tks, eric, but i was just confirming the correct description of the pin. i am
very familiar with z38max . i have 15 in actual use!!
73
jose
--- On Tue, 4/13/10, Eric Vincent eric...@telus.net wrote:
From: Eric Vincent eric...@telus.net
Subject: RE: [Repeater-Builder] Zetron Controller
Hello,
How many pin is that connector, I think I have some of these in the
inventory.
73' Eric VE7YBC
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yaoogroups.com] On Behalf Of tracomm
Sent: Monday, April 12, 2010 10:33 AM
To: Repeater-Builder@yahoogroups.com
Subject:
AM
Subject: RE: [Repeater-Builder] Zetron Controller Connector-Source
Hello,
How many pin is that connector, I think I have some of these in the inventory.
73' Eric VE7YBC
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yaoogroups.com] On Behalf Of tracomm
Subject: Re: [Repeater-Builder] Zetron Controller Connector-Source
Would that be 8 on bottom row, 7 on top row? Orange 15 pin connector? I can
check as well.
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: Eric Vincent
They are made by Phoenix Contacts. you can get them from Mouser.
Bill
KB1MGH
From: tracomm trac...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Mon, April 12, 2010 12:32:48 PM
Subject: [Repeater-Builder] Zetron Controller Connector-Source
Any one have
Z38 is 15 pin (orange) in straight line
From: La Rue Communications laruec...@gmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Mon, April 12, 2010 11:51:21 AM
Subject: Re: [Repeater-Builder] Zetron Controller Connector-Source
Would that be 8
[mailto:repeater-buil...@yahoogroups.com] De la part de Jose Aguilar
Envoyé : 12 avril 2010 13:29
À : Repeater-Builder@yahoogroups.com
Objet : Re: [Repeater-Builder] Zetron Controller Connector-Source
Z38 is 15 pin (orange) in straight line
_
From: La Rue Communications
Check and see if the DPL is either being presented or programmed as
inverted. My TP-38 panel is opposite of what I tell it to do, even
though PL's always work.
On 1/29/2010 3:56 PM, plaimann wrote:
i have a zetron 48b controller , running 2 motorola vhf sm50 mobiles
via the acdcessory
Just in case you can't find a Zetron 19, take a look at this simplex
repeater controller. I've seen a demonstration on this one and it seems to
work very well. It sells for about $90.
http://www.argentdata.com/products/repeater.html
https://www.argentdata.com/catalog/index.php?cPath=27
a user unkeys is
that it allows in-band links with no ping-pong effects due to the
tails talking to each other.
73 - Jim W5ZIT
--- On Wed, 11/18/09, Eric Lemmon wb6...@verizon.net wrote:
From: Eric Lemmon wb6...@verizon.net
Subject: RE: [Repeater-Builder] Zetron 38A not sending reverse
burst
other.
73 - Jim W5ZIT
--- On Wed, 11/18/09, Eric Lemmon wb6...@verizon.net wrote:
From: Eric Lemmon wb6...@verizon.net
Subject: RE: [Repeater-Builder] Zetron 38A not sending reverse burst
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, November 18, 2009, 1:09 PM
You have discovered one of many dirty little secrets that apply to
aftermarket tone panels. When designing the 38A tone panel, and many other
products, Zetron overlooked the fact that reverse burst is essential in the
repeated audio. From a close examination of the 38A manual and schematics,
it
Anybody have a manual for a Zetron 45, not a 45B, a 45 ?
Mike WA6ILQ
I have 2 of these in service and it is for the pager industry not a repeater
controller. I know of no way to use one on a repeater unless you want it to
also be a paging transmitter. It is tone controlled by the paging terminal and
can output analog voice paging or digital pocsac or golay
At 03:15 PM 03/12/09, you wrote:
Anyone have a pdf for a Zetron Model 35 - unit
i need book to set up
and program.
for a 6mtr repeater in the uk gb3ct thanks from chris
The brochure and the owners manual are on the repeater-builder web site.
We are still looking for the service manual.
