\
=p4340
GMRS Inc
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@...] On Behalf Of tracomm
Sent: Monday, April 12, 2010 10:33 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Zetron Controller Connector-Source
Any one have a source for the Zetron interface
tks, eric, but i was just confirming the correct description of the pin. i am
very familiar with z38max . i have 15 in actual use!!
73
jose
--- On Tue, 4/13/10, Eric Vincent eric...@telus.net wrote:
From: Eric Vincent eric...@telus.net
Subject: RE: [Repeater-Builder] Zetron Controller
Any one have a source for the Zetron interface connector (orange 15 pin)
used on most versions, 38, 38A, 38 Max ??
GMRSINC
: [Repeater-Builder] Zetron Controller Connector-Source
Any one have a source for the Zetron interface connector (orange 15 pin)
used on most versions, 38, 38A, 38 Max ??
GMRSINC
AM
Subject: RE: [Repeater-Builder] Zetron Controller Connector-Source
Hello,
How many pin is that connector, I think I have some of these in the inventory.
73' Eric VE7YBC
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yaoogroups.com] On Behalf Of tracomm
Subject: Re: [Repeater-Builder] Zetron Controller Connector-Source
Would that be 8 on bottom row, 7 on top row? Orange 15 pin connector? I can
check as well.
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: Eric Vincent
They are made by Phoenix Contacts. you can get them from Mouser.
Bill
KB1MGH
From: tracomm trac...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Mon, April 12, 2010 12:32:48 PM
Subject: [Repeater-Builder] Zetron Controller Connector-Source
Any one have
Z38 is 15 pin (orange) in straight line
From: La Rue Communications laruec...@gmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Mon, April 12, 2010 11:51:21 AM
Subject: Re: [Repeater-Builder] Zetron Controller Connector-Source
Would that be 8
[mailto:repeater-buil...@yahoogroups.com] De la part de Jose Aguilar
Envoyé : 12 avril 2010 13:29
À : Repeater-Builder@yahoogroups.com
Objet : Re: [Repeater-Builder] Zetron Controller Connector-Source
Z38 is 15 pin (orange) in straight line
_
From: La Rue Communications
Hi
well i wonder if someone here in the group have ever connected an Zetron
30 over the back panel with screews of the Master 2 ?
if you done it,would you have some pictures?
and where the cable,on wich screews it is connectedé
thanks for your help
73/s
gervais ve2ckn
i have a zetron 48b controller , running 2 motorola vhf sm50 mobiles via the
acdcessory connectors.
im having a problem with running a dpl. when i set the controller to dpl, it
will key up with no audio , but if i add audio the ctcss light drops and the
repeater drops.any ideas?i
Check and see if the DPL is either being presented or programmed as
inverted. My TP-38 panel is opposite of what I tell it to do, even
though PL's always work.
On 1/29/2010 3:56 PM, plaimann wrote:
i have a zetron 48b controller , running 2 motorola vhf sm50 mobiles
via the acdcessory
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Zetron Model 19 needed
I'm in need of a Zetron Model 19 Simplexor store and forward for VOICE.
Please email direct with price and shipping. Thanks!
I'm in need of a Zetron Model 19 Simplexor store and forward for VOICE. Please
email direct with price and shipping. Thanks!
who ever posted a wtb for zetron model 19
contact me i found one.
Ted Bleiman K9MDM
MDM Radio If its in stock...we've got it!
P O Box 31353 - Chicago ,IL 60631-0353
Phone 773. 255. 9838 fax 773.775.8096
see our offerings on
www.twowayshopper.com
www.secondhandradio.com
Hello all.
I am looking for a manual. I have a Zetron Model 20RD Message Repeater.
Anyone have a manual? Will pay for shipping and cost to copy.
Thanks!
-Jason
Zetron Gurus:
Does anyone out there know if the difference between a Model 38 and a Model 38A
is software only, or was there a hardware change (beyond EPROM, RAM -- stuff
involving the software) also?
73 DE N0MJS
--
Cort Buffington
H: +1-785-838-3034
M: +1-785-865-7206
Folks,
Got this Zetron 48 at a hamfestnow, I need to unlock it...can you do it
over the air like a 38A? I have the book but it is not clear at allNeed
info on how to program this beastHappy Thanksgiving.
