No 2 diesel is what we burn in the our
vehicles and machinery when it's above about -10 F. A mixture of
No 1
and No 2 down below that down to about -30 F.
In practice in Minnesota, your temps are about 10F to 20F too low.
Maybe we warm back up more during the day. But I have run No 2
Subscribe to the Renewable Energy Newsletter
Discussion Boards. Read about Sustainable Technology:
http://www.green-trust.org
[EMAIL PROTECTED]
- Original Message -
From: George Wessel [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Saturday, October 12, 2002 3:41 PM
Subject: Re
Diesel and No. 3? It is not a
classification system we use in the UK. Does it relate to viscosity? Are
there any other No. of Diesel Oils?
Ken
- Original Message -
From: George Wessel [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: 14 October 2002 05:11
Subject: Re: [biofuel
Steve
Summers here are very hotand I was thinking of a summer time fuel only.
But to help thin the mixture out a little I was wondering if I could add
10 to 20 percent ethanol. I've heard of adding ethanol to biodiesel, but
not to dino diesel. Is it possible or wise?
George
Steve Spence
From what I have read, a general rule of thumb is; up to 4 you would
be better off with scrubbers, anything bigger than 4 and scrubber will
tend to channel, from 4 up to 8 you would do well with packing like
pall rings and the like, from 10 and up you would do well to use
plates. However I
He would do well to contact his states Dept of Revenue and ask what
permits are needed in his state of residence.
[EMAIL PROTECTED] wrote:
In the US, home brewers need to get a small fuel producer permit
from the US Bureau of Alcohol, Tobacco and Firearms. It is fairly
easy to aquire, and
[EMAIL PROTECTED] wrote:
Very mild on this list compared to others. When I replied to a post on
another list that nothing had ever been contributed by Arabs I asked if the
Alphabet and our system of numbers wouldn't be considered a contribution.
The reply I got was the people are a different
You don't mention what kind of hydraulic system your using. In my
machinery I have to change the hydraulic oil on a annual basis because
the additives in the oil break down, not the oil. After the additives
break down the system is only about half as effective as before. I just
got to
[EMAIL PROTECTED] wrote:
Thanks for answering.
I had thought it would stop war in the OPEC countries. THat one isn't clear
to me.
(snip)
I would offer that as the OPEC nations melt down from the oil barons of
the world of today, back to nomadic goat herders that the killing would
be blood
, George Wessel wrote:
Hello Everybody
Now that I understand the problem with gasohol. I need to ask another
question. If you mix one part anhydrous alcohol with one part gasoline
to create a E50 fuel. Will it suck moisture out of the air like
anhydrous alcohol will. If not then how high
Thanks Keith
I guess we needed that. I knew it had to be to simple to be ture.
George
[EMAIL PROTECTED] wrote:
AFAIK it's not the water that separates from the ethanol and
gasoline. The water causes the ethanol and the gasoline to separate.
There's stuff in the archives about this.
Hello Everybody
Now that I understand the problem with gasohol. I need to ask another
question. If you mix one part anhydrous alcohol with one part gasoline
to create a E50 fuel. Will it suck moisture out of the air like
anhydrous alcohol will. If not then how high a alcohol content can
I have the same problem, I don't understand what's happening to the
gasoline when you add ethanol and water and I know of no one I can ask
other than this group.
I would be inclined to believe the authors of the various books I've
read that the water will fall out and cause problems. Many
Or, my personal favorite, to gasify(Thermal Hydrolysis) the stover
(residues) to Synthesis gas with a Water Shift reaction to a
catalytic reactor to synthetic Diesel fuel
Motie
Would you have any info or web pages etc. on this Thermal Hydrolysis? I
have never heard of this and am very
Hi All
I have Micki's Book. The chapter on Methanol does not say how to make
methanol. It says that making methanol is a completely different
process and this book doen not tell you how to make methanol. It goes on
to say that methanol is made by heating wood ash, waste and stalks and
then
[EMAIL PROTECTED] wrote:
Some more info:
see the zip-file (ppt). For small scale plants it more easy to
recommendable to use a once-through process. the other
problem is the supply with H2 and CO or H2 and CO2. This can
be done by using a reformer with Pt-cat to reform CH4. The
Soryy for the duplicate but I forgot to ask. Where would I find the
zip-file (ppt) mentioned below?
George
[EMAIL PROTECTED] wrote:
Some more info:
see the zip-file (ppt). For small scale plants it more easy to
recommendable to use a once-through process. the other
problem is the
The other approach makes methanol from methane and steam.
This is the typical methanol synthesis method used today, with
the methane coming from natural gas. It could also use methane
from biomass digestion.
Both approaches need catalysts, but not the same catalysts.
Hi
Could you give
What's your plan for the methanol, by the way? You want to make fuel
ethanol, are you considering using methanol as a fuel?
regards
Keith Addison
Journey to Forever
Handmade Projects
Osaka, Japan
http://journeytoforever.org/
Hello Keith
As I understand it Methanol can be
19 matches
Mail list logo