Mike
Good afternoon
I am looking for the users manual/service manual for
the Zetron 45B interconnect . Anyone have one they wish to sell or lead me
to a source to get one. I inherited a site that has one but no documentation
was found with it
Hi Alex,
You can download the manual on the repeater builder site:
http://www.repeater-builder.com/zetron/zetron-index.html
Look on the manual you will have many possibility for resetting the machine.
Everything you need is there!
Good Luck.
Eric VE2VXT
_
De :
Hi Ian,
Does anyone have any info on the unit in question that generated those
tones? I'd love to find one - just for memorabilia.
That tone format has been around for a long time in mobile radio (Motorola
Quik-Call I) and is still being used in aviation (ICAO SELCAL) to page
aircraft on
-
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, October 11, 2008 6:37 PM
Subject: Re: [Repeater-Builder] Zetron SCU controller
Hi Ian,
Does anyone have any info on the unit in question that generated those
tones? I'd love to find one - just
Yet is should. It's no different than DTMF.
Chuck
WB2EDV
- Original Message -
From: Milt
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, October 11, 2008 7:29 PM
Subject: Re: [Repeater-Builder] Zetron SCU controller
Lots of equipment can encode the 2+2 Quick Call
On Fri, 10 Oct 2008 15:52:34 -, Ian Miller wrote:
shows on WRTN Buffalo on DISH Network.
VA2IR
I'm SURE you meant Expressvu or Starchoiceright :)
Tedd Doda, VE3TJD
Lazer Audio and Electronics
ESSO plaza at exit 268 off HWY 401
Phone: 519-513-0377
My idea of a Symphony
8 Pistons
They may have used a Zetron in later years, but at the time the program was
made, Zetron wasn't in existence.
See this and you'll have what you seek:
http://www.policeinterceptor.com/emerg.htm
Chuck
WB2EDV
- Original Message -
From: Ian Miller [EMAIL PROTECTED]
To:
That's like totally great news, dude!
One very important piece of information missing, however.
Bob M.
==
--- On Tue, 7/29/08, n3gh_1 [EMAIL PROTECTED] wrote:
From: n3gh_1 [EMAIL PROTECTED]
Subject: [Repeater-Builder] Zetron 38a Schematics
To: Repeater-Builder@yahoogroups.com
Date:
Yep, he did.
The schematics pages in that PDF file are blank (unfortunately it's
all we have).
A good example of Zetron customer service at its best.
I've heard it from several people - they buy Zetron, they shelve the
manual. Several
years later the unit needs repair - maybe they zap a
Doesn't anyone check the website or do a google search anymore??
http://www.repeater-builder.com/zetron/zetron-model-38a-inst%20manual-025-9043y.pdf
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Jack Davis
To:
I have the programming instructions for a Zetron ZML mike. If you think
it is the same, I'll be happy to email it to you.
73, Tony VE3DWI
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of barrypal
Sent: April 20, 2008 10:55
To:
: RE: [Repeater-Builder] Zetron model 30 interconnect
I do. Contact direct
K.Paul Boggs.
[EMAIL PROTECTED]
Mountain Emergency Communications
- Original Message -
From: ve5fn
To: Repeater-Builder@yahoogroups.com
Sent: 4/12/2008 1:50:23 PM
I do. Contact direct
K.Paul Boggs.
[EMAIL PROTECTED]
Mountain Emergency Communications
- Original Message -
From: ve5fn
To: Repeater-Builder@yahoogroups.com
Sent: 4/12/2008 1:50:23 PM
Subject: [Repeater-Builder] Zetron model 30 interconnect
HELP! Does anyone have access to the
I spent the morning over at the storage shed and found the 48 manual.
Now to find a scanner the wide pullouts may end up in sections.
Mike WA6ILQ
At 05:57 PM 04/02/08, you wrote:
--- In Repeater-Builder@yahoogroups.com, Mike Morris WA6ILQ
[EMAIL PROTECTED] wrote:
If I did, it got
At 04:44 AM 04/01/08, you wrote:
Does anyone have one? I'd love to at least know how to reset one to
default, and what speed the RS-232 interface runs at.
