-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Norberto Bensa wrote:
| # mkdir /home/portage
| # mount --bind /home/portage /var/tmp/portage
Wow. What's wrong with PORTAGE_TMP_DIR=/home/portage in /etc/make.conf ;-)
Bye...
Dirk
- --
Dirk Heinrichs | Tel: +49 (0)151 1513 6954
Have you tried using the hex equivalent? eg. vga = 0x317 (=791).
VGA problem solved, the kernel framebuffer support was active, but
the standard SVGA card wasn't. I didn'teven know that framebuffer is
required for booting a Linux kernel in a different display resolution.
The kernel manual says
Matt Chorman wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 November 2003 12:38 pm, miks wrote:
Halo
i have a problem
i updated openssl form 0.9.6 = 0.9.7
unmerge it and remerge openssl-0.9.6? The current ebuild fails to build the
compatibility libraries. It is known
--- Oliver Lange [EMAIL PROTECTED]
However, after moving the file to somewhere else, the same thing
happened, that strange error msg, and something about failsafe
sessions. I have no clue how to launch such a 'failsafe session'
under gentoo / gnome / gdm, if there are any.
On the gdm
Andrew Farmer wrote:
On Sun, 09 Nov 2003 06:29:35 -0800, Norbert Kamenicky muttered:
- snip -
Well, the problem is that you can only mount an image as a user if the
image and mountpoint are specified in the fstab. I still don't know why
mount (or the kernel or something) can't start allowing
Hello everybody,
Is it normal that executables compiled with GCC 3 for Athlon-XP
are so much bigger than pre-compiled binaries from RPMs
(i compiled my binaries using -fomit-frame-pointer) ?
Ok, the RPMs are a bit older, but:
Example:
native compiled RPM binary
/bin/bash
On Mon, 10 Nov 2003 03:13:26 -0500 (EST), DB Wong wrote:
On the gdm greeter screen (the gdm login) there should be icons for Language,
Session, System, Quit. If you have these, click on the sessions icon and
choose the failsafe session.
Oh dear... i just found out that the login screen is
On Sun, 9 Nov 2003 21:07:41 -0700
Chad Leigh -- Shire.Net LLC [EMAIL PROTECTED] wrote:
On Nov 8, 2003, at 12:54 AM, Chad Leigh -- Shire.Net LLC wrote:
Hi All
I seem to have broken my emerge. Anything I try and emerge gets a
connection timeout and this happens on every host it
On Mon, 10 Nov 2003 02:21:42 +0100
Przemysaw Macig [EMAIL PROTECTED] wrote:
99% of Your emails consist the previous one(s). THIS IS JUNK!!
If everything what You want to say is in the 3-4 lines of new text, for
what do You need the rest?? It's unreadable for me!
Though my english isn't
anyone know if there is an Adobe SVG viewer for linux?
-dave
(I*NT*p)
Brevity is the soul of wit. - Shakespeare
--
[EMAIL PROTECTED] mailing list
On Sun, Nov 09, 2003 at 09:25:58PM -0600, Andrew Gaffney wrote:
Mark Knecht wrote:
for my dad. Alsa is installed and working fine, as is Mozilla, but there
are a lot of data types that aren't getting played by Plugger-4.0.
Fredrik's page says to check problems with Netscape first before
Hi!
I have a wierdness with my gentoo box which appeared recently after some
fs-whoes on my root partition.
The troubles with the ext3 fs are solved and usually I would have
expected gentoo to boot nicely again
but instead this happens at boot-up:
(please see the attached init-boot.log)
...
Sorry for the remedial question, but what package gives me the tools I need to
create a fat32 partition in linux?
Tom
--
[EMAIL PROTECTED] mailing list
While compiling kdemultimedia during emerge world, I get the following
error:
/usr/include/asm/byteorder.h:38: syntax error before '(' token
/usr/include/asm/byteorder h:42: '_u64' is used as a type, but is not
defined as a type.
/usr/include/asm/byteorder h;43: syntax error before '}' token
Le Lundi 10 Novembre 2003 10:55, Tom Eastman a écrit :
Sorry for the remedial question, but what package gives me the tools I need
to create a fat32 partition in linux?
use mkfs.vfat -F 32
and mkfs.vfat is in sys-fs/dosfstools
--
mathieu perrenoud
--
[EMAIL PROTECTED] mailing list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tom Eastman wrote:
| Sorry for the remedial question, but what package gives me the tools I
need to
| create a fat32 partition in linux?
