Re: [gentoo-user] wireless software config problem

On Thu, Sep 07 2017, allan gottlieb wrote: > On Thu, Sep 07 2017, Canek Peláez Valdés wrote: > >> On Wed, Sep 6, 2017 at 6:31 PM, allan gottlieb wrote: >>> >>> My system runs gnome3/systemd. I use NetworkManager, which is mostly >>> working fine. >>> >>> At work the desired

Re: [gentoo-user] wireless software config problem

On Thu, Sep 07 2017, Canek Peláez Valdés wrote: > On Wed, Sep 6, 2017 at 6:31 PM, allan gottlieb wrote: >> >> My system runs gnome3/systemd. I use NetworkManager, which is mostly >> working fine. >> >> At work the desired network is named "nyu". The sysadmins say I need to >>

Re: [gentoo-user] wireless software config problem

On Wed, Sep 6, 2017 at 6:31 PM, allan gottlieb wrote: > > My system runs gnome3/systemd. I use NetworkManager, which is mostly > working fine. > > At work the desired network is named "nyu". The sysadmins say I need to > change at least one security parameter. When I open the

Re: [gentoo-user] wireless software config problem

On Wed, Sep 06 2017, Mick wrote: > On Wednesday, 6 September 2017 22:29:29 BST allan gottlieb wrote: >> On Wed, Sep 06 2017, Alan McKinnon wrote: >> > On 06/09/2017 18:31, allan gottlieb wrote: >> >> My system runs gnome3/systemd. I use NetworkManager, which is mostly >> >> working fine. >> >>

Re: [gentoo-user] wireless software config problem

On Wednesday, 6 September 2017 22:29:29 BST allan gottlieb wrote: > On Wed, Sep 06 2017, Alan McKinnon wrote: > > On 06/09/2017 18:31, allan gottlieb wrote: > >> My system runs gnome3/systemd. I use NetworkManager, which is mostly > >> working fine. > >> > >> At work the desired network is named

Re: [gentoo-user] wireless software config problem

On Wed, Sep 06 2017, Alan McKinnon wrote: > On 06/09/2017 18:31, allan gottlieb wrote: >> My system runs gnome3/systemd. I use NetworkManager, which is mostly >> working fine. >> >> At work the desired network is named "nyu". The sysadmins say I need to >> change at least one security

Re: [gentoo-user] wireless software config problem

On 06/09/2017 18:31, allan gottlieb wrote: > My system runs gnome3/systemd. I use NetworkManager, which is mostly > working fine. > > At work the desired network is named "nyu". The sysadmins say I need to > change at least one security parameter. When I open the gui it shows > the network

Re: [gentoo-user] Wireless keyboard mouse

On February 17, 2017 6:00:56 AM GMT+01:00, the...@sys-concept.com wrote: >If I use wireless keyboard and mouse from same company can I use them >with three computers? > >My space is limited, and the boxes are close to each other; in addition >I have only one monitor. > >PC-1: PS/2(Keyboard+Mouse)

Re: [gentoo-user] Wireless DHCP takes over resolv.conf

The solution I use when dealing with the problem of network software overwriting '/etc/resolf.conf' is to make that file immutable with 'chattr +i'. Not quite an answer to your question on nameserver prioritization, but could be useful to prevent your nameservers from being changed. -- Marat

Re: [gentoo-user] Wireless DHCP takes over resolv.conf

On 11 July 2016 at 17:31, Alan McKinnon wrote: > On 11/07/2016 10:32, Emanuele Rusconi wrote: > > Wouldn't it be better to just use the same servers for both wired and > > wireless? It's what I use and it works flawlessly. > > It works flawlessly *for you*, but by no

Re: [gentoo-user] Wireless DHCP takes over resolv.conf

On 11/07/2016 20:13, Mick wrote: On Monday 11 Jul 2016 17:31:29 Alan McKinnon wrote: On 11/07/2016 10:32, Emanuele Rusconi wrote: Wouldn't it be better to just use the same servers for both wired and wireless? It's what I use and it works flawlessly. It works flawlessly *for you*, but by no

Re: [gentoo-user] Wireless DHCP takes over resolv.conf

On Monday 11 Jul 2016 17:31:29 Alan McKinnon wrote: > On 11/07/2016 10:32, Emanuele Rusconi wrote: > > Wouldn't it be better to just use the same servers for both wired and > > wireless? It's what I use and it works flawlessly. > > It works flawlessly *for you*, but by no means can you consider

