Hi,
I think this will help you:
http://www.gentoo.org/doc/en/ebuild-submit.xml
You also might want to have a look to dev mailing list.
kh
Thomas Kahle wrote:
Hi all,
I've written an ebuild for a math-software called polymake
(www.math.tu-berlin.de/polymake).
You find it attached. You have
James Ausmus wrote:
On Jan 22, 2008 7:08 PM, James [EMAIL PROTECTED] wrote:
Hello,
I did a routine 'emerge sync' with no problems.
Then I did an ' emerge -uDNvp world' and it gives this
message:
snip
cache.cache_errors.CacheCorruption: sys-apps/baselayout-1.12.10-r5 is corrupt:
is installed.
2. One cannot use a current stage3 tarball. When chrooting this will
lead to a FATAL - Kernel to old
3. The 2006.0 tarball one can use to chroot is still using gcc 3.xxx.
This is resulting in heavy upgrading work
4. You are running in the small pam shadow problem.
Thanks
kh
--
gentoo
James wrote:
KH gentoo-user at konstantinhansen.de writes:
the current livecd-xbox-20050914.iso.bz2
The CD is outdated. This is leading to some
problems when installing gentoo on the xbox.
Here is a link you might find interesting:
http://www.gentoo.org/proj/en/releng
/
sparc64/ x86_64/
but not amd64?
kh
So, the only good reason to move to amd64 is when you buy a 64 bit
machine
I have 1G RAM and it's a laptop doesn't serve huge databases so I
guess despite if my CPU is 64 or 32 bits, I'll just stick with the 32
version, works great
James wrote:
Hello,
Current CFLAGS=-O2 -march=i686 -pipe
I want to add -fomit-frame-pointer to my
CFLAGS on an existing system that has been running
for months.
Is this safe or do I have to rebuild everything with
somelike emerge -e ?
Should it be avoided completely?
James
Hi,
Hi,
never tried that and might only be a temporary workaround. You could
install grub in the mbr of both disk and then point them only to your
internal disk. That way you should always be able to boot, shouldn't you?
kh
andrea wrote:
On gio, 2008-02-28 at 12:54 -0500, Don Jerman wrote
Gavin Seddon wrote:
Hi ctorrent produced the trilogy in mkv format, as far as I can tell
this needs modifying before I can burn. What's the best way todo this
pls?
GAVIN
What do you want to tell me with this. Torrent is a software for p2p.
When you choose to download an mkv file you will
Jamie Dobbs wrote:
I've been away from Gentoo for the last year or so and using Ubuntu
but find that I want to return to Gentoo simply because of the level
of customization that I can do with it.
However, I do have a few worries - why has there been no 2007.1
release (there was a 2006.1 from
it and it is supported 100%. Since you already got one, may as well.
Hope that helps.
Dale
:-) :-)
only thing I found out until now is that flash is not working. Maybe
this is fixed by now.
kh
--
gentoo-user@lists.gentoo.org mailing list
Neil Bothwick wrote:
On Tue, 11 Mar 2008 08:39:39 +0100, KH wrote:
only thing I found out until now is that flash is not working. Maybe
this is fixed by now.
Install nspluginwrapper and the vast majority of flash sites work.
cool. Never missed it but it's nice to have it. Thanx
the
(update)result from you when comparing:
emerge -DuavN world
emerge -aev world
emerge -DuavN --with-bdeps y world
To see if some package is needed by anything you might run equery
depends whatever package
KH
Michael Schmarck wrote:
Alan McKinnon [EMAIL PROTECTED] wrote:
On Tuesday 08
Maybe he does have multiple versions installed of those packages. What
is the output of for example:
emerge -avP gcc
?
KH
Alan McKinnon wrote:
On Tuesday 08 April 2008, Michael Schmarck wrote:
Neil Bothwick [EMAIL PROTECTED] wrote:
On Tue, 08 Apr 2008 12:39:11 +0200, Michael
Alan McKinnon schrieb:
On Wednesday 16 April 2008, Richard Marzan wrote:
I had a circular dep problem with mktemp and coreutils and emerge
-C'd coreutils. Now I can't do anything significant just cd. how can
i repair this?
Boot off a LiveCD somehow. Use one that has a fairly recent
USE=-ipv6 -ftp emerge -av mplayer
Net Warrior schrieb:
Hi there guys.
I've been reading the handbook about the FLAGS featrure usage, very
powerfull indeed, but, I just was wondering if there a way to define
some flags for a particular aplication and not in general.
