It says 24v/1a and is gigabit. It is a bit different than the Nanobeam POEs. It also doesn't work with an NSM5 for certain.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Apr 16, 2015 at 6:39 PM, George Skorup (Cyber Broadcasting) < [email protected]> wrote: > What does the AF5x power supply say on the label for pairs or pinouts? Or > is it the same as their other 24V/1A supplies, but gigabit? > > On 4/16/2015 5:29 PM, Josh Luthman wrote: > > I'm mostly concerned with the Ubnt Airmax stuff (24v) and AF5x. Obviously > the ePMP works. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Thu, Apr 16, 2015 at 6:12 PM, George Skorup (Cyber Broadcasting) < > [email protected]> wrote: > >> AFAIK, the 450AP GigE interface is still powered only on pins 4, 5, 7 & >> 8. Probably applies to the ePMP Sync radio too. >> >> So, with that in mind.. does the UBNT GigE PoE stuff use all 4 pairs for >> power? If it's 4, 5, 7 & 8, it may be possible, but... you'd have to flip >> the blues and browns at one end. I don't know what that would do for the >> GigE data interface though. It might not work. You can use a 568B to 568A >> (aka standard cross-over) cable and GigE still works fine, but I'm not sure >> about crossed blues and browns. >> >> Someone smarter than me would probably have to give you a thumbs up or >> down. >> >> >> On 4/16/2015 4:55 PM, Josh Luthman wrote: >> >>> Has anyone tried these syncinjectors for Ubnt Airmax radios? What about >>> anything else? I'd love to use this one product for all sites from now on. >>> >>> Is it possible to run the AF5x? >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >> >> > >