Re: [gentoo-user] Wireless DHCP takes over resolv.conf

On 11/07/2016 10:32, Emanuele Rusconi wrote: > Wouldn't it be better to just use the same servers for both wired and > wireless? It's what I use and it works flawlessly. It works flawlessly *for you*, but by no means can you consider it correct or stable. There is no guarantee that a wired and

Re: [gentoo-user] Wireless DHCP takes over resolv.conf

Wouldn't it be better to just use the same servers for both wired and wireless? It's what I use and it works flawlessly. In that case you have at least a couple of options: The second line says: # /etc/resolv.conf.head can replace this line So, you can just put your preferred servers in the

Re: [gentoo-user] Wireless DHCP takes over resolv.conf

-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On 07/09/2016 03:25 PM, Mick wrote: > On Saturday 09 Jul 2016 11:34:59 Fernando Rodriguez wrote: >> On 07/09/2016 10:53 AM, Mick wrote: >>> Hi All, >>> >>> I just noticed my resolv.conf is topped up with the nameservers of the >>> wireless LAN I

Re: [gentoo-user] Wireless DHCP takes over resolv.conf

On Saturday 09 Jul 2016 11:34:59 Fernando Rodriguez wrote: > On 07/09/2016 10:53 AM, Mick wrote: > > Hi All, > > > > I just noticed my resolv.conf is topped up with the nameservers of the > > wireless LAN I happen to be associated at the time and my wired ethernet > > nameserver(s) are pushed

Re: [gentoo-user] Wireless DHCP takes over resolv.conf

-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On 07/09/2016 10:53 AM, Mick wrote: > Hi All, > > I just noticed my resolv.conf is topped up with the nameservers of the > wireless LAN I happen to be associated at the time and my wired ethernet > nameserver(s) are pushed further down. This

Re: [gentoo-user] wireless USB mouse via PS/2 adapter and KVM switch

On Saturday 28 November 2015 18:55:43 the...@sys-concept.com wrote: > I have a KVM witch IOGEAR that using old type PS/2 ports > I've tried to connect to it Wireless USB Mouse via USB-to-PS/2 adapter. > > It doesn't work :-/ And your question is? :) Anyway, about the issue you are seeing, this

Re: [gentoo-user] wireless interface problem in new installation

-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On 17/11/14 14:42, behrouz khosravi wrote: Hi. I was going to install gentoo on my laptop and since I needed an easy WPA2 wireless connection I used system rescue cd for installation. After finishing the installation when I booted gentoo the

Re: [gentoo-user] wireless interface problem in new installation

Hm, does wireless device require firmware? Have you installed firmware properly? I dont think so. I have installed gentoo on it before and back then I just used the genkernel and it was working.

Re: [gentoo-user] wireless interface problem in new installation

On Mon, Nov 17, 2014 at 3:32 PM, behrouz khosravi bz.khosr...@gmail.com wrote: Hm, does wireless device require firmware? Have you installed firmware properly? I dont think so. I have installed gentoo on it before and back then I just used the genkernel and it was working. What's the

Re: [gentoo-user] wireless interface problem in new installation

On Nov 17, 2014 7:32 PM, Alexander Kapshuk alexander.kaps...@gmail.com wrote: On Mon, Nov 17, 2014 at 3:32 PM, behrouz khosravi bz.khosr...@gmail.com wrote: Hm, does wireless device require firmware? Have you installed firmware properly? I dont think so. I have installed gentoo

Re: [gentoo-user] wireless interface problem in new installation

On Mon, Nov 17, 2014 at 6:58 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 7:32 PM, Alexander Kapshuk alexander.kaps...@gmail.com wrote: On Mon, Nov 17, 2014 at 3:32 PM, behrouz khosravi bz.khosr...@gmail.com wrote: Hm, does wireless device require firmware? Have

Re: [gentoo-user] wireless interface problem in new installation

On Mon, Nov 17, 2014 at 7:16 PM, Alexander Kapshuk alexander.kaps...@gmail.com wrote: On Mon, Nov 17, 2014 at 6:58 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 7:32 PM, Alexander Kapshuk alexander.kaps...@gmail.com wrote: On Mon, Nov 17, 2014 at 3:32 PM, behrouz

Re: [gentoo-user] wireless interface problem in new installation

On Nov 17, 2014 8:46 PM, Alexander Kapshuk alexander.kaps...@gmail.com wrote: On Mon, Nov 17, 2014 at 6:58 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 7:32 PM, Alexander Kapshuk alexander.kaps...@gmail.com wrote: On Mon, Nov 17, 2014 at 3:32 PM, behrouz khosravi