Partition or filesystem? fdisk for the first, dosfstools for the latter.
HTH...
Dirk
- --
Dirk Heinrichs
On Mon, 10 Nov 2003 23:06, Dirk Heinrichs wrote:
Partition or filesystem? fdisk for the first, dosfstools for the latter.
dosfstools is the one I'm after... thanks!
--
[EMAIL PROTECTED] mailing list
G'day there One All again,
After getting oodles of assistance with my FreeBSD/fstab difficulties, I'm now
back with another problem. (Hmmm... I hope this isn't the start of a trend).
This time around I find that emerge is causing me grief. I've read man pages,
forums, et al,
On Sun, 9 Nov 2003 21:38:21 -0800
Bryce [EMAIL PROTECTED] wrote:
While we're talking about openssl 0.9.7 failures, abiword no longer
works after this upgrade as well. I've tried reemerging libgnome(
that's the error that happens while rebuilding abiword) and i get no
love.
You should
Hi,
sorry if this is a FAQ, but I could't find the answer in the documentation:
How can I determine the ebuild a file belongs to?
(In Debian for example this is done with dpgk -S /path/to/some/file)
For example somecommand /usr/bin/ftp should answer net-ftp/ftp ...
And another question: Is
On Mon, 10 Nov 2003 11:48:41 +0100 (MET)
[EMAIL PROTECTED] wrote:
How can I determine the ebuild a file belongs to?
(In Debian for example this is done with dpgk -S /path/to/some/file)
For example somecommand /usr/bin/ftp should answer net-ftp/ftp ...
emerge gentoolkit
qpkg -f /path/to/file
Stephen Liu wrote:
PC1-RH9 box
==
Recently I am testing Shorewall 1.4.7 on this box so that there are 2
firewalls, Shorewall and Iptables, running on the same box but without
conflict. I have configured Shorewall 1.4.7 including IP masquerading
leaving Iptables untouched as default
Hi all,
I am trying to get squid 2.5.4 running. After /etc/init.d/squid start it
complains
* Initializing cache directory: /var/cache/squid
/sbin/runscript.sh: line 528: 24506 Aborted (core dumped)
/usr/sbin/squid -z -F 2/dev/null
* Error initializing: /var/cache/squid
Greetings, Michael
--
* Initializing cache directory: /var/cache/squid
/sbin/runscript.sh: line 528: 24506 Aborted (core dumped)
/usr/sbin/squid -z -F 2/dev/null
* Error initializing: /var/cache/squid
Does /var/cache/squid exist on your machine? If so check the permissions
and make sure you're initializing as
Hi everyone,
On Mon, Nov 10, 2003 at 03:54:17AM +0100, Oliver Lange wrote:
Due to some reason i can no longer login (X);
the login manager says my session lasted no
longer than 10 seconds, talking about missing
logoff or system installation problem.
Login doesn't work either with root or
Hi folks,
I have a Gentoo box and a RH9 box. They can connect to X-server of
another box. Copy and Paste commands also work i.e. copying the content
of a document of RH9 and pasting to another document of Gentoo and vise
versa.
Is it possible to transfer documents between 2 boxes via SSH
Hi all,
I have two gentoo systems. One has Gaim for a long time and it has very
nice animated smilies and I just emerged gaim and gaim-smilies on the
other one. Both have the same latest version of both ebuilds. However
the first has animated smilies while the other has not. Any ideas? Is
this a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 10 November 2003 11:24, Stephen Liu wrote:
Hi folks,
I have a Gentoo box and a RH9 box. They can connect to X-server of
another box. Copy and Paste commands also work i.e. copying the content
of a document of RH9 and pasting to
Hi,
Is it possible to transfer documents between 2 boxes via SSH without
using Samba? If YES kindly advise how to make it. I have tried with
drag and drop action without result.
You can try * scp * which is usefull to copy things through SSH from one
box to another. It is installed with
Stephen Liu wrote:
Hi folks,
I have a Gentoo box and a RH9 box. They can connect to X-server of
another box. Copy and Paste commands also work i.e. copying the content
of a document of RH9 and pasting to another document of Gentoo and vise
versa.
