No pinout!?
On 4/16/2015 6:10 PM, Josh Luthman wrote:
It says 24v/1a and is gigabit. It is a bit different than the
Nanobeam POEs. It also doesn't work with an NSM5 for certain.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Apr 16, 2015 at 6:39 PM, George Skorup (Cyber Broadcasting)
<geo...@cbcast.com <mailto:geo...@cbcast.com>> wrote:
What does the AF5x power supply say on the label for pairs or
pinouts? Or is it the same as their other 24V/1A supplies, but
gigabit?
On 4/16/2015 5:29 PM, Josh Luthman wrote:
I'm mostly concerned with the Ubnt Airmax stuff (24v) and AF5x.
Obviously the ePMP works.
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Apr 16, 2015 at 6:12 PM, George Skorup (Cyber
Broadcasting) <geo...@cbcast.com <mailto:geo...@cbcast.com>> wrote:
AFAIK, the 450AP GigE interface is still powered only on pins
4, 5, 7 & 8. Probably applies to the ePMP Sync radio too.
So, with that in mind.. does the UBNT GigE PoE stuff use all
4 pairs for power? If it's 4, 5, 7 & 8, it may be possible,
but... you'd have to flip the blues and browns at one end. I
don't know what that would do for the GigE data interface
though. It might not work. You can use a 568B to 568A (aka
standard cross-over) cable and GigE still works fine, but I'm
not sure about crossed blues and browns.
Someone smarter than me would probably have to give you a
thumbs up or down.
On 4/16/2015 4:55 PM, Josh Luthman wrote:
Has anyone tried these syncinjectors for Ubnt Airmax
radios? What about anything else? I'd love to use this
one product for all sites from now on.
Is it possible to run the AF5x?
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373