Ron
a user unkeys is
that it allows in-band links with no ping-pong effects due to the
tails talking to each other.
73 - Jim W5ZIT
--- On Wed, 11/18/09, Eric Lemmon wb6...@verizon.net wrote:
From: Eric Lemmon wb6...@verizon.net
Subject: RE: [Repeater-Builder] Zetron 38A not sending reverse
burst
other.
73 - Jim W5ZIT
--- On Wed, 11/18/09, Eric Lemmon wb6...@verizon.net wrote:
From: Eric Lemmon wb6...@verizon.net
Subject: RE: [Repeater-Builder] Zetron 38A not sending reverse burst
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, November 18, 2009, 1:09 PM
I am trying to get a repeater going using a 38A and find that it doesn't send
reverse burst. I thought I saw that it did in the manual but upon looking
again, all I see is where it responds to reverse burst. Does anyone know for
sure if it is supposed to send reverse burst? If so, how do I get
@yahoogroups.com
Subject: [Repeater-Builder] Zetron 38A not sending reverse burst
I am trying to get a repeater going using a 38A and find that it doesn't
send reverse burst. I thought I saw that it did in the manual but upon
looking again, all I see is where it responds to reverse burst. Does anyone
For Sale:
Zetron Model 45B Z-Patch Telephone Interconnect and
Model 64 DAPT-Plus Dial Access Paging Terminal
Both of these units were in operation when removed from service. I really have
no application for this equipment and will take reasonable offers.
Spec information is available by
Anybody have a manual for a Zetron 45, not a 45B, a 45 ?
Mike WA6ILQ
I got one from the Pager equipment Junk.
Any use for this in a amateur repeater site?
Can we convert it into a Rpt controller for VHF?
Peter
paging. It then
sends a digital square wave.
WB5OXQ
- Original Message -
From: Peter P J
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 08, 2009 10:45 PM
Subject: [Repeater-Builder] Zetron Model 66
I got one from the Pager equipment Junk.
Any use
hi all, i need help with the zetron z-patch model 45b...the interconnect and
user manual pdf and if anybody have pc software will be good to have also. i
have software for radio programming and will trade if interested...thanks!
Can anybody tell me if Zetron still supports the Model 45B Z-PATCH or the Model
38A repeater Panel? I need some/all the chips for them. Or at least the ones
that are not available from mouser.
Thanks,
Jordan
Hi group,
I am trying to put a repeater here for our club, with a phone patch.
We do have a Zetron Model 30 Worldpatch but we can't find a user manual so we
are unable to install and programm it.
Did anyone have a scanned copy of the manual?
Thank you very much!
Adrian
yo3hjv
Do any of you LMR folks have schematics and/or module pinouts for the M4010
dispatch console?
Specifically, I have an ANI decoder board, #702-9583, from one of these
consoles
and I need the pinout (and, preferably, schematic) for it so I can try to
modify
it as a stand-alone MDC decoder.
Anyone have a pdf for a Zetron Model 35 - unit
i need book to set up
and program.
for a 6mtr repeater in the uk gb3ct thanks from chris
At 03:15 PM 03/12/09, you wrote:
Anyone have a pdf for a Zetron Model 35 - unit
i need book to set up
and program.
for a 6mtr repeater in the uk gb3ct thanks from chris
The brochure and the owners manual are on the repeater-builder web site.
We are still looking for the service manual.
Mike
Hello All
I have in my possession a Zetron 45B user manual PDF I would
like to see posted on the repeater builder web site to whom would I send it
Thanks
Ed Flipsen
Manager
OnionLake Network Services
edw...@onionlake.ca
306 344 5283
I have a Zetron simulcast delay unit. The sticker on it says model #
Simulcast Delay Unit. In doing some web searches, I think it might be the
same as a Zetron model 62, although it doesn't bear that model number
anywhere on it. It's a half-rack unit wide, 1 RU high. Can't find anything
Good afternoon
I am looking for the users manual/service manual for
the Zetron 45B interconnect . Anyone have one they wish to sell or lead me
to a source to get one. I inherited a site that has one but no documentation
was found with it
Happy new year to all on the group!