Re: [gentoo-user] wireless interface problem in new installation

On Mon, Nov 17, 2014 at 7:36 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 8:46 PM, Alexander Kapshuk alexander.kaps...@gmail.com wrote: On Mon, Nov 17, 2014 at 6:58 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 7:32 PM, Alexander Kapshuk

Re: [gentoo-user] wireless interface problem in new installation

On Nov 17, 2014 9:06 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 8:46 PM, Alexander Kapshuk alexander.kaps...@gmail.com wrote: On Mon, Nov 17, 2014 at 6:58 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 7:32 PM, Alexander Kapshuk

Re: [gentoo-user] wireless interface problem in new installation

On Mon, Nov 17, 2014 at 7:55 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 9:06 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 8:46 PM, Alexander Kapshuk alexander.kaps...@gmail.com wrote: On Mon, Nov 17, 2014 at 6:58 PM, behrouz khosravi

Re: [gentoo-user] wireless interface problem in new installation

On Mon, Nov 17, 2014 at 9:27 PM, Alexander Kapshuk alexander.kaps...@gmail.com wrote: On Mon, Nov 17, 2014 at 7:55 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 9:06 PM, behrouz khosravi bz.khosr...@gmail.com wrote: On Nov 17, 2014 8:46 PM, Alexander Kapshuk

Re: [gentoo-user] wireless dropping connections

On Tue, Oct 30, 2012 at 6:29 AM, Alan McKinnon alan.mckin...@gmail.com wrote: I'm using wicd-1.7.2.4-r1 and a NetGear DGN2200M v2 wireless AP (802.11n) Several times a day, this thing just drops wireless. Has it always done this? If not, did anything change around the time the problem

Re: [gentoo-user] wireless dropping connections

On Wed, 31 Oct 2012 15:01:26 -0500 Paul Hartman paul.hartman+gen...@gmail.com wrote: On Tue, Oct 30, 2012 at 6:29 AM, Alan McKinnon alan.mckin...@gmail.com wrote: I'm using wicd-1.7.2.4-r1 and a NetGear DGN2200M v2 wireless AP (802.11n) Several times a day, this thing just drops

Re: [gentoo-user] wireless dropping connections

On Tue, 30 Oct 2012 13:29:43 +0200, Alan McKinnon wrote: I'm using wicd-1.7.2.4-r1 and a NetGear DGN2200M v2 wireless AP (802.11n) Several times a day, this thing just drops wireless. I doubt it's my laptop as other devices in the house also get affected. Have you tried switching to a

Re: [gentoo-user] wireless dropping connections

outside interference? (usual is a microwave oven) - is there a device closer to the AP that stays in better lock because the signal is strong enough to override the interference? BillK On Tue, 2012-10-30 at 13:29 +0200, Alan McKinnon wrote: I'm using wicd-1.7.2.4-r1 and a NetGear DGN2200M v2

Re: [gentoo-user] wireless dropping connections

On Tue, Oct 30, 2012 at 01:29:43PM +0200, Alan McKinnon wrote: I'm using wicd-1.7.2.4-r1 and a NetGear DGN2200M v2 wireless AP (802.11n) Several times a day, this thing just drops wireless. I doubt it's my laptop as other devices in the house also get affected. When this happens I usually

Re: [gentoo-user] wireless dropping connections

On Tue, 30 Oct 2012 11:45:37 + Neil Bothwick n...@digimed.co.uk wrote: On Tue, 30 Oct 2012 13:29:43 +0200, Alan McKinnon wrote: I'm using wicd-1.7.2.4-r1 and a NetGear DGN2200M v2 wireless AP (802.11n) Several times a day, this thing just drops wireless. I doubt it's my laptop

Re: [gentoo-user] wireless dropping connections

On Tue, 30 Oct 2012 19:47:34 +0800 Bill Kenworthy bi...@iinet.net.au wrote: outside interference? (usual is a microwave oven) - is there a device closer to the AP that stays in better lock because the signal is strong enough to override the interference? There is a long range Siemens cordless

Re: [gentoo-user] wireless dropping connections

On 10/30/2012 9:26 PM, Alan McKinnon wrote: Actually, I hadn't tried that. I use channel 8 and this is at my house. I've only ever seen 2 other neighbour's APs show up and they both use channel 1. But then common sense kicked in. All previous APs have been 802.11g, this is the first 802.11g,

