Hello all,
In fact, it is running well, the more difficult is to assign a usb port and
map it to a link in kannel. You could do that using the hotplug usb in linux
and extract some relevant information in the signature of each usb device.
I adapt a script I found in the mailing list and I'm
Hi,
Did the different SMPP account are using the same SMSC provider ?
Are you going through a router for this connection ? are you limited to NAT
port on it ?
Regards
-Original Message-
From: Djiby SY [mailto:[EMAIL PROTECTED]
Sent: lundi 21 mai 2007 20:44
To: users@kannel.org
Cc:
So it looks it should be a issue with one of your SMPP provider!?
Did you setup the connection timeout correctly ?
Regards
-Original Message-
From: Djiby SY [mailto:[EMAIL PROTECTED]
Sent: mardi 22 mai 2007 11:42
To: info.ubichip
Cc: users@kannel.org; 'devel Devel'
Subject: Re: MT
Hi,
It happened some time if you choose to make the reading from the sim or from
the phone. Some phones first put all the sms in the sim and then the memory.
So if your sim in not full, the sms is still going in a part kannel is not
reading.
Another explication is how your sms-service is setup,
Hello,
I'm currently trying to interface Tambur and Kannel?
Does anyone got some feedback on this ?
In advance, thanks for your answer
_
Antivirus avast! http://www.avast.com : message Sortant sain.
Base de donnees virale (VPS) : 000773-0, 05/09/2007
Analyse le : 05/09/2007
What you could do is to define all the smsc account in one time. But uses
start/stop function to enable/disable some route.
Regards
-Original Message-
From: Alejandro Guerrieri [mailto:[EMAIL PROTECTED]
Sent: vendredi 7 septembre 2007 07:44
To: users@kannel.org
Subject: Re: dynamic
Hello all,
Does anyone got some experience and advice on software or packages to make
provisionning and billing for kannel ?
I tried to evaluate Tambur that got as well a ineresstant feature of SMS
router but because of the lack of cimmunity around it, it looks dead.
Regards
_
?
regards
_
From: preeteesh kakkar [mailto:[EMAIL PROTECTED]
Sent: dimanche 9 septembre 2007 14:08
To: info.ubichip
Cc: users@kannel.org
Subject: Re: Provisionning and billing in Kannel
You can try writing your own custom scripts, the only one i have used is
Tambur. yes the support
Please be more accurate and give some logs in order the community could help
you.
Regards
-Original Message-
From: longhorn123 [mailto:[EMAIL PROTECTED]
Sent: lundi 10 septembre 2007 04:55
To: users@kannel.org
Subject: Kaneel sending messages by it self !!
hi ..
The case with me is
Hi,
It looks your text content is not encoded, there is a space inside between
the word cgpa and hivm.
Regards
-Original Message-
From: longhorn123 [mailto:[EMAIL PROTECTED]
Sent: mardi 11 septembre 2007 05:08
To: users@kannel.org
Subject: RE: Kaneel sending messages by it self !!
Did you put dlr-mask attributes in the url your are using when sending sms ?
It the case, the dlr is still sending specially if you put a mask like 31
(all the dlr).
Regards
_
From: Otandeka Peter [mailto:[EMAIL PROTECTED]
Sent: mardi 11 septembre 2007 11:28
To:
,
Alejandro
On 9/13/07, info.ubichip [EMAIL PROTECTED] wrote:
Hi,
To answer your Q1 and Q4:as far as I know, the priority parameter interact
directly with the kannel queue, that means a message with a higher
priority
is sent quicker than previous one. I'm using it to pass debug and
emergency
sms
: vendredi 14 septembre 2007 09:33
To: info.ubichip
Cc: users@kannel.org
Subject: Re: Kannel queue management
The priority flag is part of the SMPP specs and gets set using the
priority parameter. I agree with you, I don't think that any SMSC
would base his internal priority queue on my behalf
Yes, you could try it.
Otherwise the first thing to test it to encode the text you put in the
http request!
Hope that helps
-Original Message-
From: Nicolas de Bari Embriz Garcia Rojas [mailto:[EMAIL PROTECTED]
Sent: dimanche 16 septembre 2007 21:46
To: info.ubichip
Cc: users
Hello,
Could you please precise if you are using the memory from the modem or the
sim memory in your kannel configuration ?