Recently my organisation inherited a large amount of model 49 LTR controllers
and the associated Model 2540 FASTnet Switch.
I am hoping that some kind individual has a copy of any relevant technical
information/manuals or software that they could supply me as
We have some surplus Zetron Model 49 Trunking controllers for sale, These are
in As New condition as were set up and then put into storage as service
spares that were never utilised.
Model: 901-9147
Quantity: 7
Looking at $USD 600 each + Shipping
Regards
Gareth Bennett
(Technical
Talked to Zetron this week and here is the factory version of correct
cable, I noted on the 48B manual in file section had a hand written
Null cable written in, this will only work on receiving data and not
talking to zetron controller.
PC RS232
2 3
3 4
5 5
Having a hard time understanding how to program these, I would like to
be able to read the 45 and put that info in the 48b, I know the
software is different, so will have to retype the settings.
All I would like to do is use the 45 or 48 as a two or three tone
encoder, decoder. Not using the
Hi Alex,
You can download the manual on the repeater builder site:
http://www.repeater-builder.com/zetron/zetron-index.html
Look on the manual you will have many possibility for resetting the machine.
Everything you need is there!
Good Luck.
Eric VE2VXT
_
De :
Hi Ian,
Does anyone have any info on the unit in question that generated those
tones? I'd love to find one - just for memorabilia.
That tone format has been around for a long time in mobile radio (Motorola
Quik-Call I) and is still being used in aviation (ICAO SELCAL) to page
aircraft on
-
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, October 11, 2008 6:37 PM
Subject: Re: [Repeater-Builder] Zetron SCU controller
Hi Ian,
Does anyone have any info on the unit in question that generated those
tones? I'd love to find one - just
Yet is should. It's no different than DTMF.
Chuck
WB2EDV
- Original Message -
From: Milt
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, October 11, 2008 7:29 PM
Subject: Re: [Repeater-Builder] Zetron SCU controller
Lots of equipment can encode the 2+2 Quick Call
Hi fellows. This is a little off topic, but lately I have been watching
and taping the old EMERGENCY! shows on WRTN Buffalo on DISH Network.
4PM eastern.
From reading on some fan sites, the dispatcher, Sam Lanier, who was a
real LA County fire dispatcher, used a ZETRON Station control unit to
On Fri, 10 Oct 2008 15:52:34 -, Ian Miller wrote:
shows on WRTN Buffalo on DISH Network.
VA2IR
I'm SURE you meant Expressvu or Starchoiceright :)
Tedd Doda, VE3TJD
Lazer Audio and Electronics
ESSO plaza at exit 268 off HWY 401
Phone: 519-513-0377
My idea of a Symphony
8 Pistons
@yahoogroups.com
Sent: Friday, October 10, 2008 11:52 AM
Subject: [Repeater-Builder] Zetron SCU controller
Hi fellows. This is a little off topic, but lately I have been watching
and taping the old EMERGENCY! shows on WRTN Buffalo on DISH Network.
4PM eastern.
From reading on some fan sites
I have a Zetron ZML series DTMF mic that is cabled and jumpered for a
Motorola Spectra. I would like to replace the connector and use it on
an iCom mobile.
I have the pin out for the iCom.
Does anyone out there have a manual and/or diagram for this mic? I
need to know how the mic is built so
Thanks to the generous contributions of George, N3GH, and Jack, K6YC, I have
collected and resized the needed schematics and merged them into complete
manuals- one for the Zetron 38A and one for the Zetron 38Max.
I have already uploaded both manuals in full-page PDF to the Zetron folder
in the
Greetings All!
I have uploaded PDF files of schematics for the Zetron 38A controller.
Have fun!
73, N3GH
George
That's like totally great news, dude!
One very important piece of information missing, however.
Bob M.