Re: [gentoo-user] wireless dropping connections

On Tue, 2012-10-30 at 21:26 +0200, Alan McKinnon wrote: On Tue, 30 Oct 2012 11:45:37 + Neil Bothwick n...@digimed.co.uk wrote: On Tue, 30 Oct 2012 13:29:43 +0200, Alan McKinnon wrote: I'm using wicd-1.7.2.4-r1 and a NetGear DGN2200M v2 wireless AP (802.11n) Several

Re: [gentoo-user] Wireless connection-sharing with networkmanager problem

On Tue, October 2, 2012 3:18 am, João Matos wrote: Dear list, I've been trying to get networkmanager working and use it to share my Internet connection with my Android. I have my wireless card working properly, since I can create a network with my phone and connect to it, using the

Re: [gentoo-user] Wireless connection-sharing with networkmanager problem

Sorry for not letting it clear. There are two parts at this website. The part I followed is *Part #2*. you can search for *Part #2*:. But it is too simple to be relevant. I have a desktop machine, witch is connected to a wireless router by a wired connection. But the wireless router is too far

Re: [gentoo-user] Wireless connection-sharing with networkmanager problem

João Matos jaon...@gmail.com wrote: Sorry for not letting it clear. There are two parts at this website. The part I followed is *Part #2*. you can search for *Part #2*:. But it is too simple to be relevant. I have a desktop machine, witch is connected to a wireless router by a wired connection.

Re: [gentoo-user] wireless newbee needs help

On 9 February 2012 17:00, Helmut Jarausch jarau...@igpm.rwth-aachen.de wrote: Hi, it's the first time I have to set up a wireless network on a notebook. Save yourself some hassle and use either wicd or NetworkManager - both wrap wpa_supplicant, and make for a much smoother mobile experience.

Re: [gentoo-user] wireless newbee needs help

On Thu, Feb 09, 2012 at 06:00:03PM +0100, Helmut Jarausch wrote: Hi, it's the first time I have to set up a wireless network on a notebook. How can I find out whether the connection is encrypted or not. wpa_gui tells me Authentication WPA2-PSK Encryption TKIP but

Re: [gentoo-user] wireless newbee needs help

tor 2012-02-09 klockan 18:00 +0100 skrev Helmut Jarausch: Hi, it's the first time I have to set up a wireless network on a notebook. How can I find out whether the connection is encrypted or not. wpa_gui tells me Authentication WPA2-PSK Encryption TKIP but iwconfig

Re: [gentoo-user] Wireless network card not loaded on first boot after shutdown

Am 03.11.2011 23:57, schrieb Mick: This sounds familiar. Please check with modinfo any options to switch off (e.g. QoS, or power management) when you're loading the module. modinfo only gives me this options # modinfo -F parm ath9k btcoex_enable:Enable wifi-BT coexistence blink:Enable LED

Re: [gentoo-user] Wireless network card not loaded on first boot after shutdown

Am 02.11.2011 20:39, schrieb Canek Peláez Valdés: Does the wireless card needs a firmware? Do you use an initramfs? I ask since my iwlagn wireless car does, and if I boot using an initramfs, I need to include the firmware file on it for the card to work. No the card need no firmware. I

Re: [gentoo-user] Wireless network card not loaded on first boot after shutdown

On Thursday 03 Nov 2011 13:16:40 Sebastian Beßler wrote: Am 02.11.2011 20:39, schrieb Canek Peláez Valdés: Does the wireless card needs a firmware? Do you use an initramfs? I ask since my iwlagn wireless car does, and if I boot using an initramfs, I need to include the firmware file on it

Re: [gentoo-user] Wireless network card not loaded on first boot after shutdown

On Wed, Nov 2, 2011 at 3:29 AM, Sebastian Beßler sebast...@darkmetatron.de wrote: Hi, I have a wireless card that works most of the time perfect with the ath9k kernel module but not on first boot after a few hours long shutdown.  * Bringing up interface wlan0  *   ERROR: interface wlan0

Re: [gentoo-user] Wireless Configuration...

On Friday 09 Sep 2011 14:31:23 BRM wrote: - Original Message - From: Mick michaelkintz...@gmail.com Subject: Re: [gentoo-user] Wireless Configuration... OK, so if you restore the two lines and this error goes away, can you then initialise the device without any other errors

Re: [gentoo-user] Wireless Configuration...

- Original Message - From: Mick michaelkintz...@gmail.com Subject: Re: [gentoo-user] Wireless Configuration... OK, so if you restore the two lines and this error goes away, can you then initialise the device without any other errors? So far as I am aware. Assuming that rfkill

Re: [gentoo-user] Wireless Configuration...