I noticed something in some modem from nokia, whatever you tell kannel to
use the handset memory, you have to wait until the sim sms memory is full
before the read
(usually
SM).
Hope I help
_
From: preeteesh kakkar [mailto:[EMAIL PROTECTED]
Sent: mardi 18 septembre 2007 13:23
To: info.ubichip
Cc: users@kannel.org; [EMAIL PROTECTED]
Subject: Re: Deleting Received SMS from Kannel Modem
Hi, Thanks for reply can you tell me how can i check
Could you please be more precise in your request ?
What is making your interface ?
regards
-Original Message-
From: Martin Rodriguez [mailto:[EMAIL PROTECTED]
Sent: vendredi 28 septembre 2007 13:26
To: users@kannel.org
Subject: Problem with Kannel Thread
Hi.
I have any problem with the
Hi Mathieu,
Some answer to your questions :
1/ it could be retrie but if no route are found, they stay until you restart
Kannel and so Kannel will retry them
2/ yes, find the files kannel.store and kannel.store.bak , delete them and
restart kannel
Hope that help
_
From:
Hi Serge,
First of all, make some basics verification such as :
- is your modem is connected on the good tty, it could be verified
using minicom and basic command such as ATZ, please refer to minicom help
page for details informations,
- is your modem got the pin sim card ?
Hope
Hi Serge,
Please be more precise in your request if you want the community answer you.
Precise at least the type of connection (SMPP, AT modem...) and your need.
Regards
-Original Message-
From: Beaulois serge Yoboué [mailto:[EMAIL PROTECTED]
Sent: mardi 2 octobre 2007 14:14
To:
Whatever your log rotate size is, you will have to « hold » kannel in order
to change the destination of the log. I am making a log rotate each day for
convenient archive, I suggest you not to have to much big log file in order
not to slow down your system.
Hope that help
Regards
Hi,
You could use directly send_sms table.
Hope that helps
_
From: Michael Habashy [mailto:[EMAIL PROTECTED]
Sent: vendredi 12 octobre 2007 16:49
To: users@kannel.org
Subject: is there a way to send sms text from mysql db??
Can i send sms messeges from mysql ?
I
What type of backend program are you using ?
thanks
_
From: shehan [mailto:[EMAIL PROTECTED]
Sent: dimanche 14 octobre 2007 23:05
To: 'Vahid Ghafarpour'
Cc: users@kannel.org
Subject: RE: 150 sms/sec through kannel
Tx a lot for info. Backend program can be handle
assistance.
I am using linux red hat. I mistakinly move all files in my root directory
to anotehr directory - mv /* /var/www. Nothing works. Plese how can I
move the files back.
Thanks.
Ismail
- Original Message -
From: info.ubichip [EMAIL PROTECTED]
To: 'Alexander Bukharin' [EMAIL PROTECTED
Hi,
First type netstat -all | grep 9200
Then if multiple instances of the box are running , make it kill by
Killall -9 bearerbox and so on
Then in order to have multiple smpp account, copy paste the group smsc as
many you want.
Regards
-Original Message-
From: Alejandro Guerrieri
Hi,
If the configure process is not finding the path of kannel, you have to
tell it with options like you build kannel before.
Hope that helps
_
From: Aaron Simmons [mailto:[EMAIL PROTECTED]
Sent: lundi 22 octobre 2007 06:35
To: users@kannel.org
Subject: building sqlbox
Hi,
Could you please be more specific ? with parameter are you looking for ?
AFIK, the dlr returns only dlr flag.
Regards
-Original Message-
From: Kyriacos Sakkas [mailto:[EMAIL PROTECTED]
Sent: lundi 22 octobre 2007 07:18
To: users@kannel.org
Subject: DLR optinal parameters
Hi all,
Hi,
If the message is still in the network, it will be resent to your mobile
when it sign its activity to the network. If you phone is not up after a
time, the message could expired without has been received. Could you setup
the expiracy period when you submit the message but in many network, the
Please update to kannel 1.4.1
And it looks that your kannel.conf is not good, I suggest you send it to the
mailing list.
