But
Hello,
Roger Mason rma...@mun.ca writes:
I need gcc 4.3 to compile a specific application. I am hoping that I
can install gcc 4.3 alongside 4.1.1 without suffering some awful
catastrophe. This is the output of emerge on the machine in question:
The compilation finally completed. It only
On Sun, Jun 28, 2009 at 10:50 AM, Robert Bridgerob...@robbieab.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Mark Knecht wrote:
Hi,
I know this is WAY off topic for this list but there's a lot of
smart, experienced people here so I figured I'd look for a little
guidance and
Put it in localmount, not bootmisc, just before
ebegin Mounting local filesystems
No lvm but same problem: the two partitions sdb1, sdb2 aren't mounted
during boot, but are mountable by hand following login.
I added the sleep command to localmount and the partitions are now
mounted during
On Sun, 28 Jun 2009 18:03:35 + (UTC), Grant Edwards wrote:
But anyone running a MythTV backend will have plenty of disk
space anyway, so an extra few MB of libs that are unused after
initial setup is hardly the end of the world :)
It still grates on the engineering nerve a bit. ;)
On 6/28/09, Mark Knecht markkne...@gmail.com wrote:
Actually I'm liking the suggest to try using R. I have already managed
to read my data files using the read.csv function. When I understand
headers and tables better I'll likely be able to make my plots from
that data pretty easily. It's
On Sun, Jun 28, 2009 at 11:23 AM, Arttu V.arttu...@gmail.com wrote:
On 6/28/09, Mark Knecht markkne...@gmail.com wrote:
Actually I'm liking the suggest to try using R. I have already managed
to read my data files using the read.csv function. When I understand
headers and tables better I'll
On 06/28/2009 08:54 PM, Roger Mason wrote:
[...]
I followed the info presented at the end of the installation
Did you read the Gentoo documentation about upgrading GCC? If not,
now's the time :)
Mark Knecht schrieb:
[...]
These days I'm trading stock index futures for a living. I have
data files that I analyze in Excel over the weekend to help me make
decisions about how to trade the coming week, but I'm always fighting
Excel as it really isn't intended for the sort of math I want
All,
Is there a simple, quick way to list all of the packages that have
been emerged in cronological order?
-j
James wrote:
All,
Is there a simple, quick way to list all of the packages that have
been emerged in cronological order?
-j
genlop -l
qlop -l
signature.asc
Description: OpenPGP digital signature
On 06/28/2009 11:06 PM, James wrote:
All,
Is there a simple, quick way to list all of the packages that have
been emerged in cronological order?
for f in `ls -rt \`find /var/db/pkg -name *.ebuild\``; do basename $f
.ebuild; done
(The above command is just one line, in case your mail/news
On 06/28/2009 11:19 PM, Justin wrote:
James wrote:
All,
Is there a simple, quick way to list all of the packages that have
been emerged in cronological order?
-j
genlop -l
qlop -l
Or that :P :P :P
Thanks to you and Justin for the insanely quick answers.
-j
On Sun, Jun 28, 2009 at 4:23 PM, Nikos Chantziarasrea...@arcor.de wrote:
On 06/28/2009 11:06 PM, James wrote:
All,
Is there a simple, quick way to list all of the packages that have
been emerged in cronological order?
for f in
On Sun, 2009-06-28 at 23:23 +0300, Nikos Chantziaras wrote:
On 06/28/2009 11:06 PM, James wrote:
All,
Is there a simple, quick way to list all of the packages that have
been emerged in cronological order?
for f in `ls -rt \`find /var/db/pkg -name *.ebuild\``; do basename $f
.ebuild;
On Sun, Jun 28, 2009 at 1:05 PM, Florian
Philippli...@f_philipp.fastmail.net wrote:
Mark Knecht schrieb:
[...]
These days I'm trading stock index futures for a living. I have
data files that I analyze in Excel over the weekend to help me make
decisions about how to trade the coming week,
Florian Philipp wrote:
Dale schrieb:
Hi,
I have ran into this from time to time and it is really irritating to
say it lightly. When I use my DVD drive and eject the DVD, hal seems to
not unmount the device. That then causes me to get messages like this
in /var/log/messages:
Arttu V. wrote:
On 6/28/09, Dale rdalek1...@gmail.com wrote:
Mine will only let me type in 3 numbers. Examples: 300 or 600 It will
not accept Gb or anything over 999
Try something starting with a '3', you should be able to feed in four
numbers. Anything starting with a four or
On Sunday 28 June 2009 22:55:50 Dale wrote:
I just push the button on the drive. I have always done it that way.
At one time the eject thing in the KDE menu wouldn't actually eject. It
just sat there blinking at me. :/
Should I use the menu and not the button?
I think you should use KDE's
meino.cra...@gmx.de wrote:
...and dont forget to do a
ls -R . ls-R
in the according root directory, from where are all
*.fmt are installed, otherwise kpathsea will fail to find the file.
Oh yeah, forgot about that.
But what was the idea behind tex to behave like compiling/texing
Alan McKinnon wrote:
On Sunday 28 June 2009 22:55:50 Dale wrote:
I just push the button on the drive. I have always done it that way.
At one time the eject thing in the KDE menu wouldn't actually eject. It
just sat there blinking at me. :/
Should I use the menu and not the button?