==
--- On Tue, 7/29/08, n3gh_1 [EMAIL PROTECTED] wrote:
From: n3gh_1 [EMAIL PROTECTED]
Subject: [Repeater-Builder] Zetron 38a Schematics
To: Repeater-Builder@yahoogroups.com
Date
Hi, I have one of these beasts and have mostly used it for tone encode
and decode. I never got a manual for it, but I remembered how to use it
for that purpose. Now I need to monitor a frequency for other tone
frequencies, and I can't remember the commands to clear the registers
and to read
Can anyone tell me the manufacturer and part number of the 10-pin rear
connector (For J-1) on a Zetron Model 37 Repeater Pal controller?
I want to re-use the controller in another application and need another
10-pin connector.Thanks again for all the help! Mike K2MPH
hi
what is the value for 2 Zetron 36B,Phone Link (whit the documentation
OEM)
i need your advise ,,
gervais
ve2ckn
-Builder@yahoogroups.comRepeater-Builder@yahoogroups.com
Sent: Wednesday, April 23, 2008 11:24 PM
Subject: [Repeater-Builder] Zetron 38A Manual
Does anyone have the schematics for a Zetron Model 38A repeater
controller? The pages are blank in my manual and I need to fix it.
Thanks,
Jack
K6YC
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, April 23, 2008 11:24 PM
Subject: [Repeater-Builder] Zetron 38A Manual
Does anyone have the schematics for a Zetron Model 38A repeater controller?
The pages are blank in my manual and I need to fix it.
Thanks,
Jack
K6YC
Does anyone have the schematics for a Zetron Model 38A repeater controller?
The pages are blank in my manual and I need to fix it.
Thanks,
Jack
K6YC
Does anyone have programming information for the Zetron ZMX dtmf mic?
It is programmable using the dtmf pad on the mic. I am using it on a
Motorola m1225 and it's working great but it has been programmed to
send a dtmf on key down and key upCan't have that..
Thanks
@yahoogroups.com
Subject: [Repeater-Builder] Zetron ZMX dtmf mic
Does anyone have programming information for the Zetron ZMX dtmf mic?
It is programmable using the dtmf pad on the mic. I am using it on a
Motorola m1225 and it's working great but it has been programmed to
send a dtmf on key down and key
: RE: [Repeater-Builder] Zetron model 30 interconnect
I do. Contact direct
K.Paul Boggs.
[EMAIL PROTECTED]
Mountain Emergency Communications
- Original Message -
From: ve5fn
To: Repeater-Builder@yahoogroups.com
Sent: 4/12/2008 1:50:23 PM
HELP! Does anyone have access to the manual for this beast? Our club
has acquired one without a manual.
73 .. Bill
VE5FN
I do. Contact direct
K.Paul Boggs.
[EMAIL PROTECTED]
Mountain Emergency Communications
- Original Message -
From: ve5fn
To: Repeater-Builder@yahoogroups.com
Sent: 4/12/2008 1:50:23 PM
Subject: [Repeater-Builder] Zetron model 30 interconnect
HELP! Does anyone have access
I spent the morning over at the storage shed and found the 48 manual.
Now to find a scanner the wide pullouts may end up in sections.
Mike WA6ILQ
At 05:57 PM 04/02/08, you wrote:
--- In Repeater-Builder@yahoogroups.com, Mike Morris WA6ILQ
[EMAIL PROTECTED] wrote:
If I did, it got
--- In Repeater-Builder@yahoogroups.com, Mike Morris WA6ILQ
[EMAIL PROTECTED] wrote:
If I did, it got misplaced in the move.
OK, well, I can make a copy again. Actually I have one each of the
Model 48 and Model 48B manuals. I am not able to scan them here, so
I'll make paper copies. If
Does anyone have one? I'd love to at least know how to reset one to
default, and what speed the RS-232 interface runs at.
Thanks
Jim WB8AZP
At 04:44 AM 04/01/08, you wrote:
Does anyone have one? I'd love to at least know how to reset one to
default, and what speed the RS-232 interface runs at.
Thanks
Jim WB8AZP
There's a Zetron 48-Jr manual on the Zetron page at www.repeater-builder.com
The parts you are looking for MAY be
Hi Jim and Mike,
To reset Zetron 48B as factory default you can remove U6 from the Smart
Socket and the RAM will be clear. Also you can turn OFF the system and
install JP19 to short the leads together and turn ON, when all the led's
come ON except Transmit, DTMF and Local, remove JP19.