Is it possible to transfer documents between
Paulo Jorge de Oliveira Cantante de Matos wrote:
Hi all,
I have two gentoo systems. One has Gaim for a long time and it has very
nice animated smilies and I just emerged gaim and gaim-smilies on the
other one. Both have the same latest version of both ebuilds. However
the first has animated
Does /var/cache/squid exist on your machine? If so check the permissions
and make sure you're initializing as root.
Ok, found the problem
squid -z
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'
Squid Cache (Version 2.5.STABLE4): Terminated abnormally.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Yes. You can use sftp, which cames with ssh, (sftp [EMAIL PROTECTED]) , konqueror
(sftp://user:[EMAIL PROTECTED]), kbear (select sftp in protocols), shfs (shfsmount
[EMAIL PROTECTED]/dir)...
El Lunes, 10 de Noviembre de 2003 12:24, Stephen Liu
Hi, i am new here so please excuse me if my questions are dumb (I have
looked around already).
During the gentoo installation process:
1. 'emerge gnome' mozilla1.4 failed with please use gtk+2
flag. So now gtk+2 is in /etc/make.conf. But most of gnome was already
compiled. How do I compile (all
howdie all
i built my machine a while ago , and didnt think i needed my paralel ports working but
now i want to use them .
I have lpt support into my kernel
but i still dont have a /dev/lp*
if i do a dmesg | grep parport
i get
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport1: PC-style
Hi!
i guess i'm a little late, but if your problem is:
Xlib: connection to localhost:11.0 refused by server
Xlib: Invalid MIT-MAGIC-COOKIE-1 key
konqueror: cannot connect to X server localhost:11.0
# kedit
Xlib: connection to localhost:11.0 refused by server
Xlib: Invalid MIT-MAGIC-COOKIE-1 key
On 11/10/03 Oliver Lange wrote:
Hello everybody,
Is it normal that executables compiled with GCC 3 for Athlon-XP
are so much bigger than pre-compiled binaries from RPMs
(i compiled my binaries using -fomit-frame-pointer) ?
Ok, the RPMs are a bit older, but:
Example:
Mick Wever wrote:
Hi, i am new here so please excuse me if my questions are dumb (I have
looked around already).
During the gentoo installation process:
1. 'emerge gnome' mozilla1.4 failed with please use gtk+2
flag. So now gtk+2 is in /etc/make.conf. But most of gnome was already
compiled. How do
Mick Wever wrote:
(It this neccessary? And will this use gtk+2 as the default gtk or is
gtk+2 a separate package in portage?)
My mistake in last post.. instead use:
emerge -pP gtk+
MAL
--
[EMAIL PROTECTED] mailing list
modprobe lp
BUild it as a module... Character Devices - Parallel Printer Support.
Best regards,
Paulo Matos
On Mon, 2003-11-10 at 11:51, Ryan wrote:
howdie all
i built my machine a while ago , and didnt think i needed my paralel ports working
but now i want to use them .
I have lpt
Is the non-animated one using GTK1 instead of GTK2?
Just an idea.
Unfortunately you're not right. Both were built with GTK2 flag enabled.
Any ideas?
Best regards,
Paulo Matos
MAL
--
[EMAIL PROTECTED] mailing list
--
Paulo J. Matos : [EMAIL PROTECTED]
Instituto Superior Tecnico
Maybe this could help
http://www.karkomaonline.com/article.php?story=20030908215509618
specially if come from rpm world.
On Sun, 2003-11-09 at 23:23, Thomas Smith wrote:
I'm new to Gentoo (switching from RH9) and have become used to RPMs and
their query tools.
I've been looking for a way to
--- Paulo Jorge de Oliveira Cantante de Matos [EMAIL PROTECTED] wrote:
modprobe lp
BUild it as a module... Character Devices - Parallel Printer Support.
On Mon, 2003-11-10 at 11:51, Ryan wrote:
i built my machine a while ago , and didnt think i needed my paralel ports
working but now
On Sun, 2003-11-09 at 23:14, Eamon Caddigan wrote:
I have only two masked packages installed, but they're causing me
trouble when updating world. I'm using Tcl and Tk 8.4.4, and the
following happens:
-- begin:
emerge -pvUD world
--upgradeonly implies --update... adding --update to
I also installed Xawtv 3.86-r1 (emerge -k xawtv) and it sucked in all
This version of XawTV do not play nicely with nvidia cards. I had a nvidia
card and got segfault too. Try upgrading to latest Xawtv
(ACCEPT_KEYWORDS=*~x86 emerge xawtv. Then it should not segfault, at least
mine didn't. But
On Mon, 2003-11-10 at 06:24, Paulo Jorge de Oliveira Cantante de Matos
wrote:
Hi all,
I have two gentoo systems. One has Gaim for a long time and it has very
nice animated smilies and I just emerged gaim and gaim-smilies on the
other one. Both have the same latest version of both ebuilds.
