Please respond to biofuel@yahoogroups.com
To: biofuel@yahoogroups.com
cc: (bcc: Joseph Martelle/US/GM/GMC)
Subject: Re: [biofuel] Lucas diesel pumps
<snip>
>2) Have you tried preheating the biodiesel, even a simple glycol coolant
>heat exchanger might elevate the temp. of the biodiesel and reduce its
>viscosity
Please don't use copper for fuel lines. Copper work hardens and will quickly
crack from vibration. I'd hate to see anyone torch their vehicle from leaking
copper fuel lines. :-< Joe
>Even something as simple as a fuel line of copper wound around a section of
>upper rad hose ,and insulated, might do it.
>Perhaps the Peugeot already has a fuel preheater, but even so, it might be
>worth trying another just to thin the bio out a bit, after you have
>confirmed that it is bio from a virtually complete conversion.
>3) Run a blend is always an option. B20, or B50.
---
Ed B.
www.biofuels.ca
Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html
Please do NOT send "unsubscribe" messages to the list address.
To unsubscribe, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/