Lets take a real case,
long time now for these reasons.
On Thursday 24 April 2008, KH wrote:
USE=-ipv6 -ftp emerge -av mplayer
--
gentoo-user@lists.gentoo.org mailing list
what you want before emerging.
This way you know your changes will remain the next time you run
emerge uD world or update mplayer on its own.
kashani
I am really sorry for all this confusion I caused.
kh
--
gentoo-user@lists.gentoo.org mailing list
lrwxrwxrwx 1 root root 25 Jun 25 12:48 /usr/include/scsilib/scg -
/usr/include/scsilib/usal
on my xterm there is red highlighting under the output.
What can I do to install cdrtools correctly to a working standard?
Will I be able to emerge kino again, without cdrkit?
Thanks for any help
kh
--
gentoo
Sebastian Günther schrieb:
* KH ([EMAIL PROTECTED]) [05.07.08 13:24]:
Hi,
after reading some emails from the list I have been trying to unmerge
cdrkit and to emerge cdrtools. I aslo hat to unmerge dvd+rw-tools and kino.
Anyway I am still not able to emerge cdrtools.
!!! Cannot write
-gpac -gstreamer -sox 0 kB
Total: 8 packages (8 new), Size of downloads: 3,040 kB
Would you like to merge these packages? [Yes/No]
kh
--
gentoo-user@lists.gentoo.org mailing list
/app-cdr/cdrtools
the link under license is leading to nowhere. On the project page I have
not been able to find a license, too (fast overview).
Where can I find the license?
KH
--
gentoo-user@lists.gentoo.org mailing list
Did you recompile enigmail after upgrading thunderbird?
kons
Daniel Mendler wrote:
Hi
The enigmail plugin isn't found any more in Thunderbird 2.0.0.9.
Thunderbird is compiled with crypt, Enigmail is installed. Does anyone
have the same problem?
Best regards,
Daniel
--
Hi,
some file systems are not able to handle files bigger than size X. Fat32
for example only handles 4GB. Win often uses Fat32. Maybe this is your
problem.
Kons
Renat Golubchyk wrote:
Hi!
On Sun, 13 Jan 2008 14:21:30 + Stroller
[EMAIL PROTECTED] wrote:
What I thought to do was to
the way to go?
Thanks,
Mike
Hi,
since I am using net-www/netscape-flash-10.0.21.1_alpha ~amd64 I did not
have the need to install mplayerplug-in anymore. I would try the
mplayerplug-in-3.55.
Have a look at xulrunner. It might be causing the downgread problem.
kh
.
Thanks for any help
kh
Daniel Pielmeier schrieb:
2009/1/19 KH gentoo-u...@konstantinhansen.de:
This link was great help for me. Told me everything and how to read the
blocker. So I did:
#emerge -avC qt-4.3.3
#emerge -DuavN world (This installed qt-4.4.2)
But now I do have a problem. When I run
#emerge
Nickolas Fortino schrieb:
On Tue, Jan 20, 2009 at 12:11 AM, KH gentoo-u...@konstantinhansen.de
mailto:gentoo-u...@konstantinhansen.de wrote:
Daniel Pielmeier schrieb:
2009/1/19 KH gentoo-u...@konstantinhansen.de
mailto:gentoo-u...@konstantinhansen.de:
This link
-linguas_en_GB
My example results in an only German oo.
This might be useless for you if you which to change the language every
5 mins, but it might be usable if you want to change for permanent.
kh
Nvidias nForce4
(A8NE-FM/S).
PEG-Grafikkarte von Leadtek mit Nvidia GeForce 6600
kh
Saphirus Sage schrieb:
You could look for the .config files from earlier kernels, unless
you've cleared out all your directories except the one with the
most-recent release.
On Jan 22, 2009, at 9:12 PM, Grant emailgr...@gmail.com wrote:
Well, I deleted my kernel .config. Is there any way
Dale schrieb:
Or just copy .config over to /boot yourself. I do that when I have a
stable kernel.
Dale
:-) :-)
+1
I even asked to add this to the gentoo kernel upgreat guide but devs
didn't like this idea.
kh
never tried to build my own live cd but maybe the following links
might help.
kh
http://www.gentoo-wiki.info/HOWTO_build_a_LiveCD_with_Catalyst
http://www.gentoo-wiki.info/HOWTO_build_a_LiveCD_with_Catalyst_for_newbies
?