On Mon, 2003-11-10 at 03:28, Oliver Lange wrote:
Hello everybody,
Is it normal that executables compiled with GCC 3 for Athlon-XP
are so much bigger than pre-compiled binaries from RPMs
(i compiled my binaries using -fomit-frame-pointer) ?
This is sometimes a trade-off of compiling packages
I think mozilla/galeon can be built with svg support as well. Tried it
a few versions ago but didnt have many example to test it beyond a
couple of demo images.
BillK
On Mon, 2003-11-10 at 20:48, Azhdeen wrote:
On Monday 10 November 2003 10:35, dave willis wrote:
anyone know if there is an
Henti Smith wrote:
Matt Chorman wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 November 2003 12:38 pm, miks wrote:
Halo
i have a problem
i updated openssl form 0.9.6 = 0.9.7
unmerge it and remerge openssl-0.9.6? The current ebuild fails to
build the compatibility
Ciaran,
My wife has this skin care system to which she subscribes. She's a fanatic.
It comes with about 20 odd bottles of ointments, elixirs and various stuff.
She painstakingly mixes and applies. It takes her well over an hour a day.
For the record, that exorcise has very little to do with
brian connolly wrote:
Ciaran,
My wife has this skin care system to which she subscribes. She's a fanatic.
It comes with about 20 odd bottles of ointments, elixirs and various stuff.
She painstakingly mixes and applies. It takes her well over an hour a day.
For the record, that exorcise has very
gabor wrote:
Andrew Farmer wrote:
On Sun, 09 Nov 2003 06:29:35 -0800, Norbert Kamenicky muttered:
- snip -
Well, the problem is that you can only mount an image as a user if the
image and mountpoint are specified in the fstab. I still don't know
why
mount (or the kernel or something) can't
I am trying to install the slickbar theme for SuperKaramba and am running
into the problem of the CaptainPodd.ttf font not showing up. I have read
the docs on the gentoo site and have searched throught the forums only to be
confused. Could someone point me in the right direction. What I have
Tracy,
Are you getting any errors from xfs? That might help. I haven't
played around with that font, but I have had errors with other fonts and
the error log has helped me greatly.
George Nazarey
-Original Message-
From: Tracy LCpl Derek E [mailto:[EMAIL PROTECTED]
Sent:
Hello Gentooers,
(Hopefully I am providing enough info, but if not let me know)
I just atempted my first stage 3 gentoo install this weekend, and was partially
successful. I had windows and redhat dual booting, and I decided to give gentoo a try
so I went ahead and overwrote my redhat
Hall Stevenson [EMAIL PROTECTED] wrote:
On Sun, 2003-11-09 at 23:14, Eamon Caddigan wrote:
I have only two masked packages installed, but they're causing me
trouble when updating world. I'm using Tcl and Tk 8.4.4, and the
following happens:
-- begin:
emerge -pvUD world
--upgradeonly
David wrote:
Hello Gentooers,
(Hopefully I am providing enough info, but if not let me know)
I just atempted my first stage 3 gentoo install this weekend, and was partially successful. I had windows and redhat dual booting, and I decided to give gentoo a try so I went ahead and overwrote my
No I have not had any errors. When xfs everything is fine it indexes the
font dir but when I go into kde the font is not available as far as I can
tell.
-Original Message-
From: Nazarey, George [mailto:[EMAIL PROTECTED]
Sent: Monday, November 10, 2003 9:27 AM
To: [EMAIL PROTECTED]
Jeff,
I haven't heard of this problem before, anyway... Ant has a set of
optional tasks that are packaged in a separate jar file. Maybe the
gentoo ebuild got the incorrect version of them. As a workaround, you
may remove the optional jar, or try to emerge a prior version of the ebuild.