Thanks
Jim WB8AZP
There's a Zetron 48-Jr manual on the Zetron page at www.repeater-builder.com
The parts you are looking for MAY be
Hi Jim and Mike,
To reset Zetron 48B as factory default you can remove U6 from the Smart
Socket and the RAM will be clear. Also you can turn OFF the system and
install JP19 to short the leads together and turn ON, when all the led's
come ON except Transmit, DTMF and Local, remove JP19.
I
Hi Mike,
You helped me out in the past on my Compa 6 meter station. Tks again.
The Zetreon Model 48 is an plain Jane.
Wesley AB8KD
Those pointers to the data / spec sheet for the 48MAX.
He may have the 48 (plain) model, or even the 48JR model.
Unfortunately the repeater-builder web site has only the data sheets
on several Zetron units, including the 48, the 48JR and the 48MAX.
If anyone has any of the missing PDFs please
have used a number of the 48 on repeaters it will make a very good controller
but it is design for business use not so much ham.
- Original Message -
From: R.Wesley Bazell Jr
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 01, 2007 5:17 AM
Subject:
http://www.zetron.com/data/site/templates/zetrontemplate.asp?area_0=pages/menus/privateradioprodarea_1=pages/products/privateradio/m48-max
http://tinyurl.com/yva5pd
R.Wesley Bazell Jr wrote:
Picked up this Model at fort Wayne Hamfest for my MastrII 440 Repeater.
Have been using Software
take out the chip with the battery and unplug the chip from the battery give
it 3 mins or so and put it back should default.
- Original Message -
From: rwjohn49
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, November 03, 2007 9:11 PM
Subject: [Repeater-Builder]
Look inside the unit and find the ram IC that is plugged into the Dallas
Semiconductor battery backup chip. Remove the ram IC from the battery backup
chip for several seconds and plug it back in. It will default back to the
factory original 12123.
The controller will not be in the
Al, I would program the Z38A the way you have with one change. I am sure the
system ID should be the same as the user ID, so instead of assigning the system
ID to an unused user ID, I would use the user ID as the system ID. Just enter
the user number for the tone you are using for normal user
Jim,
Thanks once again for the input help
As it stands tonight the repeater is operational after 5 hours at site
setting up the audio again problem is the base station we use is not that
forgiving with is comes to audio levels (Nokia BSR 150)
On the older Zetron panel which
ALASTAIR GRAHAM wrote:
And sorry I forgot to say I am over here in the UK hence the 15min ident
Oh-I didn't think about that...nevermind!
;c}
--
Jim Barbour
WD8CHL
Jim,
No problems I should have said :- )
Ok one of the local comms guys has swapped me for the newer 38A all working
as should be including the Morse ID every 15 Min's great
Only thing I wont be able to do is get 1750Hz access although I notice on the
alarm side you can change
The Z38A instruction manual can be down loaded from
http://www.repeater-builder.com/zetron/zetron-index.html
The 38 is a different puppy from the 38A, however.
More that one person has voiced the comment that Zetron is one
of those companies that has absolutely no regard for their customers.
It
radiotech808 wrote:
Hi All,
I am trying to get the Zetron 38 running on our local 2 meter
repeater (only as a temp measure) due to logic problems
What I want
Morse ident out every 15mins as to comply with the regs, the ident
does go out but no radio tx any thoughts
You do know
Hi Jim All,
Firstly the tone panel is a Zetron 38 not an A or max !
Jim you are right about the DTMF ident really only for trouble shooting over
air etc
And sorry I forgot to say I am over here in the UK hence the 15min ident
Speaking to tech at Zetron today he agrees
what you are talking about the ID in DTMF and the time factor are all in
programming. I don't have a book on the unit here but it all can be done.
John
- Original Message -
From: radiotech808
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, October 24, 2007 4:18 PM
John,
Thanks for the reply
One thing I do have is the manual although not all DTMF programming commands
work with my panel still suspect it's a hardware issue
Will speak to Zetron tomorrow see what they come up with !
Regards
Al
Maire-Radios [EMAIL PROTECTED] wrote:
: [Repeater-Builder] Zetron 38 Panel
John,
Thanks for the reply
One thing I do have is the manual although not all DTMF programming commands
work with my panel still suspect it's a hardware issue
Will speak to Zetron tomorrow see what they come up with !