Kernel version is in the prompt up there too.
Thanks.
Dale
:-) :-)
Hi,
you did run oldconfig
. Somewhere you said n where a number should be.
Search for:
External Firmware blobs to build into kernel binary (EXTRA_FIRMWARE)
kh
that are default and can't get rid of.
Dale
:-) :-)
Hi,
if you don't want to have this driver atall there should be nothing in
there. Best thing ist to run make menuconfig to search for the mentioned
line.
Sorry for my tiping but I am really sleepy :-)
kh
the '386' and the amd64/x86_64 architecture into x86.
And it happend a couple of kernel versions ago.
I am running amd64 using 2.6.27-gentoo-r8 and in arch there still is x86
an x86_64. Am I doing anything wrong or did I just missanderstand you?
kh
I am running amd64 using 2.6.27-gentoo-r8 and in arch there still is x86
an x86_64. Am I doing anything wrong or did I just missanderstand you?
kh
cd in there and look around. x86_64 only has a boot directory and when
you look at the bzImage file in it you find it's a link
, that is also why Fox has more viewers than CNN,
MSNBC and the rest combined.
Wait a moment - you imply that Fox doesn't treat his viewers stupid.
But: WTH do they hire guys like Geraldo Rivera ?
cu
Let's follow the idea of Mike Kazantsev and Dale and quit this discussion.
kh
Robert J. King schrieb:
It is done often. Writing this on an 24 Intel iMac running Gentoo w/ kde.
Just a few gotchas that I ran into:
1. The 2008.0 livecd's version of grub doesn't have the Mac partition patch.
Simple update of portage and then grub fixes this.
2. Nvidia binary
needed to remount partition 4 four times ...
Hope this helped a little.
kh
it here. I really miss something if there are
more than two month without this Those are the first singes that gentoo
is dead ... themes in this list or in the forum.
Keep smiling
kh
for help.
kh
,
with rss or use something like glsa-check -t all
kh
the subject line if
you wish?
Dale
:-) :-)
P. S. This has a lot of humor in it. Please laugh a LOT !!
I was just searching for this top posting message ... lol
And I also learnd a lot reading this post.
kh
!
Pleas try an name your mails. This maes it a lot easyer to support you
an to ind answers if somebody is searching for the same problem in the
futur.
Subect could be: /home - gnome-settings-daemon has crashed
kh
Volker Armin Hemmann schrieb:
On Wednesday 25 March 2009, KH wrote:
Pleas try an name your mails. This maes it a lot easyer to support you
an to ind answers if somebody is searching for the same problem in the
futur.
Subect could be: /home - gnome-settings-daemon has crashed
kh
might not be very long on earth any more. To get everybody
know about his problem, he is in the kernel, know.
kh
at: http://en.gentoo-wiki.com/wiki/Safe_Cflags#-march.3Dnative
I just changed this and did only follow up till emerge -eav system. Will
skip world unless I do run in trouble.
kh
to the mentioned problems my question is, do I have to configure
# gcc-config x86_64-pc-linux-gnu-4.3.2
... or ...
# gcc-config x86_64-pc-linux-gnu-4.3.2-r3
kind regards,
der Max
Hi
I would try to run gcc-config -l and than change acording to the list
you get. Than run -c again.
kh
zhen schrieb:
Hi,
5200 is also my card and I have recently tested it with latest nvidia
driver - it doesn't work with latest stable kernel 2.6.27-r8. I've had
to roll back to my old nv driver.
Best regards,
Evgeniy B.
Dale wrote:
Hi folks,
I'm trying to upgrade to the newer kernel,
Maximilian Bräutigam schrieb:
hi,
are you sure that you have configured your kernel correctly according to
the Gentoo Linux nVidia Guide?
http://www.gentoo.org/doc/en/nvidia-guide.xml
kind regards,
der Max
Am Mittwoch, den 01.04.2009, 05:34 -0500 schrieb Dale:
Maximilian Bräutigam
it is not going to remove something you
want to keep.
Dale
:-) :-)
hi,
you can also use --depclean -av so you want have to tip twice ;-)
kh
saying, that --prune is broken? I do use it sometimes. It is
also in the handbook (like here [1]). I always use it together with
--ask but never had any problems.
kh
[1] http://www.gentoo.org/doc/en/kernel-upgrade.xml#doc_chap9
are practically daily :)
Hi,
there is a weekly release!
http://gentoo.osuosl.org/releases/x86/autobuilds/
kh
with
updating problems, that maybe can disappoint them to continue with gentoo.