On Mon, 10 Nov 2003 15:27:26 +0100
Guy Van Sanden [EMAIL PROTECTED] wrote:
I'm trying to upgrade from Sim 0.9.0 to 0.9.1 (0.9.0 was broken on ICQ).
The ebuild fails on automake with the message below.
I tried to install automake 1.7.8 (emerge -u), but when emerging sim, it
re-installs 1.7.5.
Hi,
Here is my working configuration in grub.conf to boot XP :
title=Windows XP
rootnoverify (hd0,0)
makeactive
chainloader +1
Hope this helps.
Fabien
David a écrit :
Hello Gentooers,
(Hopefully I am providing enough info, but if not let me know)
I just atempted my first stage 3 gentoo
David wrote:
Hello Gentooers,
(Hopefully I am providing enough info, but if not let me know)
I just atempted my first stage 3 gentoo install this weekend, and was partially
successful. I had windows and redhat dual booting, and I decided to give gentoo a
try so I went ahead and
Hi,
I wish to enable X Forwarding via SSH. The remote box is Gentoo. It is
behind NAT with static NAT entry for port 22, so I can connect to this
boxx without any problems. I viewed the default values at
/etc/ssh/sshd_config and the seem to be OK. However, when I try to run any
program at my
Il Mon, 10 Nov 2003 03:58:58 -0600, Kathy Wills ha scritto:
While compiling kdemultimedia during emerge world, I get the following
error:
/usr/include/asm/byteorder.h:38: syntax error before '(' token
/usr/include/asm/byteorder h:42: '_u64' is used as a type, but is not
defined as a
Setting UMASK in the apache user environment?
Stefano Marinelli wrote:
Hi there. Apache by default creates files with permissions
rw-r--r-- apache dirgroup. I would like to give the write permission to
the group, but I'd like apache to do it automatically when creating
files. How could I set
Thomas Smith wrote:
I've been looking for a way to query the Portage database to determine
what's installed and get general info regarding the packages--I'm
looking for something similar to rpm -qa.
rpm -qa is qpkg -I -v in our world.Mind the capital I. Welcome
aboard. :)
--
[EMAIL
You can autoload the module on boot in the order you want them to be.
/etc/modules.autoload is a good start.
I have a wired and wireless nic on my laptop, I've noticed
the wireless
nic sometimes get eth0 and other times eth1.
Is there a way to assign a nic to be a choosen eth device?
--
Hi,
I wish to enable X Forwarding via SSH. The remote box is Gentoo. It is
behind NAT with static NAT entry for port 22, so I can connect to this
boxx without any problems. I viewed the default values at
/etc/ssh/sshd_config and the seem to be OK. However, when I try
to run any
program at
On Mon, 2003-11-10 at 09:47, Eamon Caddigan wrote:
Hall Stevenson [EMAIL PROTECTED] wrote:
On Sun, 2003-11-09 at 23:14, Eamon Caddigan wrote:
I have only two masked packages installed, but they're causing me
trouble when updating world. I'm using Tcl and Tk 8.4.4, and the
following
Leonid Podolny wrote:
Hi,
I wish to enable X Forwarding via SSH. The remote box is Gentoo. It is
behind NAT with static NAT entry for port 22, so I can connect to this
boxx without any problems. I viewed the default values at
/etc/ssh/sshd_config and the seem to be OK. However, when I try to
Why are these revisions so different? Is it significantly
more than a
numbering change?
Netscape 7.1 is nothing more than a repackaged Mozilla 1.2.
The whole story is a bit complicated, really. A quick summary, from
my (possibly faulty) memory:
Netscape 4.79 is the last of
Hello folks,
when I view http://www.gentoo.org/doc/en/ldap-howto.xml; with my
Konqueror 3.1.4, every Code listing on this page is shown up as
colored little rectangles.
This error concerns only special tags, like
span class=comment. Only class-tags... I am not a HTML
programmer. CSS-problem?
Mark Knecht wrote:
Why are these revisions so different? Is it significantly
more than a
numbering change?
Netscape 7.1 is nothing more than a repackaged Mozilla 1.2.
The whole story is a bit complicated, really. A quick summary, from
my (possibly faulty) memory:
Netscape 4.79 is the last
On Mon, 2003-11-10 at 10:08, Jeffrey Smelser wrote:
You can autoload the module on boot in the order you want them to be.
/etc/modules.autoload is a good start.