On Thursday 08 Sep 2011 04:52:44 BRM wrote: - Original Message - From: Mick michaelkintz...@gmail.com Hmm ... what is the error/warning that comes up? pneumo-martyr wpa_supplicant # /etc/init.d/net.wlan0 start * Bringing up interface wlan0 * Starting wpa_supplicant on

Re: [gentoo-user] Wireless Configuration...

- Original Message - From: Mick michaelkintz...@gmail.com On Thursday 08 Sep 2011 04:52:44 BRM wrote: - Original Message - From: Mick michaelkintz...@gmail.com Hmm ... what is the error/warning that comes up? pneumo-martyr wpa_supplicant # /etc/init.d/net.wlan0

Re: [gentoo-user] Wireless Configuration...

OK, so if you restore the two lines and this error goes away, can you then initialise the device without any other errors? Assuming that rfkill shows all is unlocked and the device active, what does iwlist wlan0 scan show now? -- Regards, Mick signature.asc Description: This is a digitally

Re: [gentoo-user] Wireless Configuration...

- Original Message - From: Mick michaelkintz...@gmail.com On Tuesday 06 Sep 2011 15:24:33 BRM wrote: - Original Message - From: Mick michaelkintz...@gmail.com On Saturday 03 Sep 2011 15:14:27 BRM wrote:   - Original Message - I think the above should be

Re: [gentoo-user] Wireless Configuration...

On Wed, Sep 7, 2011 at 9:54 AM, BRM bm_witn...@yahoo.com wrote: From: Mick michaelkintz...@gmail.com On Tuesday 06 Sep 2011 15:24:33 BRM wrote: I don't know if one is causing a clash with the other, so don't try to use both at the same time.  If wicd is started automatically when you

Re: [gentoo-user] Wireless Configuration...

- Original Message - From: Mick michaelkintz...@gmail.com To: gentoo-user@lists.gentoo.org Cc: Sent: Tuesday, September 6, 2011 5:32 PM Subject: Re: [gentoo-user] Wireless Configuration... On Tuesday 06 Sep 2011 15:24:33 BRM wrote: - Original Message - From: Mick

Re: [gentoo-user] Wireless Configuration...

- Original Message - From: Mick michaelkintz...@gmail.com On Saturday 03 Sep 2011 15:14:27 BRM wrote: - Original Message - Assuming that you have built in your kernel or loaded the driver module for your NIC and any firmware blobs have also been loaded, please show:

Re: [gentoo-user] Wireless Configuration...

On Tuesday 06 Sep 2011 15:24:33 BRM wrote: - Original Message - From: Mick michaelkintz...@gmail.com On Saturday 03 Sep 2011 15:14:27 BRM wrote: - Original Message - I think the above should be either: ctrl_interface=/var/run/wpa_supplicant

Re: [gentoo-user] Wireless Configuration...

- Original Message - From: Mick michaelkintz...@gmail.com To: gentoo-user@lists.gentoo.org Cc: Sent: Friday, September 2, 2011 11:29 AM Subject: Re: [gentoo-user] Wireless Configuration... On Friday 02 Sep 2011 14:38:56 BRM wrote: - Original Message - From: Canek

Re: [gentoo-user] Wireless Configuration...

On Saturday 03 Sep 2011 15:14:27 BRM wrote: - Original Message - From: Mick michaelkintz...@gmail.com To: gentoo-user@lists.gentoo.org Assuming that you have built in your kernel or loaded the driver module for your NIC and any firmware blobs have also been loaded, please show:

Re: [gentoo-user] Wireless Configuration...

On Thu, Sep 1, 2011 at 11:52 PM, BRM bm_witn...@yahoo.com wrote: I still haven't decided what to get for my system to replace the NIC with, but the card I have should be working with my existing 802.11g network already; however, it doesn't - I have had to connect my laptop via Ethernet

Re: [gentoo-user] Wireless Configuration...

- Original Message - From: Canek Peláez Valdés can...@gmail.com On Thu, Sep 1, 2011 at 11:52 PM, BRM bm_witn...@yahoo.com wrote: I still haven't decided what to get for my system to replace the NIC with, but the card I have should be working with my existing 802.11g network

Re: [gentoo-user] Wireless Configuration...