I
Hi all
I have aquired a 38-MAX panel with a ex-pmr repeater unit, but don't have
any manual for it. I have downloaded the Spec sheets from Zetron and see
that I should be able to access the unit via the RS232 port.
1. Do I need software, or can I just use a terminal program like
Hyperterminal
Hi Mike,
You helped me out in the past on my Compa 6 meter station. Tks again.
The Zetreon Model 48 is an plain Jane.
Wesley AB8KD
Those pointers to the data / spec sheet for the 48MAX.
He may have the 48 (plain) model, or even the 48JR model.
Unfortunately the repeater-builder web site has only the data sheets
on several Zetron units, including the 48, the 48JR and the 48MAX.
If anyone has any of the missing PDFs please
Picked up this Model at fort Wayne Hamfest for my MastrII 440 Repeater.
Have been using Software with computer for ID up till now.
See no info on Repeater tech website on this Zetron. anyone know how to
program the Eproms on this unit. Have I bought an White Elephant?
Wesley AB8KD
Picked up this Model at fort Wayne Hamfest for my MastrII 440 Repeater.
Have been using Software with computer for ID up till now.
See no info on Repeater tech website on this Zetron. anyone know how to
program the Eproms on this unit. Have I bought an White Elephant?
Wesley AB8KD
: [Repeater-Builder] Zetron model 48 controller
Picked up this Model at fort Wayne Hamfest for my MastrII 440 Repeater.
Have been using Software with computer for ID up till now.
See no info on Repeater tech website on this Zetron. anyone know how to
program the Eproms on this unit. Have I bought
http://www.zetron.com/data/site/templates/zetrontemplate.asp?area_0=pages/menus/privateradioprodarea_1=pages/products/privateradio/m48-max
http://tinyurl.com/yva5pd
R.Wesley Bazell Jr wrote:
Picked up this Model at fort Wayne Hamfest for my MastrII 440 Repeater.
Have been using Software
Folks,
I just got a Zetron 38A at a hamfest. Works fine in the repeater but I
have tried the password code and no results. It is listed in the book
as 12123#. Someone must have changed it... What do I do now? Can it
be set back to a factory default?
thanks,
ron
take out the chip with the battery and unplug the chip from the battery give
it 3 mins or so and put it back should default.
- Original Message -
From: rwjohn49
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, November 03, 2007 9:11 PM
Subject: [Repeater-Builder
Look inside the unit and find the ram IC that is plugged into the Dallas
Semiconductor battery backup chip. Remove the ram IC from the battery backup
chip for several seconds and plug it back in. It will default back to the
factory original 12123.
The controller will not be in the
Al, I would program the Z38A the way you have with one change. I am sure the
system ID should be the same as the user ID, so instead of assigning the system
ID to an unused user ID, I would use the user ID as the system ID. Just enter
the user number for the tone you are using for normal user
Jim,
Thanks once again for the input help
As it stands tonight the repeater is operational after 5 hours at site
setting up the audio again problem is the base station we use is not that
forgiving with is comes to audio levels (Nokia BSR 150)
On the older Zetron panel which
Hi All,
Jim maybe one for you ?
New Zetron 38A installed this morning so great to have the repeater
back on again until I repair the other logic since we still require
1750Hz access
I have managed to get a bit lost in the programming of the unit (
not a good idea to do programming after you
ALASTAIR GRAHAM wrote:
And sorry I forgot to say I am over here in the UK hence the 15min ident
Oh-I didn't think about that...nevermind!
;c}
--
Jim Barbour
WD8CHL
Jim,
No problems I should have said :- )
Ok one of the local comms guys has swapped me for the newer 38A all working
as should be including the Morse ID every 15 Min's great
Only thing I wont be able to do is get 1750Hz access although I notice on the
alarm side you can change
-Builder@yahoogroups.com
Sent: Wednesday, October 24, 2007 4:18 PM
Subject: [Repeater-Builder] Zetron 38 Panel
Hi All,
I am trying to get the Zetron 38 running on our local 2 meter
repeater (only as a temp measure) due to logic problems
What I want
Morse ident out every 15mins as to comply
radiotech808 wrote:
Hi All,
I am trying to get the Zetron 38 running on our local 2 meter
repeater (only as a temp measure) due to logic problems
What I want
Morse ident out every 15mins as to comply with the regs, the ident
does go out but no radio tx any thoughts
You do know
Hi Jim All,
Firstly the tone panel is a Zetron 38 not an A or max !