I have a wired and wireless nic on my laptop, I've noticed
the wireless
nic sometimes get eth0 and other times eth1.
Is
Anyway, this is what I'm trying to make work under Linux
right now. My
presumption is that this all works for someone... ;-)
You may want to upgrade plugger. The latest version in portage is 5.0.
--
Andrew Gaffney
Andrew,
OK, but it's ~x86 stuff. Are you using it? Is it
Hall Stevenson [EMAIL PROTECTED] wrote:
On Mon, 2003-11-10 at 09:47, Eamon Caddigan wrote:
Hall Stevenson [EMAIL PROTECTED] wrote:
Yeah, I realize I wasn't very clear: Tcl and Tk are the only masked
packages on my system. Trying:
ACCEPT_KEYWORDS=~x86 emerge -pvu tcl tk
Indicates that I
Jeffrey Smelser [EMAIL PROTECTED] wrote:
You can autoload the module on boot in the order you want them to be.
/etc/modules.autoload is a good start.
Out of curiosity, what's the difference between /etc/modules.autoload
and /etc/modules.autoload.d/kernel-2.X? It would make sense if you put
..or emerge epm epm -qa
Not that different
;=})
2003-11-10 16.07 skrev Leonid Podolny:
::Thomas Smith wrote:
::
::
::
:: I've been looking for a way to query the Portage database to determine
:: what's installed and get general info regarding the packages--I'm
:: looking for something
Adobe SVG! SVG is a W3C standard. Anyway, I believe mozilla will view SVG.
I'm not sure which version supports or if you will need a plugin. You will
have to check out mozilla.org. Or await a more knowledgable person to
reply.
-Original Message-
From: dave willis [mailto:[EMAIL PROTECTED]
H Roberto,
Thanks for your advice.
meaning that you can ping and ssh-login correctly from any box to any,
this should solve it:
on the X-serving host:
#xhost + 192.168.0.?
being the remote host IP
and also
# echo '192.168.0.?:0.0' $DISPLAY
being the X-serving host
I will try your
On Mon, 10 Nov 2003 06:16:18 -0800, Norbert Kamenicky muttered:
gabor wrote:
Andrew Farmer wrote:
On Sun, 09 Nov 2003 06:29:35 -0800, Norbert Kamenicky muttered:
- snip -
Well, the problem is that you can only mount an image as a user if the
image and mountpoint are specified in the
On Mon, 2003-11-10 at 13:49, Hall Stevenson wrote:
On Mon, 2003-11-10 at 06:24, Paulo Jorge de Oliveira Cantante de Matos
wrote:
Hi all,
I have two gentoo systems. One has Gaim for a long time and it has very
nice animated smilies and I just emerged gaim and gaim-smilies on the
other
H Mike, MAL, Alberto and others
scp remote:file localfile # user will be the user being used
scp [EMAIL PROTECTED]:file [EMAIL PROTECTED]:file
scp is part of openssh.
# epm -q scp/sftp
could not find them on Gentoo box
# emerge search sftp
found
dev-perl/net-sftp
gnome-extra/gnome-vfs-sftp
As such, is there a gentoo version for dummies? Are there any plans for a
more automated install script?
glis.sf.net
I've been testing it for a while now and the current implementation
seems stable if not feature rich.
=C=
* Cal Evans
* http://www.eicc.com
* We take care of your IT,
* So you
On Mon, 2003-11-10 at 10:48, Eamon Caddigan wrote:
Jeffrey Smelser [EMAIL PROTECTED] wrote:
You can autoload the module on boot in the order you want them to be.
/etc/modules.autoload is a good start.
Out of curiosity, what's the difference between /etc/modules.autoload
and
On Mon, 10 Nov 2003 08:19:40 -0800, Stephen Liu muttered:
H Mike, MAL, Alberto and others
scp remote:file localfile # user will be the user being used
scp [EMAIL PROTECTED]:file [EMAIL PROTECTED]:file
scp is part of openssh.
# epm -q scp/sftp
could not find them on Gentoo box
#
On Mon, 2003-11-10 at 11:19, Stephen Liu wrote:
H Mike, MAL, Alberto and others
scp remote:file localfile # user will be the user being used
scp [EMAIL PROTECTED]:file [EMAIL PROTECTED]:file
scp is part of openssh.