On Friday 02 Sep 2011 14:38:56 BRM wrote: - Original Message - From: Canek Peláez Valdés can...@gmail.com On Thu, Sep 1, 2011 at 11:52 PM, BRM bm_witn...@yahoo.com wrote: I still haven't decided what to get for my system to replace the NIC with, but the card I have should

Re: [gentoo-user] Wireless: deauthenticating by local choice

On Wed, Aug 31, 2011 at 12:30 PM, Grant emailgr...@gmail.com wrote: I'm on the road connecting to various wireless access points and sometimes I'm unable to connect and I get the (try 1) (try 2) (try 3) (timed out) messages in dmesg which makes sense.  Other times I get a different series of

Re: [gentoo-user] Wireless: deauthenticating by local choice

I'm on the road connecting to various wireless access points and sometimes I'm unable to connect and I get the (try 1) (try 2) (try 3) (timed out) messages in dmesg which makes sense.  Other times I get a different series of messages in dmesg when I'm unable to connect which don't make sense

Re: [gentoo-user] Wireless: deauthenticating by local choice

On Wed, Aug 31, 2011 at 2:11 PM, Grant emailgr...@gmail.com wrote: I'm on the road connecting to various wireless access points and sometimes I'm unable to connect and I get the (try 1) (try 2) (try 3) (timed out) messages in dmesg which makes sense.  Other times I get a different series of

Re: [gentoo-user] Wireless N PCMCIA/CardBus Recommendations...

- Original Message From: Paul Hartman paul.hartman+gen...@gmail.com To: gentoo-user@lists.gentoo.org Sent: Fri, July 15, 2011 5:24:48 PM Subject: Re: [gentoo-user] Wireless N PCMCIA/CardBus Recommendations... On Fri, Jul 15, 2011 at 2:54 PM, ny6...@gmail.com wrote: I have

Re: [gentoo-user] Wireless N PCMCIA/CardBus Recommendations...

On Mon, Jul 18, 2011 at 10:58:45AM -0700, BRM wrote: - Original Message From: Paul Hartman paul.hartman+gen...@gmail.com To: gentoo-user@lists.gentoo.org Sent: Fri, July 15, 2011 5:24:48 PM Subject: Re: [gentoo-user] Wireless N PCMCIA/CardBus Recommendations... On Fri, Jul

Re: [gentoo-user] Wireless N PCMCIA/CardBus Recommendations...

I have always had good luck with Atheros-based cards. HTH. Terry

Re: [gentoo-user] Wireless N PCMCIA/CardBus Recommendations...

On Fri, Jul 15, 2011 at 2:54 PM, ny6...@gmail.com wrote: I have always had good luck with Atheros-based cards. HTH. Me too. Plus, they are usually more likely to be able to do the fun stuff like master mode, monitor mode, packet injection...

Re: [gentoo-user] Wireless N PCMCIA/CardBus Recommendations...

On Thu, 14 Jul 2011 09:42:49 -0700 (PDT), BRM wrote: While I am at it, I am also considering getting a new wireless card for my D600 laptop to at least augment the internal b43-legacy supported Broadcom 43xx card that generally works, but is also a pain to keep working. [snip] So that

Re: [gentoo-user] Wireless N PCMCIA/CardBus Recommendations...

- Original Message From: Neil Bothwick n...@digimed.co.uk On Thu, 14 Jul 2011 09:42:49 -0700 (PDT), BRM wrote: While I am at it, I am also considering getting a new wireless card for my D600 laptop to at least augment the internal b43-legacy supported Broadcom 43xx card that

Re: [gentoo-user] Wireless Issue

On Wed, May 19, 2010 at 6:14 AM, CJoeB colleen.bea...@gmail.com wrote: Hi, I had wireless working just fine back when I was using the 2.6.27-gentoo-r8 kernel. Since upgrading to the 2.6.30 series of kernels, I haven't been able to get it working. I was using the ipw3945 driver, but this

Re: [gentoo-user] Wireless Issue

On Wed, May 19, 2010 at 07:14:35AM -0400, CJoeB wrote: Hi, I had wireless working just fine back when I was using the 2.6.27-gentoo-r8 kernel. Since upgrading to the 2.6.30 series of kernels, I haven't been able to get it working. I was using the ipw3945 driver, but this driver needs TKIP

Re: [gentoo-user] Wireless Issue

On 05/20/10 01:06, Zeerak Mustafa Waseem wrote: On Wed, May 19, 2010 at 07:14:35AM -0400, CJoeB wrote: Hi, I had wireless working just fine back when I was using the 2.6.27-gentoo-r8 kernel. Since upgrading to the 2.6.30 series of kernels, I haven't been able to get it working. I was

Re: [gentoo-user] Wireless Issue

Am Donnerstag, 25. März 2010 schrieb CJoeB: Hi, I have an Intel 3945 wireless adaptor in my laptop. I have always used the ipw3945 driver in gentoo because I have never had any luck with the iwl3945 driver. [...] Tonight I, again, following the wiki, tried building the iwl3945 driver

Re: [gentoo-user] Wireless Issue

On Thu, 2010-03-25 at 10:43 +0100, Frank Steinmetzger wrote: I don't know if it matters, but I am using wireless-extensions as opposed to wpa-supplicant because it doesn't seem that wpa-supplicant supports the Intel 3945 wireless adaptor. IWL3945 and wpa_supplicant are working just fine

Re: [gentoo-user] Wireless...