Regards
_
From: carla [mailto:[EMAIL PROTECTED]
Sent: lundi 22 octobre 2007 15:27
To: users@kannel.org
Subject: WARNING: Cannot find SMSCConn for
Hello all,
Does someone has some experience with the mecanisme of the retry when kannel
retries a sms on an smsc/modem and should send it to a url that has been
specified in the documentation :
http-request-retry : If set, specifies how many retries should be performed
for failing HTTP requests
Hi,
Check the maximum dlr kannel is able to handle at a time, it should be 512
by default, and so could not be enough for uour traffic.
Regards
-Original Message-
From: Fredrik Jeansson [mailto:[EMAIL PROTECTED]
Sent: mercredi 31 octobre 2007 14:15
To: users@kannel.org
Subject:
Hi,
The more simple is to use one modem attached to kannel and some simple php
scripts and the sms-service feature of kannel.
Regards
_
From: Ady Wicaksono [mailto:[EMAIL PROTECTED]
Sent: mercredi 31 octobre 2007 21:48
To: Tracy R Reed
Cc: users@kannel.org
Subject: Re:
Hi,
The best is to get the source code and read it !
Hope that helps
_
From: Yadira Cruces [mailto:[EMAIL PROTECTED]
Sent: vendredi 2 novembre 2007 15:22
To: users@kannel.org
Subject: Interfase to Kannel
Hi all:
I pretend to develop a module which should send messages
Hi all,
AFAIK, send content through SMS should be managed by a protocol such as SAR
: Segmentation And Reassembly, this is a Mécanism used to segment and
reassemble the different paquets
SAR is used with wap gateway and is supposed to be handled by the phone as
well.
The fact that
Use a grep on the log file !
Hope that help
_
From: Otandeka Simon Peter [mailto:[EMAIL PROTECTED]
Sent: mardi 6 novembre 2007 09:49
To: users@kannel.org
Subject: Separate Logs
Hello guys,
I need your help.
I wish to have two separate log tables.
One for holding
USB port changes everytime you conect/diconnect the modem, it is manage by
some hot process in linux. You have to make a small developpement to make
the recognition correctly and map you usb. I did it and manage chain of usb
by this way, it is quite tricky to debug!
Regards
_
You could get all these informations from the sent_sms table in sqlbox.
Hope that helps.
-Original Message-
From: Knaan Ratosh [mailto:[EMAIL PROTECTED]
Sent: dimanche 11 novembre 2007 02:28
To: seik
Cc: users@kannel.org
Subject: RE: audit sent and queued messages to DB
The problem is
Don't know it the misspelling 'mySql' with a capital S could be the issue
???
You have to provide your conf file in order we take a look on the full
configuration.
Regards
-Original Message-
From: Knaan Ratosh [mailto:[EMAIL PROTECTED]
Sent: dimanche 11 novembre 2007 02:32
To: Rodrigo
First, you have to compile as a daemon and after depending of your system,
you have to make it running at the launch. It is bascaaly explain in the
manual.
_
From: Sarfaraz Jamal [mailto:[EMAIL PROTECTED]
Sent: dimanche 11 novembre 2007 15:51
To: users@kannel.org
Subject: Setting
Hello,
I got quite the same pictures, 6 sec per msg for MT. it could depend if you
are using the sim memory or the modem one.
Regards
-Original Message-
From: Alvaro Cornejo [mailto:[EMAIL PROTECTED]
Sent: mardi 13 novembre 2007 15:17
To: users@kannel.org
Subject: Re: Re[2]: modem
A more simple solution to drop the call, is to forward all the call to the
answer machine inconditionnally and you will not be annoyed ;-)
-Original Message-
From: seik [mailto:[EMAIL PROTECTED]
Sent: mardi 13 novembre 2007 14:13
To: Alvaro Cornejo
Cc: users@kannel.org
Subject: Re:
I think you are speaking about USSD request. I'm not sure Kannel could
handle both reading of incoming sms and USSD channel that could be done
through AT command.
Does someone has some similar experience ?
-Original Message-
From: Alvaro Cornejo [mailto:[EMAIL PROTECTED]
Sent: lundi 19
I think the question is more : do you take care of the wap gw or your telco
has already a wap gateway ?
After it will be more easy to answer your question
BR
_
From: Sriram [mailto:[EMAIL PROTECTED]
Sent: lundi 19 novembre 2007 04:15
To: users@kannel.org
Subject: WAP gateway
Hello all,
Does someone have any informations on ussd kernel or AT kernel ?