Jim you are right about the DTMF ident really only for trouble shooting over
air etc
And sorry I forgot to say I am over here in the UK hence the 15min ident
Speaking to tech at Zetron today he agrees
Hi All,
I am trying to get the Zetron 38 running on our local 2 meter
repeater (only as a temp measure) due to logic problems
What I want
Morse ident out every 15mins as to comply with the regs, the ident
does go out but no radio tx any thoughts
Station ID
At the moment the station id
Subject: [Repeater-Builder] Zetron 38 Panel
Hi All,
I am trying to get the Zetron 38 running on our local 2 meter
repeater (only as a temp measure) due to logic problems
What I want
Morse ident out every 15mins as to comply with the regs, the ident
does go out but no radio tx
, 2007 4:18 PM
Subject: [Repeater-Builder] Zetron 38 Panel
Hi All,
I am trying to get the Zetron 38 running on our local 2 meter
repeater (only as a temp measure) due to logic problems
What I want
Morse ident out every 15mins as to comply with the regs, the ident
does go out
: [Repeater-Builder] Zetron 38 Panel
John,
Thanks for the reply
One thing I do have is the manual although not all DTMF programming commands
work with my panel still suspect it's a hardware issue
Will speak to Zetron tomorrow see what they come up with !
Regards
Al
Maire-Radios
factor are
all in programming. I don't have a book on the unit here but it all can be
done.
John
- Original Message -
From: radiotech808
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, October 24, 2007 4:18 PM
Subject: [Repeater-Builder] Zetron 38 Panel
I've had a Zetron 45B kickin' around for a few years, and now I'd
like to use it ...
Problem is, like many others who live too far away from parts
sources, I have a tendancy to borrow parts from one gadget to build
another.
At one time or another, I borrowed U2 and U30 for a controller
I THINK this is a repeater phone patch, don't find it on the sites
Zetron Link, any ideas???
KF8ZN
Might anyone have a configuration manual for the ZR340? I had one,
but can't seem to find it at this time. It's only a few pages. Maybe
scanning and e-mailing it to me. If so, many thanks !
Paul Metzger
K6EH
[EMAIL PROTECTED]
can any tell me the default program codes for the:
Zetron model 38
and
Zetron model 38A
thank you, John
://www.CharliesElectronics.com
http://www.hello-radio.org
http://www.emergency-radio.org
Original Message
Subject: [Repeater-Builder] Zetron
From: Maire-Radios [EMAIL PROTECTED]
Date: Sat, July 14, 2007 1:59 pm
To: Repeater-Builder@yahoogroups.com
can any tell me the default program
I thought the 38 and 38A were different codes?
John
- Original Message -
From: Charles Mumphrey Kc5ozh
To: Repeater-Builder@yahoogroups.com ; [EMAIL PROTECTED]
Sent: Saturday, July 14, 2007 3:10 PM
Subject: RE: [Repeater-Builder] Zetron
Hey John and the Group!
You may
it looks like the same program code works for both.
thanks John
- Original Message -
From: Maire-Radios
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, July 14, 2007 3:20 PM
Subject: Re: [Repeater-Builder] Zetron
I thought the 38 and 38A were different codes
]
To: Repeater-Builder@yahoogroups.com
Sent: Sat, 14 Jul 2007 11:59 am
Subject: [Repeater-Builder] Zetron
can any tell me the default program codes for the:
Zetron model 38
and
Zetron model 38A
thank you, John
Check Out
any know the access code for the Zetron 39MAX
thanks and it is not 12123
John
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, July 14, 2007 4:42 PM
Subject: Re: [Repeater-Builder] Zetron
John, there is a manual on line
Hi Friends, anyone have a schematic of the Zetron 340 multitone repeater
controller ?
Thanks in advance.
Juan
1 - 100 of 149 matches
Mail list logo