- Original Message From: BRM bm_witn...@yahoo.com From: Mike Edenfield On 12/2/2009 9:17 PM, BRM wrote: I have wireless working (b43legacy driver for the Dell Wireless Broadcom) through a static configuration in /etc/conf.d/net - basically: essid_wlan0=myWLAN

Re: [gentoo-user] Wireless...

On 12/2/2009 9:17 PM, BRM wrote: I have wireless working (b43legacy driver for the Dell Wireless Broadcom) through a static configuration in /etc/conf.d/net - basically: essid_wlan0=myWLAN key_MYWLAN=somekey config_MYWLAN=( dhcp ) preferred_APS= ( myWLAN ) I would like to use a tool like WPA

Re: [gentoo-user] Wireless...

- Original Message From: Mike Edenfield kut...@kutulu.org On 12/2/2009 9:17 PM, BRM wrote: I have wireless working (b43legacy driver for the Dell Wireless Broadcom) through a static configuration in /etc/conf.d/net - basically: essid_wlan0=myWLAN key_MYWLAN=somekey

Re: [gentoo-user] Wireless...

This is my etc/conf.d/net file: modules=( wpa_supplicant ) wpa_supplicant_wlan0=-Dwext preferred_aps=(ESSID1 ESSID2) essid_wlan0=any All specific stuff is in /wpa_supplicant/supplicant.conf Zeerak On Thu, 03 Dec 2009 03:17:15 +0100, BRM bm_witn...@yahoo.com wrote: I have wireless working

Re: [gentoo-user] Wireless...

KDE 4 doesn't have an official network manager yet. you can use net-misc/wicd, it works nice. On Thu, Dec 3, 2009 at 2:17 AM, BRM bm_witn...@yahoo.com wrote: I have wireless working (b43legacy driver for the Dell Wireless Broadcom) through a static configuration in /etc/conf.d/net - basically:

Re: [gentoo-user] wireless does not work on thinkpad t61

On Fri, 2009-09-11 at 20:20 +0800, Xi Shen wrote: my laptop is thinkpad t61, and wireless card is intel pro/wireless 3945abg (according to the lspci output). i have configured my kernel as instructed by the handbook, and after compiling and reboot, i can see my wlan interface by iwconfig -a,

Re: [gentoo-user] wireless does not work on thinkpad t61

i solved it. thanks ;) On Fri, Sep 11, 2009 at 8:42 PM, Albert Hopkins mar...@letterboxes.org wrote: On Fri, 2009-09-11 at 20:20 +0800, Xi Shen wrote: my laptop is thinkpad t61, and wireless card is intel pro/wireless 3945abg (according to the lspci output). i have configured my kernel as

Re: [gentoo-user] Wireless not working anymore

On 29 Jun 2009, at 20:44, Neil Bothwick wrote: On Mon, 29 Jun 2009 19:03:32 +0400, Vasya Volkov wrote: After read this thread I don't understand how to start net.wlan0 with firmware from slot (1) (using 2.6.30-gentoo-r1) instead of usage a script which manual configure device but this is not

Re: [gentoo-user] Wireless not working anymore

On Tue, 30 Jun 2009 09:24:10 +0100, Stroller wrote: After read this thread I don't understand how to start net.wlan0 with firmware from slot (1) (using 2.6.30-gentoo-r1) instead of usage a script which manual configure device but this is not the solution... emerge -C

Re: [gentoo-user] Wireless not working anymore

On Monday 29 June 2009 11:29:22 Marco wrote: Hi all, after some updating (emerge --sync and emerge --update --deep world, etc.) my wirelss card does not work anymore. In the boot messagesI have: [...] * Starting wlan0 SIOCSIFFLAGS: No such file or directory SIOCSIFFLAGS: No such file or