Hi,
Nikos Chantziaras rea...@arcor.de writes:
On 06/28/2009 08:54 PM, Roger Mason wrote:
[...]
I followed the info presented at the end of the installation
Did you read the Gentoo documentation about upgrading GCC? If not,
now's the time :)
This is what it says:
# emerge -uav gcc
(Please
Hello,
James j...@nc.rr.com writes:
Is there a simple, quick way to list all of the packages that have
been emerged in cronological order?
Listing /var/log/portage with appropriate options to ls may work.
Cheers,
Roger
On Sun, 2009-06-28 at 15:58 -0500, Dale wrote:
Arttu V. wrote:
maxSliceSize-setMaxValue( 4096 );
Ahhh, so it isn't just me. That's cool. I'm not sure about editing
anything tho. I tend to break stuff. I'm just wanting to really fill
up a DVD is all.
I wonder why they changed
Hi all,
thanks for all your tips! Also found some inconsistencies in my
installation, which I was able to fix.
--
Regards,
Marco
On Sat, Jun 27, 2009 at 7:04 PM, Alan McKinnonalan.mckin...@gmail.com wrote:
On Saturday 27 June 2009 18:13:56 Marco wrote:
On Sat, Jun 27, 2009 at 2:33 PM,
How can I go about merging two bookmarks.html style files... and not
lose any or duplicate any?
I realize the de-duping part is probably not going to be all that
thorough so maybe just at some level, remove dups.
It seems with diff and patch I end up losing bookmarks. Also I'm not
so sure I
On 2009-06-28, Neil Bothwick n...@digimed.co.uk wrote:
On Sun, 28 Jun 2009 18:03:35 + (UTC), Grant Edwards wrote:
But anyone running a MythTV backend will have plenty of disk
space anyway, so an extra few MB of libs that are unused after
initial setup is hardly the end of the world :)
On 06/28/2009 10:16 AM, Mark Knecht wrote:
On Sun, Jun 28, 2009 at 10:09 AM, pkpete...@coolmail.se wrote:
Why Windows? I'm merely curious, not trying to criticize...
No offense taken. All the trading is done on the Windows platform
using proprietary trading platform apps. All the
On Sun, 28 Jun 2009 23:05:28 + (UTC), Grant Edwards wrote:
A curses setup program should please the frugal engineers, or would
you prefer to alter the MySQL table files with a hex editor? ;-)
I usually do one of three things:
1) Type SQL commands.
2) Use Mythweb.
3) Run
On 2009-06-29, Neil Bothwick n...@digimed.co.uk wrote:
You can't do stuff like channel scanning with the first two,
so running mythtv-setup over SSH is the only option, which
means you need qt3 and X libs on a headless server :(
I know. Making channel-scanning a separate text-mode
On 2009-06-29, Grant Edwards grant.b.edwa...@gmail.com wrote:
I should try out Freevo some day. It's written in Python, so
it should be more stable than MythTv. But, it doesn't support
my tuner yet, and it doesn't appear to support a separate
backend with multiple frontends.
I take that
On Sun, Jun 28, 2009 at 5:12 PM, waltw41...@gmail.com wrote:
On 06/28/2009 10:16 AM, Mark Knecht wrote:
On Sun, Jun 28, 2009 at 10:09 AM, pkpete...@coolmail.se wrote:
Why Windows? I'm merely curious, not trying to criticize...
No offense taken. All the trading is done on the Windows
On 06/28/2009 05:50 PM, Mark Knecht wrote:
On Sun, Jun 28, 2009 at 5:12 PM, waltw41...@gmail.com wrote:
On 06/28/2009 10:16 AM, Mark Knecht wrote:
On Sun, Jun 28, 2009 at 10:09 AM, pkpete...@coolmail.sewrote:
Why Windows? I'm merely curious, not trying to criticize...
No offense
On 06/28/2009 05:50 PM, Mark Knecht wrote:
I used to be an app maintainer for wine. I know about it and support
it but no longer us it...
Thanks for contributing to the wine project!
...I do however
STRONGLY support your right to become a full-time, fully automated
trader trading every day
Roger Mason writes:
Now gcc-config says:
garnet ~ $ gcc-config -l
[1] i686-pc-linux-gnu-4.1.1
[2] i686-pc-linux-gnu-4.3.2 *
Whereas gcc -v says:
snip
gcc version 4.1.1 (Gentoo 4.1.1-r3 p1.10)
If there is something else that I need to do then I did not see it in
the upgrade guide,
On Sun, 28 Jun 2009 12:18:26 -0600
Maxim Wexler maxim.wex...@gmail.com wrote:
Put it in localmount, not bootmisc, just before
ebegin Mounting local filesystems
No lvm but same problem: the two partitions sdb1, sdb2 aren't mounted
during boot, but are mountable by hand following login.
Howdy,
On ~x86 did the upgrade to qt 4.5.2 and get the following message:
After a rebuild or upgrade of Qt, it can happen that Qt plugins (such
as Qt
and KDE styles and widgets) can no longer be loaded. In this situation
you
should recompile the packages providing these plugins...
Roy Wright wrote:
Howdy,
On ~x86 did the upgrade to qt 4.5.2 and get the following message:
After a rebuild or upgrade of Qt, it can happen that Qt plugins (such
as Qt
and KDE styles and widgets) can no longer be loaded. In this situation
you
should recompile the packages providing these
76 matches
Mail list logo