# epm -q scp/sftp
could not find them on Gentoo box
# emerge search
On Mon, 2003-11-10 at 11:11, Paulo Jorge de Oliveira Cantante de Matos
wrote:
On Mon, 2003-11-10 at 13:49, Hall Stevenson wrote:
On Mon, 2003-11-10 at 06:24, Paulo Jorge de Oliveira Cantante de Matos
wrote:
Hi all,
I have two gentoo systems. One has Gaim for a long time and it has
Stephen Liu wrote:
H Mike, MAL, Alberto and others
scp remote:file localfile # user will be the user being used
scp [EMAIL PROTECTED]:file [EMAIL PROTECTED]:file
scp is part of openssh.
# epm -q scp/sftp
could not find them on Gentoo box
# emerge search sftp
found
dev-perl/net-sftp
On Monday 10 Nov 2003 14:48, Tracy LCpl Derek E wrote:
No I have not had any errors. When xfs everything is fine it indexes
the font dir but when I go into kde the font is not available as far
as I can tell.
KDE Control Centre - System Administration - Font Installer
Peter
--
Azhdeen wrote:
On Monday 10 November 2003 10:35, dave willis wrote:
anyone know if there is an Adobe SVG viewer for linux?
I know Adobe themselves make one, but i haven't tried it in a long time.
i know you didn't try emerge -s svg :
* net-www/adobesvg
Latest version available:
On Nov 10, 2003, at 2:16 AM, Andrej Kacian wrote:
\bash-2.05b# wget -d http://www.shire.net
DEBUG output created by Wget 1.8.2 on linux-gnu.
--21:01:49-- http://www.shire.net/
= `index.html'
Resolving www.shire.net... done.
Caching www.shire.net = 206.71.64.139
Connecting to
Of course he could have also just piped tar though ssh too... into a tar
on the opposite side. This works fine to move a few files too.
You could do it with a bunch of things, actually -- ssh connections make
nice machine-to-machine pipes.
Nate
Hall Stevenson wrote:
On Mon, 2003-11-10 at
From time to time I get the following message when emerging a package.
What does it mean, and what sort of action should I take to correct it?
Auto-cleaning packages ...
!!! Invalid db entry: /var/db/pkg/*sys-fs/devfsd!!! Invalid db entry:
/var/db/pkg/*sys-fs/devfsd
--
Lindsay Haisley
Hello all,
I am trying to install squidguard. It stops compiling with:
---snip---
config.status: creating src/config.h
making all in squidGuard-1.2.0
make[1]: Entering directory
`/var/tmp/portage/squidguard-1.2.0-r1/work/squidGuard-1.2.0/src'
making all in src
gcc -I.. -I. -I.
On Mon, 2003-11-10 at 12:00, Lindsay Haisley wrote:
From time to time I get the following message when emerging a package.
What does it mean, and what sort of action should I take to correct it?
Auto-cleaning packages ...
!!! Invalid db entry: /var/db/pkg/*sys-fs/devfsd!!! Invalid db
Paul Kimberley wrote:
I'm looking to obtain an ebuild for media-video/ffmpeg-0.4.6 , I
upgraded mine to 0.4.8 by accident and now the ebuild is out of the
portage tree and I can't find it on any of the servers.
Does anyone know how I can find old copies of old ebuild's?
-Thanks
p.s the reason is
On 2003.11.10 09:24, Tracy LCpl Derek E wrote:
I am trying to install the slickbar theme for SuperKaramba and am
running
into the problem of the CaptainPodd.ttf font not showing up. I have
read
the docs on the gentoo site and have searched throught the forums
only
to be
confused. Could someone
Andrew Farmer wrote:
On Mon, 10 Nov 2003 06:16:18 -0800, Norbert Kamenicky muttered:
gabor wrote:
Andrew Farmer wrote:
On Sun, 09 Nov 2003 06:29:35 -0800, Norbert Kamenicky muttered:
- snip -
Well, the problem is that you can only mount an image as a user if
Hello all,
I'm (unsuccessfully) trying to use qingy, a framebuffer application.
My video card is a S3 Savage8 GFX integrated in KN266 chipset.
It appears with lsmod as:
VGA compatible controller: S8 Inc. VT8751 [ProsavageDDR P4M266] VGA
controller
Is this not an accelerator? If so, how come I
1 - 100 of 215 matches
Mail list logo