I know it is not relative straight to kannel but it could be a plugins or a
standalone application.
Regards
_
Antivirus avast! http://www.avast.com : message Sortant sain.
Base de donnees virale (VPS) :
Yes but in this solution, you have to stop kannel and then make your kermit
stuff, isnt it ?
_
From: Luki Lusiano [mailto:[EMAIL PROTECTED]
Sent: mardi 20 novembre 2007 01:42
To: users@kannel.org
Subject: Re: can kannel check my credit using *888# command
Hi Alvaro Cornejo
If you have a link to the operator billing system, it is possible, otherwise
it is not possible.
-Original Message-
From: Sriram [mailto:[EMAIL PROTECTED]
Sent: mardi 20 novembre 2007 04:04
To: Alvaro Cornejo; Luki Lusiano
Cc: users@kannel.org
Subject: Re: can kannel check my credit using
Hello,
I'm using monit to monitor all the other process on our Kannel servers. But
it doesn't make specific monitoring of kannel.
Regards
-Original Message-
From: Alvaro Cornejo [mailto:[EMAIL PROTECTED]
Sent: jeudi 22 novembre 2007 08:39
To: users@kannel.org
Subject: Kannel and MRTG
Hi,
We have plenty of Nokia12 working in usb.
my first advice : use a lower speed, the bottle neck is never the serial
speed but more the dialogue AT with the nokia, so you will not have major
improvement with high speed.
my second advice : be carefull the usb is still on the same unix file
Hello all,
For my kannel and some others purposes, I need to have the time clock from
the operator network. Does someone know an AT command to do that ?
Thnaks in advance
_
Antivirus avast! http://www.avast.com : message Sortant sain.
Base de donnees virale (VPS) : 071129-0,
information from google.
Thanks for the answer
-Original Message-
From: seikath [mailto:[EMAIL PROTECTED]
Sent: vendredi 30 novembre 2007 00:49
To: info.ubichip
Cc: users@kannel.org
Subject: Re: Operator network time
as far as I know, AT commands get the time from the device its ME realtime
clock
when you launched it, it appears in the log and the status page
_
From: Siddharth Verma [mailto:[EMAIL PROTECTED]
Sent: vendredi 30 novembre 2007 03:32
To: users@kannel.org
Subject: how to find the running kannel version
Hi All,
I m sending some details,this is the directory
-Original Message-
From: seikath [mailto:[EMAIL PROTECTED]
Sent: vendredi 30 novembre 2007 11:13
To: info.ubichip
Cc: users@kannel.org
Subject: Re[2]: Operator network time
well, same here, after i told them they are late with 15 minutes
now the operators and me sync from same ntpdate servers
so
Take a look on the commercial mailing list
-Original Message-
From: Gert Horne [mailto:[EMAIL PROTECTED]
Sent: lundi 3 décembre 2007 12:10
To: users@kannel.org
Subject: Uk networks info
Hi all,
Please help me
I would like some contact information to any of the UK mobile providers
Hello,
Please be more specific. There is alternative :
1/ use wap push to send the application
Or 2/ personnalized the header UDH in order to send the sms to the
correct port
Hope that help
-Original Message-
From: Angel Gomez [mailto:[EMAIL PROTECTED]
Sent: jeudi 13
it exist a smpp plugins to make kannel act as a smsc, but it is not free,
you should ask the creator of kannel ;-)
to use kannel as smpp client, it is built in.
hope that help
_
From: teoh [mailto:[EMAIL PROTECTED]
Sent: jeudi 13 décembre 2007 21:38
To: users@kannel.org
Subject:
hello,
12=8+4 so it is Delivered to smsc and queued
and yes you have to put 31 to have all
_
From: Shalini Yadav [mailto:[EMAIL PROTECTED]
Sent: dimanche 16 décembre 2007 03:44
To: users@kannel.org
Subject: delivery_status code value
Hi All,
I few months back I have ported
hello,
first I advised you to read the user manual you could find in www.kannel.org
Kannel got a http API that provide you basic send mechanism.
for billing, you have to make your own script based on the mysql table of
kannel. You could use the file access.log that provide all the needed
hello,
there is two way to make localisations :
- from the terminal, you ask for cellid, lac and you send it to a server
- from the network, the operator get the localisation from the BTS and
HLR. on this case, the information is not always update, in case the mobile
didn't make a call
the kannel mailing list.
hope it helps
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: lundi 24 décembre 2007 20:08
To: info.ubichip; 'mauro'; users@kannel.org
Subject: Re: user localization
Hi
How can one query the terminal or network for this info?
