Oleg, Everything is OK with "14 Mpix" sensor; but when I connect the "5 Mpix" no picture is seen at all. I'm sure that there is no problem with cable(it works well with "14 Mpix" sensor ). The micro-SD card marked "5MPx" is also insert to the slot too. I put the log files below. And another question. I want to back up the micro-SD card but it dose not mount on any OS; how to can I do it?
*log files:* *The "Read AUX" output:* <board> <brand>Elphel</brand> <model>10389</model> <rev>B</rev> <serial>F80008</serial> <time>1603185256</time> <app>Eyesis4pi393</app> <mode>1001</mode> </board> *The "autocampars.log" :* root@elphel393:~# cat /var/log/autocampars.log 00014.09 autocampars: initializing state file /var/volatile/state/camera 00014.27 autocampars: Application - Eyesis4pi393, mode: 1001 00014.30 autocampars: Processing camera state: BOOT 00014.33 autocampars: Got sensor map from sysfs: 0: mt9p006, none, none, none 1: mt9p006, none, none, none 2: mt9p006, none, none, none 3: mt9p006, none, none, none 00014.35 autocampars: Active sensor ports: 0,1,2,3 master_port = 0 00014.38 autocampars: Sensors map read from the sysfs: [mt9p006, none, none, none],[mt9p006, none, none, none],[mt9p006, none, none, none],[mt9p006, none, none, none] 00014.41 autocampars: Parsed existing ini file 00014.43 autocampars: get_application_mode()->1013623 00014.46 autocampars: Parsed existing ini file 00014.49 autocampars: Detecting sensors for Eyesis4pi393 00014.51 autocampars: Got --init command, initialization was not completed, just continue 00014.54 autocampars: detect_camera() 00014.56 autocampars: detect_camera(): 0: mt9p006, none, none, none 1: mt9p006, none, none, none 2: mt9p006, none, none, none 3: mt9p006, none, none, none 00014.59 autocampars: ports:0, 1, 2, 3 00014.62 autocampars: boot 00014.64 autocampars: Parsed existing ini file 00014.67 autocampars: Using sensor mask 0xf7777 00016.95 autocampars: Setting sensors/multiplexers power 00016.98 autocampars: set_eyesis_power_control()=>Array ( [result] => OK [retval] => 0 ) 00017.00 autocampars: GLOBALS['camera_state_arr']=>Array ( [exit_stage] => [state] => BOOT [rev10389] => B [application] => Eyesis4pi393 [mode] => 1001 [max_frame_time] => 300000 [is_slave] => 1 [eyesis_top] => 1 [is_eyesis] => 1 [eyesis_power] => 1 [max_latency] => 5 ) 00017.03 autocampars: Current state: BOOT 00017.06 autocampars: This is a slave camera - waiting for master to contol next steps 00017.08 autocampars: Log file saved as /var/log/autocampars.log 00017.11 autocampars: ---------------------------------------------- root@elphel393:~# On Mon, Oct 19, 2020 at 10:18 PM Oleg <support-list@support.elphel.com> wrote: > Ali, > > 1. Please send the /var/log/autocampars.log. It can help to rule out a > possible misconfiguration. If everything is correct then one can assume > it's a bad cable. > > 2. (just want to double check your configuration) Go > http://community.elphel.com/bootblock393/, make sure the ip address in > the 1st table is correct, then click "Read AUX" in the "AUX board > (10389)"-table - what's the output? > > Regards, > Oleg > > On Mon, Oct 19, 2020 at 9:21 AM Elphel Support < > support-list@support.elphel.com> wrote: > >> Hello Ali, >> >> There should be no problems with impedance matching, we tested both types >> of sensors with up to 450mm cables (for ectremely long cable programmatic >> phase adjustment may be needed). And the cables are the same for both >> serial (14MPix) and parallel (5MPix). >> >> Andrey >> >> >> ---- On Mon, 19 Oct 2020 05:33:14 -0600 *ali tamimi >> <tamimial...@gmail.com <tamimial...@gmail.com>>* wrote ---- >> >> Hello Oleg >> yes, i can 'ssh' to camera and also can send >> the/var/log/autocampars.log. The microSD card marked "5MPx" is also insert >> to the slot. >> We opened the camera. When closing the sensor cable was pressed slightly >> and deformed. I guess the cable is damaged. In the parts list of the "5 >> MPx" sensor, FFC cable with model number 050-30-51B, is provided. But by >> connecting this cable, the sensor is not detected eaither.The connection >> photo is sent in the attachment. Could there be a problem with the cable >> (for example, impedance matching, etc.)? >> >> On Sun, Oct 18, 2020 at 11:23 AM Oleg <support-list@support.elphel.com> >> wrote: >> >> Hello Ali, >> >> Can you 'ssh' to the camera? Could you send the /var/log/autocampars.log? >> >> ~$ ssh root@192.168.0.9 <http://mailto:root@192.168.0.9> >> ~# cat /var/log/autocampars.log >> >> >> Or if you use minicom - send the boot log. >> >> If I remember right you should have a microSD card marked a "5MPx" - the >> camera autoboots from the card - I suggest you try the card first. And the >> only thing you will need is to set "MT9*P*006" from the bootblock393 >> page. >> >> Regards, >> Oleg >> >> On Sun, Oct 18, 2020 at 7:56 AM ali tamimi <tamimial...@gmail.com> wrote: >> >> Hello >> We have provided your product 10393. Your camera is very well designed >> and made. Thank you for your good products and complete documentation >> and your support. >> Sensor installed on 10393 is a 14-megapixel sensor (10398) "mt9f002" by >> default that Works well. We also bought the 10338 "mt9006" sensor. By >> replacing the sensors, the new one is not detectable and no image is seen >> . >> We downloaded the latest firmware, although the default sensor is >> "mt9006" in the manual, the "devicetree.dtb" replacement process was >> performed according to the instructions,10393 nand flash was programmed >> but the sensor is not detected again.The image of error in web interface >> sent in the attachment. Thanks for your support in solving the problem. >> _______________________________________________ >> Support-list mailing list >> Support-list@support.elphel.com >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> >> >> _______________________________________________ >> Support-list mailing list >> Support-list@support.elphel.com >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> >> >> >> _______________________________________________ >> Support-list mailing list >> Support-list@support.elphel.com >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> > > > -- > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124 > Elphel, Inc. >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com