Here's a video, not sure what the blinking means? https://www.youtube.com/watch?v=dME8A-H_590
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Nov 28, 2014 at 8:39 PM, Josh Luthman via Af <[email protected]> wrote: > *rb2011 with ports 2/3/4/5 set to hardware switch (ether2 master, 3/4/5 > slave). Ports 6/7/8/9 are hardware switch (ether6 master, 7/8/9 slave). > *From the rb2011 it goes to the Ethernet half of the SyncInjector. > *From the POE half of the SyncInjector it goes to WB gigeapc HV surge > suppressors and then to the ePMP radios. > > Two of the ePMP radios are powered up and running gige. Neither are > receiving CMM sync (top of the ePMP says "Not receiving GPS sync"). The > remaining 6 APs aren't even powering up/linking up. Any ideas before I > start swapping parts? Is it OK to have the surge between SyncInjectors and > ePMP? > > On top of all of this the SiteMonitor isn't talking to the POE injector or > the two Gig SyncInjectors. I have them all daisy chained and verified > they're snapped in place. The POE injector is powering Ubnt radios just > fine. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 >