Regards
Al
Maire-Radios
I think the ID in DTMF you are talking about is the user ID which is
transmitted at the end of a transmission as the bubble up. The DTMF sequence
is the user number.
If you want to have the Z38A transmit an ID every 15 minutes in Morse whether
it has been active or not, put a user number
Hey John and the Group!
You may want to do a little more reading of this groups bible.
IMHOTry this link:
http://www.repeater-builder.com/zetron/zetron-model-38A025-9043Y.pdf
Might be a little easier than someone telling you the many codes...
Enjoy!
Charlie
It is not the class of license the
I thought the 38 and 38A were different codes?
John
- Original Message -
From: Charles Mumphrey Kc5ozh
To: Repeater-Builder@yahoogroups.com ; [EMAIL PROTECTED]
Sent: Saturday, July 14, 2007 3:10 PM
Subject: RE: [Repeater-Builder] Zetron
Hey John and the Group!
You may
it looks like the same program code works for both.
thanks John
- Original Message -
From: Maire-Radios
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, July 14, 2007 3:20 PM
Subject: Re: [Repeater-Builder] Zetron
I thought the 38 and 38A were different codes
John, there is a manual on line at the Repeater-Builder site, but your
unit may be an earlier version of the EPROM than the one documented in
that manual.
The default decode sequence is 12345# if it is in the factory original
state. I had several that were not, and found that I could remove
any know the access code for the Zetron 39MAX
thanks and it is not 12123
John
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, July 14, 2007 4:42 PM
Subject: Re: [Repeater-Builder] Zetron
John, there is a manual on line
and dislikes. Over
the years we have had a lot of repeaters and still do that use Zetron
controllers.
thanks John
- Original Message -
From: Bill Hudson
To: [EMAIL PROTECTED]
Sent: Thursday, April 12, 2007 11:55 PM
Subject: RE: [Repeater-Builder] Zetron 38 vs. 38a
Let
Be aware that the Zetron 38 has been around for a long time. It has
gone through many revisions and depending on what version you are
getting, lots of features you might find in the manual will not be
there.
For instance, I have a Zetron 38 that will not operate on just COS. It
must have
Bill Hudson wrote:
Let me help you a little with this 38 vs. 38A thing.
snip
If you were talking to someone with a 38 on the repeater, and the other
station answers (keys up) during the hang delay, the repeater passes the
audio from the responding station, but drops out after the normal
On 4/12/07, mthoeft [EMAIL PROTECTED] wrote:
Hello and thanks for having me on the group
Does anyone know/is there any difference between a Zetron Model 38 and
Model 38A, aside from the obvious descriptor change?
I can only find a manual on the Zetron website for the 38A and want to
know for
-
From: Nate Duehr
To: [EMAIL PROTECTED]
Sent: Thursday, April 12, 2007 7:34 PM
Subject: Re: [Repeater-Builder] Zetron 38 vs. 38a
On 4/12/07, mthoeft [EMAIL PROTECTED] wrote:
Hello and thanks for having me on the group
Does anyone know/is there any difference between a Zetron
PROTECTED]Nate Duehr
To: mailto:[EMAIL PROTECTED][EMAIL PROTECTED]
Sent: Thursday, April 12, 2007 7:34 PM
Subject: Re: [Repeater-Builder] Zetron 38 vs. 38a
On 4/12/07, mthoeft mailto:[EMAIL PROTECTED][EMAIL PROTECTED] wrote:
Hello and thanks for having me on the group
Does anyone know
Mike, you might just call Zetron and ask them for the tech docs you need.
I bought a set for a Zetron gadget I acquired and they were quite helpful.
Also, the price was quite reasonable. I don't recall how much it was, but
it was definitely well within my ham budget, which is miniscule.
73,
Looking at the inside of an older Zetron 38A I thought I was looking at
the original Apple II. Same processor, same amount of memory ect. If
you find a schematic, let me know. I have not found one either.
73 - Jim W5ZIT
-Original Message-
From: [EMAIL PROTECTED]
To:
Hi Les
Use the Audio interface as one would use for your
standard setup and if you could imagine place the
Zetron input and output audio in a parallel fashion
.In this way all dtmf etc would be used normally.