Agree. New drivers for new hardware also can be needed to be able to boot
after chrooting.
Hi,
I had been told the handbook shall be changed according so that people
will be able to use the new weekly releases.
kh
installation guid for knoppix which will work
with sysR as well. its not that hard to find!
kh
http://www.gentoo.org/doc/en/altinstall.xml
This one is a great feature! Years using Gentoo and this is the first
time i see something like this. for how Gentoo works this option is
more than usefull
Thnaks for the devs for this!
Cheers!
+1
kh
Hi,
I seem to have som problem here.
Emerging (3 of 107) app-arch/lzma-utils-4.32.7
* lzma-4.32.7.tar.gz RMD160 SHA1 SHA256 size ;-)
...
[ ok ]
* checking ebuild checksums ;-)
...
Justin schrieb:
GIve us the
/var/tmp/portage/app-arch/lzma-utils-4.32.7/work/lzma-4.32.7/config.log, then
we will tell
you more.
Hi,
thanks for your answer.
kh
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake
Justin schrieb:
KH schrieb:
Justin schrieb:
GIve us the
/var/tmp/portage/app-arch/lzma-utils-4.32.7/work/lzma-4.32.7/config.log,
then we will tell
you more.
Hi,
thanks for your answer.
kh
YOu have a typo in CFLAGS:
march==native
shame on me
Thanks
error???
kh
-moznopango -moznoroaming -postgres -xforms
kh
work like the should do. The point is, I don't want
them to work this way. I don't need a Reload button for firefox. I
want to use this button to fire up oO. How can I do this? ( I alrady
repainted my keyboard according to the functions I want the buttons to
have :-))
Thanks
kh
. The
only thing not working from there is executing /usr/bin/terminal
Thanks
kh
you emerge adobe-flash with
USE Flag -32bit ?
kh
KH schrieb:
=media-sound/rosegarden-1.7.3 ~x86
The first / you wrote is missing!
kh
Well sometimes I am just too slow ;-)
Alan was first!
/ you wrote is missing!
kh
that.
So answer to your question: I say it is expected behavior to run in
trouble when downgrading a large amount of programs. I wouldn't consider
this to be a bug.
kh
Stroller schrieb:
On 21 Apr 2009, at 08:17, KH wrote:
...
I did the same error once and I had been told that it can be unpleasing
to downgrade a large amount of programs. So back then I followed another
approach. I put every single packed which was on ~x86 in my keywords
file. Than I
it as fast as possible.
kh
://www.xk72.com/midpssh/index.php
kh
Daniel de Oliveira schrieb:
Where is the moderation?
2009/4/28 Martin Schrodi martin.schr...@retarus.de:
Ich werde ab 28.04.2009 nicht im Büro sein. Ich kehre zurück am
29.04.2009.
Ich werde Ihre Nachricht nach meiner Rückkehr beantworten.
Note: This is an automated response to your
Justin schrieb:
Ignore me!
be sure we won't!
Volker Armin Hemmann schrieb:
why all the panic and noise? just ignore the replies or you will create more
noise with your complaints then Martin with his little mistake.
+1
he is spammed with you're not subscribed to this list mlmmj
mails...
Nice! I toast you with a virtual beer.
Wouldn't that mean, that the server hosting the mailing list still is on
heavy duty? That still would evect the functionality of the server and
in the end of our list, wouldn't it?
kh
the phone.
On the other side: If the recipient is that important he should hire a
secretary or something like that.
Going to a place without internet or on vacation for weeks, ok it is
correct to inform the sender, that the email will not be read until
whenever.
kh
(in Germany) than email.
kh
://ftp.uni-erlangen.de/pub/mirrors/gentoo/experimental/x86/xbox/livecd/
Also the old ebuilds (not the sources) should be somewhere to find. I
read that they are kept.
I might also have a 2005 iso from an minimal cd left but I am not
absolutly sure about that.
kh
installation.
Anyway you also might want to run an emerge --depclean -av after
unmerging. Maybe there are othere programs not needed anymore at now.
kh
Hi,
I am searching for the opposite of emerge --noreplace atom. I forgot
-1 and now the package is part of the world file. It does not belong
there, it is a dependency I wanted to update. I don't want to run
--unmerge and -av1 again. What can I do?
kh
is the world
file? Is it in /var/db/pkg/ ?
kh
Alan McKinnon schrieb:
vi /var/lib/portage/world
followed by intelligent use of the / and dd functions in vi :-)
rofl
Andrew Gaydenko schrieb:
... or is it for me only?
http://downforeveryoneorjustme.com/packages.gentoo.org
;-)
-cddb -cdparanoia -debug -dirac -dvb (not hardware)
-pvr (it's software too, isn't it?)