Re: [gentoo-user] Wireless not working anymore

В Пнд, 29/06/2009 в 11:30 +0200, Alan McKinnon пишет: On Monday 29 June 2009 11:29:22 Marco wrote: Hi all, after some updating (emerge --sync and emerge --update --deep world, etc.) my wirelss card does not work anymore. In the boot messagesI have: [...] * Starting wlan0

Re: [gentoo-user] Wireless not working anymore

On Mon, Jun 29, 2009 at 11:30 AM, Alan McKinnonalan.mckin...@gmail.com wrote: On Monday 29 June 2009 11:29:22 Marco wrote: Hi all, after some updating (emerge --sync and emerge --update --deep world, etc.) my wirelss card does not work anymore. In the boot messagesI have: [...]  *

Re: [gentoo-user] Wireless not working anymore

On Mon, 29 Jun 2009 11:29:22 +0200, Marco wrote: after some updating (emerge --sync and emerge --update --deep world, etc.) my wirelss card does not work anymore. What did you update? Telling us you updated wporld means nothing, it just tells us that one of the unknown packages you updated may

Re: [gentoo-user] Wireless not working anymore

On Mon, Jun 29, 2009 at 11:44 AM, Neil Bothwickn...@digimed.co.uk wrote: On Mon, 29 Jun 2009 11:29:22 +0200, Marco wrote: after some updating (emerge --sync and emerge --update --deep world, etc.) my wirelss card does not work anymore. What did you update? Telling us you updated wporld means

Re: [gentoo-user] Wireless not working anymore

On Mon, Jun 29, 2009 at 11:57 AM, Marcolistwo...@gmail.com wrote: On Mon, Jun 29, 2009 at 11:44 AM, Neil Bothwickn...@digimed.co.uk wrote: On Mon, 29 Jun 2009 11:29:22 +0200, Marco wrote: after some updating (emerge --sync and emerge --update --deep world, etc.) my wirelss card does not work

Re: [gentoo-user] Wireless not working anymore

On Mon, 29 Jun 2009 11:57:41 +0200, Marco wrote: What did you update? Telling us you updated wporld means nothing, it just tells us that one of the unknown packages you updated may have broken something. Use genlop or qlop to produce a list of the exact packages installed. I

Re: [gentoo-user] Wireless not working anymore

On 29 Jun 2009, at 10:39, Marco wrote: On Mon, Jun 29, 2009 at 11:30 AM, Alan McKinnonalan.mckin...@gmail.com wrote: On Monday 29 June 2009 11:29:22 Marco wrote: Hi all, after some updating (emerge --sync and emerge --update --deep world, etc.) my wirelss card does not work anymore. In

Re: [gentoo-user] Wireless not working anymore

On Mon, Jun 29, 2009 at 12:09 PM, Neil Bothwickn...@digimed.co.uk wrote: On Mon, 29 Jun 2009 11:57:41 +0200, Marco wrote: [...] It looks like you installed a new microcode package two days ago, that may be incompatible with your card. Have you tried rolling back to the previous version? I

Re: [gentoo-user] Wireless not working anymore

Am Mon, 29 Jun 2009 12:29:53 +0200 schrieb Marco listwo...@gmail.com: On Mon, Jun 29, 2009 at 12:09 PM, Neil Bothwickn...@digimed.co.uk wrote: On Mon, 29 Jun 2009 11:57:41 +0200, Marco wrote: [...] It looks like you installed a new microcode package two days ago, that may be

Re: [gentoo-user] Wireless not working anymore

After read this thread I don't understand how to start net.wlan0 with firmware from slot (1) (using 2.6.30-gentoo-r1) instead of usage a script which manual configure device but this is not the solution...

Re: [gentoo-user] Wireless not working anymore

Read this warning: * * Due to ucode API change this version of ucode works only with kernels * =2.6.29-rc1. If you have to use older kernels please install ucode * with older API: * emerge net-wireless/iwl3945-ucode:0 * For more information take a look at bugs.gentoo.org/246045 *

Re: [gentoo-user] Wireless not working anymore

2009/6/29 Fabio Palladino palladino.fa...@gmail.com Read this warning: * * Due to ucode API change this version of ucode works only with kernels * =2.6.29-rc1. If you have to use older kernels please install ucode * with older API: * emerge net-wireless/iwl3945-ucode:0 * For more

Re: [gentoo-user] Wireless not working anymore

В Пнд, 29/06/2009 в 14:15 -0300, Alejandro пишет: 2009/6/29 Fabio Palladino palladino.fa...@gmail.com Read this warning: * * Due to ucode API change this version of ucode works only with kernels * =2.6.29-rc1. If you have to use older

  1   2   3   >