Thanks.
Ismail
hi all,
I'm using Monit to do alert when Kannel is down, but I 'ma interessed in
your scripts, so please put them on an URL where the kannel list could
download it. thanks in advance.
ps : do anyone has script to handle account and cutomers, as well to make
billing ?
_
From: Mads
It looks an issue with your sim card. It could need a PIN number to enter.
Put your sim card in a normal phone and disabled the PIN number to fit
your configuration file below (you remove the pin number).
Hope it helps
-Original Message-
From: Blackman Anthony [mailto:[EMAIL PROTECTED]
Are you sure only one kannel process is running at the time ?
-Original Message-
From: Rafael Bernardes [mailto:[EMAIL PROTECTED]
Sent: mardi 8 janvier 2008 09:49
To: Alvaro Cornejo
Cc: users@kannel.org
Subject: Re: Problem Modem D301 USB
Im search in the list but nothing to see work:
the limit is more on the number of sms to handle at a time , specially if
you are using dlr report
_
From: ashwani [mailto:[EMAIL PROTECTED]
Sent: mardi 8 janvier 2008 22:15
To: 'Kannel Users'
Subject: maximum SMSC kannel support
Hi everyone,
What is the maximum number of SMSC
You have to check the number of sms that kannel handle at a time, by default
it is 512, check the manual for further details
Regards
-Original Message-
From: Dave Jong A Lock [mailto:[EMAIL PROTECTED]
Sent: mercredi 9 janvier 2008 04:45
To: users@kannel.org
Subject: RE: maximum SMSC
you could make a telnet and then a GET on the http port to see what it
return.
are you sure to have all the kannel process running ?
hope it helps
_
From: monim benayad [mailto:[EMAIL PROTECTED]
Sent: jeudi 31 janvier 2008 10:18
To: MalikSI
Cc: users@kannel.org
Subject: Re: Cannot
Hello,
Could you be more precise on the test environnement? Are you using mysql in
both? It could depend as well how you are coding your database request. If
you are asking for all the fields of each record or not Many things to
explain before we could advice if the issue is from kannel or
it is in the dlr feature of kannel if you want some examples of AT command.
regards
_
From: Alvaro Cornejo [mailto:[EMAIL PROTECTED]
Sent: mercredi 12 mars 2008 08:59
To: Raul Igrisan
Cc: users@kannel.org
Subject: Re: GSM DLR from GSM operator for MTs
As fas as I know, this is not
RTFM
go the user manual first please
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: vendredi 4 avril 2008 01:50
To: users@kannel.org
Subject: Query
Hello,
i have downloaded kannel gateway-1.4.1 for the application to
send SMS from PC to mobile phone. But
hello,
in which order did you start your different process ?
regards
_
From: Fourat ZOUARI [mailto:[EMAIL PROTECTED]
Sent: lundi 14 avril 2008 11:05
To: seik
Cc: users @ kannel. org
Subject: Re: Store's growing, smsbox doesnt seem to take MOs
Here's the configs:
group = core
Hello,
could you provide the following files, in order to see if something missing
:
include = /etc/kannel/bx-sms.conf
include = /etc/kannel/smsc.conf
include = /etc/kannel/routing-mo.conf
include = /etc/kannel/routing-mt.conf
include = /etc/kannel/db.conf
include =
Hi,
I tried to use the simple form web php script in /contrib/web
But I got the following error with the each
Sendsms
[?] From:
[?] To:
[?] Validity:
[?] Deferred:
Warning: Variable passed to each() is not
Try to take a look in /var/log/kannel/
Don't forget to make log rotate as well (it is well explained in the
userguide)
Hope it helps
-Original Message-
From: Michael Habashy [mailto:[EMAIL PROTECTED]
Sent: lundi 21 avril 2008 08:46
To: Kyriacos Sakkas
Cc: users@kannel.org
Subject: Re:
take a look in the dlr-url and dlr-mask parameter when you send a sms.
basically, you have to put you dlr-mask to 31 to have all the dlr (your
operator have to support as well), and all the dlr will be forward to the
url defined by dlr-url (must be url encoded)
hope it helps
_
Hello,
Does anyone got some experience on CDMA and Kannel ?