With you ussing it to control the tail you would have
the cos line connected.
I am sure
Cecil,
If you don't find what you want at:
http://www.repeater-builder.com/other-mfrs/zetron-model-38A025-9043Y.pdf
then contact Technical Support at www.zetron.com.
73, Eric Lemmon WB6FLY
Cecil Lale KF6ZOK wrote:
...What is the difference between the regular 38 and the 38A?...
For those interested parties and maybe someone in the not too distant
future that may need some help .
After determining how to get the ZETRON 38A out of transmit and eliminated
the constant carrier indication I still had serial coomunications issues.
We will address the issues one at a time.
Zetron 38A 702-9075 rev. P
I have built the serial interface cable for the second time and checked the pinout multiple times.
I am using MS's canned Hyperterm program.
I have tried both 1200 and 4800 baud 8 bit no parity 1 check bit
I only have the power connections at this time. No other
Hi Tim
1st make sure that the carrier light does not stay on
as if the SITE alarm is active for POWER UP it waits
for the carrier to go off before sending tones out.
This scenario produces a lock-up catch22 situation.
Best try Bitcom as all should be ok on that program.
Common problems with
I may have an extra. Is this the connector that wires connect to that plugs into the Zetron?
Russ
On 5/21/05, Tim Billingsley [EMAIL PROTECTED] wrote:
Is anyone aware of an alternate source for the 15 pin terminal strip onthe back of the Zetron 38A? I am guessing that this is probably a
Thanks to all that replied.
I appreciate your time and information.
73
Tim KD5CKP
Yahoo! Mail
Stay connected, organized, and protected. Take the tour:
http://tour.mail.yahoo.com/mailtour.html
Yahoo! Groups Links
* To visit your group on the web, go to:
I have about 4 to 6 of the 39 and happy with them.
I have never had a book on them but if you use the 38 book it will help you.
the rest will be on the display.
I have a number 38 I would like to trade for the 39
John
- Original Message -
From: rel60411 [EMAIL PROTECTED]
To:
yes hold the reset down after powering up the unit for 10 seconds it
will reset all to factory default
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
The manual says, page 4-61 :
with DTMF send 3282# 2532# Will clear all memory, and
setup default settings.
Hope this helps.
Juan
- Original Message -
From:
bretb9
To: Repeater-Builder@yahoogroups.com
Sent: Monday, February 21, 2005 7:56
PM
Subject:
Dave,
I have a Philips badged version of the 38A in use on GB3DX to lockout audio
on the main Rx when remote rxs are in use.
The unit seems to decode into the noise more than any mobile/portable set.
I think a spare unit is available- contact me off list.
[EMAIL PROTECTED]
Ian-G8PWE -Walsall
Hi,
Thanks for the reply, I don't have problem programming the unit via
the panel or through a computer. But I need the ability to turn off/on a
user or
some other feature remotely via dtmf. I have two model 38's that work fine,
thought the dtmf codes would be the same for both. Seems that
Try this link to a PDF on Zetron's site for the Z38A It may be what
you need.
http://www.zetron.com/pages/english/specpdf/38maxspc.pdf
Good luck, Martin W4FOT
==
-Original Message-
From: mdnosliw [mailto:[EMAIL PROTECTED]
Sent: Friday,
Title: Zetron M 35 Patch
try location 54
- Original Message -
From:
Steve Bosshard
To: [EMAIL PROTECTED] ; Repeater-Builder@yahoogroups.com
Sent: Thursday, January 15, 2004 9:06
AM
Subject: [Repeater-Builder] Zetron M 35
Patch
Anyone have an easy way
Hi Steve
I do appologise that I have not gotten back to you-I
can not find it amoungst my files but my ex place of
work does have a copy so I will get it from them
perhaps tonight or tomorrow.
Regards
Bradley Glen ZS5WT
--- Steve S. Bosshard (NU5D) [EMAIL PROTECTED]
wrote:
Hi Glen, any luck
Hi Glen, any luck on the Model 35?
Steve
[EMAIL PROTECTED]
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
77 matches
Mail list logo
