Fromn 2.4 s390/s390x doesn't implement the xattr syscalls yet.
p.s. any chance s390 will at least be in a compilable shape when
2.4.21 is release?
--- 1.14/arch/s390/kernel/entry.S Tue Jul 30 13:27:40 2002
+++ edited/arch/s390/kernel/entry.S Wed Feb 12 13:13:37 2003
@@ -558,18 +558,18
The command to vary offline is
echo set device range=[-] off /proc/dasd/devices
The results are a little misleading, in that the unit still shows up when
you cat /proc/dasd/devices, but with a status of unknown. Also, if you do
another add device for the same device number, you
So you can add the devices dynamically, but how do you then make them go
away,
set device range=range off echo'd to /proc/dasd/devices
There's a real handy script, dasd, described in the Large Scale Deployment
redbook:
#!/bin/sh
# dasd - simple utility for dynamic DASD management
if [ $1 = add
How did you install Apache? From an RPM? What distribution are you
running?
Mark Post
-Original Message-
From: Noll, Ralph [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 12, 2003 12:15 PM
To: [EMAIL PROTECTED]
Subject: starting programs at ipl
how do i go about starting
Greetings;
I just cloned my debian penguin, changed the ip-addresses and
host names and booted the clone. Neither my ctc0 link or the
eth0 link came up.
After much cursing and gnashing of teeth and scratching
of head I had a hunch and changed the physical addresses of
the links to be the same as
Dennis,
Since your running under VM can't you leave the virtual addresses in Linux the same in
all images and let VM take care of the physical side? In other words just attach
different physical addresses to the same virtual address across all you Linux images
in the profile exec?
Just a
Dennis,
Try looking at /etc/modutils/*.chandev, but I'm not sure those are the files
that you should be editing. I'm not yet familiar enough with Debian to
advise you on that, but I believe these are the source files that wind up
building /etc/chandev.conf.
Bill's right, though. There's really
Look in /etc/rc.d and/or /etc/init.d or /etc/rc.d/init.d (depending on what
distribution). These are the scripts used to start and stop things (normally).
Then look in /etc/rc.d/rc3.d (or 5.d or 4.d look in /etc/inittab to see what
runlevel you normally come up to). You'll find a bunch of
Interesting. Thanx.
-- Bhaskar
On Wednesday, February 12, 2003 at 08:54:49 (GMT+0100), Phil Payne wrote:
Not /390, but interesting:
http://www.theinquirer.net/?article=7735
--
Phil Payne
http://www.isham-research.com
+44 7785 302 803
+49 173 6242039
Greetings;
Good point, but all the directory entries and profile execs for
a dozen or so penguins are already set up, from way back when the
Marist distrib was the hot thing here. And, there was a pattern
then.
So, although there may not be a reason for the virtual addresses
to be different,
The article is negative about the iTanium, but my colleagues in high
performance computing tell me that this is a *very* capable cpu which is
going head to head with the Power4.
--henry schaffer
On Wed, Feb 12, 2003 at 12:04:12PM -0600, Dennis Wicks wrote:
My query is, where are these addresses hidden so I can change them in my
next clone? Or, alternatively, how can I make linux re-sense and
re-configure at boot time so I don't have to mess with it? It appears to
do this for dasd.
What's the equivalent to the chkconfig (under RedHat) on SuSe?
__
Lemarr T. Ketchens
Technical Services
MVS Systems Programmer
[EMAIL PROTECTED]
--- Legal Disclaimer: The information contained in this communication may be
confidential, is intended only for the use of
I just started defining my Linux Lpar on our MP3000-H50. I went to the Add Operating
System Configuration panel, and discovered the only two operating systems I can choose
are MVS and VM. What do I choose? Does it make a difference? Or, do I need updates
for HCD? I hope to install the new
Hmm. I'd say it's more a case of IBM focusing development dollars where
there aren't likely to be investments from other sources than anything
really negative about Itanium. HP and Intel care a lot more about
Itanium than IBM does (IBM has Itanium machines, but they are a me too
development more
Hi,
You do not need an OS Config for Linux. You only need to change IOCP/IOCDS
as/if needed. The parmline file lists useable devices.
Jean-Pierre Baril
Specialiste en technologies de l'information/IT Specialist
Novipro Inc / 2055, rue Peel, bureau 701
Montreal (Quebec) H3A 1V4
Tel: (514)
Eric,
If you're running Linux in an LPAR (w/o VM) you do not need to add OS def
in HCD (or OSCR).
SG
Eric Bielefeld
EBIETo: [EMAIL PROTECTED]
@phmining.com cc:
Sent by:
So then I only need to add a partition in HCD. I assume I have to add the chpids to
the partition name, and the devices I want to use. I want to make available 16 3390-3
volumes.
Eric
[EMAIL PROTECTED] 02/12/03 03:23PM
Hi,
You do not need an OS Config for Linux. You only need to change
When you say Linux LPAR, do you also mean an IFL?
Craig
- Original Message -
From: Eric Bielefeld [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, February 12, 2003 4:54 PM
Subject: Re: HCD Definition for Linux
So then I only need to add a partition in HCD. I assume I have to
Thanks for all the assistance. I have it figured out
now and I might even try making a script to automate the
process a little. Everything I do with linux turns out
to be a big learning exercise!
Again, Thanks!
Dennis
No. We don't have an IFL engine.
[EMAIL PROTECTED] 02/12/03 04:11PM
When you say Linux LPAR, do you also mean an IFL?
Craig
- Original Message -
From: Eric Bielefeld [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, February 12, 2003 4:54 PM
Subject: Re: HCD Definition for
The article is negative about the iTanium, but my colleagues in high
performance computing tell me that this is a *very* capable cpu which is
going head to head with the Power4.
I think Intel has stumbled:
http://www.theregister.co.uk/content/61/28894.html
POWER4 is clearly better positioned
Hello again from Gregg C Levine
You are right Dennis. I keep discovering that, every time I boot a
system here. (Intel) Have you had a chance to try out the Debian set,
that you were referring to in your earlier posts, under Hercules, on
an Intel setup? From what I've seen its wearing the devfs
http://www.eweek.com/article2/0,3959,886729,00.asp
--
Phil Payne
http://www.isham-research.com
+44 7785 302 803
+49 173 6242039
http://micro.magnet.fsu.edu/creatures/pages/linuxpenguin.html
--
Phil Payne
http://www.isham-research.com
+44 7785 302 803
+49 173 6242039
On Tue, 2003-02-11 at 20:40, Peter J. Farley III wrote:
Just out of curiosity, what *was* the thread you were looking for and
found?
It was http://www2.marist.edu/htbin/wlvtype?LINUX-VM.33367. It did
provide some helpful information for is. It gave us enough insight to
connect c3270 as a
What's new in release 2.17.1
Release date: 12 February 2003
* Corrected RPM installed files permissions (John Summerfield)
* Corrected dasdload verbosity level (Jay Maynard)
* Corrected card reader eof/intrq option handling, added * to
designate no file loaded (Jay
Lemarr T. Ketchens wrote:
What's the equivalent to the chkconfig (under RedHat) on SuSe?
Lemarr, try the insserv command.
Ronald van der Laan
28 matches
Mail list logo