What about the CDMA samsung phone such as the U410 ? Is it working with
kannl ?
Regards
_
Antivirus avast! http://www.avast.com : message Sortant sain.
Base de donnees virale (VPS) : 080421-1, 21/04/2008
Analyse le :
Hello,
Does someone got any experience with CDMA phone and kannel such as :
Nokia 3105, Nokia 3125, Nokia 3152, Nokia 3155, Nokia 3155i, Nokia 3205,
Nokia 3585i, Nokia 3586, Nokia 3586i, Nokia 3587, Nokia 3587i, Nokia 6012,
Nokia 6015, Nokia 6015i, Nokia 6155, Nokia 6155i, Nokia 6225, 6235,
Hello,
I was posting a previous email on CDMA with Kannel but without answer.
After my research in the AT command, it looks not so difficult to do it. But
I need to have some support from the community to do the AT driver for CDMA.
Do someone is interested in such driver ?
Best regards
Hello,
I'm looking to receive binary sms and I would to forward them to an external
application web.
I'm using sms service but the content of the sms is not I was looking for :
2008-05-07 21:44:45 QueryString:
t=2008-05-07+19:44:34q=%2B123456789a=%3F(%A3%40%E9%24%40%40%40%40%40%40%40
service to the target web application.
Does someone got any idea ?
Regards
-Original Message-
From: info.ubichip [mailto:[EMAIL PROTECTED]
Sent: mercredi 7 mai 2008 13:18
To: users@kannel.org
Subject: Receive binary sms
Hello,
I'm looking to receive binary sms and I would to forward them
: info.ubichip [mailto:[EMAIL PROTECTED]
Sent: mercredi 7 mai 2008 16:25
To: users@kannel.org
Subject: RE: Receive binary sms
Hello all,
I forget to precise that the originator sms was in hex and it looks like the
folliwng line when I sent it with another modem application :
AT+CMGF=0;+CPMS=ME;+CSCS
sms]
Dear info.ubichip,
Your problem is in coding of the original message + urlencode or the
message.
So, use %s to tell you the coding of the message and %r to actually read the
content. Please note that the sequence you see
%3F(%A3%40%E9%24%40%40%40%40%40%40%40 is urlencoded
Hello,
I got some issue with the transmission of sms via kannel and sms service
feature. The original sms is in 7 bit but it is raw data (not ascii one).
When they arrive on kannel, I have the following log in the kannel.log
2008-05-10 09:29:40 [8869] [6] DEBUG: AT2[GSM0]: 1 messages waiting
it convert it otherwise it could not be pass correctly to the web server
(because of encoding type stuff).
But if it is a binary message, don't forget that the message is the data pdu
itself and not the orginal data.
hope it help..
_
From: Luis Augusto C. Sauerbronn [mailto:[EMAIL
Hello,
I got a strange behavior from kannel.
Here is the log from the bearerbox that show a message arrived :
2008-05-15 08:53:48 [26800] [6] DEBUG: AT2[GSM0]: --
07913366003000F0240B913366496236F9805051
80054080A01354005000704A200A0F0103134010D267B2985C3E
);
octstr_destroy(tmpstr);
return message;
-Original Message-
From: info.ubichip [mailto:[EMAIL PROTECTED]
Sent: jeudi 15 mai 2008 01:11
To: users@kannel.org
Subject: Strange msg data conversion in pdu : kannel bug ?
Hello,
I got a strange behavior from kannel.
Here is the log from
you could use the admin command, and stop the relative smsc
hope it helps
_
From: ACL [mailto:[EMAIL PROTECTED]
Sent: samedi 17 mai 2008 09:09
To: users@kannel.org
Subject: pause modem
We are 3 wavecom modems (eg. com1, com2 and com3) connected to kannel.