-samba -schroedinger -xinerama (not hardware)
Is this a valid way of approache?
So My USE flags are set correct (for hardware) aren't they?
Some more output can be found below.
kh
These are the packages
KH schrieb:
Hi,
so I temporarily disable all USE flags in my make.conf by adding the #
to the line. Some with package.use.
The I run :
USE=cpudetection emerge -pv mplayer
Is this a valid way of approache?
From Stroller:
Apparently not!
I rebuilt using that flag received
the correct way. Was it:
USE_HARDWARE
USE_SOFTWARE
???
Does anyone now this out of the box?
Thak's
kh
Alan McKinnon schrieb:
On Wednesday 27 May 2009 00:52:21 KH wrote:
Hi,
so inspired by [gentoo-user] USE=mmx mmxext sse sse2 ssse3 3dnow
3dnowext I again thougt about my USE flags.
Now I want to put them in an order which is better fitting my need than
the alphabetical order. I remember I
Nikos Chantziaras schrieb:
KH wrote:
Hi,
so inspired by [gentoo-user] USE=mmx mmxext sse sse2 ssse3 3dnow
3dnowext I again thougt about my USE flags.
Now I want to put them in an order which is better fitting my need than
the alphabetical order. I remember I saw something ordering
always
lead to IIRC no persistent database errors, even on completely
insecure networks.
Maxim.
Hi Maxim,
I know there is a gentoo auto build cd but I don't know if it supports
your hardware as you need it. It might be worth a try.
http://gentoo.osuosl.org/releases/x86/autobuilds/
kh
)
looks like there have been changes in some way.
kh
://packages.larrythecow.org/?v=pkgc=x11-driverss=xf86-video-i740
http://packages.larrythecow.org/?v=pkgc=x11-driverss=xf86-video-intel
http://packages.larrythecow.org/?v=pkgc=x11-driverss=xf86-video-vermilion
kh
Johannes Geiss schrieb:
Hi there,
how can I list every installed package in Gentoo? The
file /var/lib/portage/world shows some installed packages, but how can I
see all other packages which have been installed automatically?
Thanks for any help
Johannes
emerge -pev world
of millions of times.
Well, that's the reason you should put /var on its own partition/logical
volume.
Bye...
Dirk
Well something creating that much messages is just buggi! The cpu will
be on havy duty no diffrence where /var is mounted. This is a bug which
should not happen.
kh
an opinion here, writing
something like: that's all you desision, gentoo is not taking your hand
for anything is not helpful at all.
We all know that our systems are fit to our personal needs. So every
system is different. But asking should leed to something like: consider
this, consider that ...
kh
Alan McKinnon schrieb:
On Wednesday 10 June 2009 23:24:50 KH wrote:
Alan McKinnon schrieb:
On Wednesday 10 June 2009 21:50:27 Alexander Pilipovsky wrote:
But how many space on hard disk for it will be good?
As much as you need.
There's only one person who can determine that. That person
Alexander Pilipovsky schrieb:
bn and KH, exuse me if I send not a good question, I have no many
experience yet :)
That's where all of us started on day ;-)
kh
situation x
around.
Also I learn a lot by following the way to the solution. Like give me
the formula and not the answer and next time I can search for everything
myself.
kh
splashimage problem. If so, see for grub emerge
make boot screen and others unreadable in this mailing list.
If not, I am sorry, don't know an answer.
KH
Hi,
I was wandering what is taking away my hdd space. Now I found:
du -h .config/audacious/config
160G.config/audacious/config
What is this file good for? I don't think a config file should be that
big. Can I delete it without trouble?
KH
Justin schrieb:
KH schrieb:
Hi,
I was wandering what is taking away my hdd space. Now I found:
du -h .config/audacious/config
160G.config/audacious/config
What is this file good for? I don't think a config file should be
that big. Can I delete it without trouble?
KH
What's writen
Justin schrieb:
just for ever. Could someone mail a normal config to replace mine?
KH
Thanks. It's OK now.
KH
1 - 100 of 241 matches
Mail list logo