There are many pending
it is possible.
but you have to deal with the hotplug of linux
_
From: Philip Ankunda [mailto:[EMAIL PROTECTED]
Sent: samedi 31 mai 2008 05:38
To: Kannel User
Subject: USB Modem
Is it possible to connect a USB modem and configure it ok or is kannel
locked down to only serial
Hello all,
I got some particular script in php that are supposing to simulate a kannel
gateway. So when I sent a SMS, it answered 0: Accepted for delivery. I
would like my kannel gateway saw this script as another kannel gw. Right now
all the sms sent by my original gw are sent correctly (the php
yes, it is a good way to know the maximum capacity of your system
_
From: regme please [mailto:[EMAIL PROTECTED]
Sent: vendredi 13 juin 2008 09:36
To: users@kannel.org
Subject: Basic SMS tests
Hello all.
I'd like to make an all-local test system, that is with no real SMSC or
phone.
Hello,
I would like to achieve the following schema to send sms:
app --- kannel gw 1--- php code
I would like the php code is seen as another kannel gw by the kannel gw #1.
In the php code, I wrote some code answering 0: Accepted for delivery or
Sent. but the GW1 saw it as NACK and so make it
Thanks, it was helpfull.
it is working now,despite the dlr but it is for cdma and my other gw does
not support it.
_
From: Alvaro Cornejo [mailto:[EMAIL PROTECTED]
Sent: vendredi 13 juin 2008 16:26
To: info.ubichip
Cc: users@kannel.org
Subject: Re: Http relay issue with kannel
Hello,
I set up a small other application which deal with cdma, and I setup a
generic http sms that handle the link from this application to kannel.
regards
_
From: Alvaro Cornejo [mailto:[EMAIL PROTECTED]
Sent: lundi 16 juin 2008 07:00
To: info.ubichip; users@kannel.org
Subject
Hello,
Are you using DLR ? Are you using sim buffering ?
There is two others things to consider :
1/ the capacity of a modem to send thousand of sms = if it send, it got
less time to receive
2/ capacity of the network to make retry to your phone = some network does
not make several retry when
-
From: Falko Ziemann [mailto:[EMAIL PROTECTED]
Sent: mercredi 25 juin 2008 02:21
To: info.ubichip
Cc: users@kannel.org
Subject: Re: Deffered sending
Hi,
I don't know how this is done if you use a mobile as sending entity.
But if you use a smsc uplink via smpp, e.g., the message will be stored
Hello,
Is anyone know how to differ a send process in Kannel?
What is the meaning of the Send_sms table with sqlbox ?
thanks
Hello,
Take a look on the sqlbox and the table structure, it should answer your
question.
regards
-Original Message-
From: James Mubhoyi [mailto:[EMAIL PROTECTED]
Sent: vendredi 18 juillet 2008 12:41
To: users@kannel.org
Subject: Message ID
Hi,
I am fairly new to Kannel, and am
: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: vendredi 18 juillet 2008 23:05
To: info.ubichip; 'James Mubhoyi'; users@kannel.org
Subject: Re: Message ID
As far as I know there is no ID to relate mo and mt messages as they are
generated from different modules (mo-smsc and sendsms). I have looked
The best is to load balance on the application server.
AFAIK, kannel send the sms with the first sms service which match criteria
-Original Message-
From: sangprabv [mailto:[EMAIL PROTECTED]
Sent: lundi 21 juillet 2008 00:34
To: users@kannel.org
Subject: Load Balancing
Hi,
Is it
Hello All,
I send a sms from an external application with at command (which is 160
bytes long) :
+CMGR: STO UNSENT,+123456789,
132803041A042632080716001400010D046965636466686A
61230C030101
To: 'info.ubichip'; users@kannel.org
Subject: RE: PDU format
Hi
Try this online pdu ec¡ncoder/decoder
http://twit88.com/home/utility/sms-pdu-encode-decode
Regards
Alvaro
-Mensaje original-
De: info.ubichip [mailto:[EMAIL PROTECTED] Enviado el: Miércoles, 23 de
Julio de 2008 02:36
Para: users
For this, you should post in playsms forums.
for the credit, you have to write some code in playsms to do so.
regards
_
From: Cyprian Makhafola [mailto:[EMAIL PROTECTED]
Sent: jeudi 24 juillet 2008 14:44
To: users@kannel.org
Subject:
Hi
I am using kannel with playsms and it
1 - 100 of 215 matches
Mail list logo
