We are talking about the PMP450 AP. Not the 450i AP. Not any SM. The "PMP450 AP"
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Aug 16, 2016 at 2:11 PM, Christopher Tyler <ch...@totalhighspeed.net > wrote: > No, the 450i AP uses normal PoE. The SM/CPE requires a pin swap. > > "Access point is now 802.3at compatible and includes an AUX port, while > the Subscriber can re-use the 30 VDC power supplies common to the PMP 100 > platform" > > -- > Christopher Tyler > MTCRE/MTCNA/MTCTCE/MTCWE > Total Highspeed Internet Services > 417.851.1107 > > ----- Original Message ----- > From: "Josh Luthman" <j...@imaginenetworksllc.com> > To: af@afmug.com > Sent: Tuesday, August 16, 2016 1:05:36 PM > Subject: Re: [AFMUG] PMP450i 900mhz and Netonix > > 450, not 450i > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Aug 16, 2016 at 2:01 PM, Christopher Tyler < > ch...@totalhighspeed.net > > wrote: > > > The 450i AP's use standard PoE. It's not reversed. > > > > -- > > Christopher Tyler > > MTCRE/MTCNA/MTCTCE/MTCWE > > Total Highspeed Internet Services > > 417.851.1107 > > > > ----- Original Message ----- > > From: "Josh Luthman" <j...@imaginenetworksllc.com> > > To: af@afmug.com > > Sent: Tuesday, August 16, 2016 1:00:48 PM > > Subject: Re: [AFMUG] PMP450i 900mhz and Netonix > > > > Change the pinout I believe. > > > > > > Josh Luthman > > Office: 937-552-2340 > > Direct: 937-552-2343 > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > On Tue, Aug 16, 2016 at 1:59 PM, Kurt Fankhauser < > lists.wavel...@gmail.com > > > > > wrote: > > > > > how do you do gigabit with the 24v polarity needing reversed? > > > > > > On Tue, Aug 16, 2016 at 1:57 PM, Josh Luthman < > > j...@imaginenetworksllc.com > > > > wrote: > > > > > >> 24v and 48v but Netonix does both > > >> > > >> > > >> Josh Luthman > > >> Office: 937-552-2340 > > >> Direct: 937-552-2343 > > >> 1100 Wayne St > > >> Suite 1337 > > >> Troy, OH 45373 > > >> > > >> On Tue, Aug 16, 2016 at 1:48 PM, Kurt Fankhauser < > > >> lists.wavel...@gmail.com> wrote: > > >> > > >>> pmp450 and pmp450i have different poe voltages > > >>> > > >>> On Tue, Aug 16, 2016 at 1:31 PM, Craig House < > cr...@totalhighspeed.net > > > > > >>> wrote: > > >>> > > >>>> It will work we're using it in many places > > >>>> > > >>>> Sent from my iPhone > > >>>> > > >>>> On Aug 16, 2016, at 12:30, Bill Prince <part15...@gmail.com> wrote: > > >>>> > > >>>> It will probably power it, but it won't provide sync. > > >>>> > > >>>> > > >>>> bp > > >>>> <part15sbs{at}gmail{dot}com> > > >>>> > > >>>> > > >>>> On 8/16/2016 10:18 AM, Darin Steffl wrote: > > >>>> > > >>>> Hello all, > > >>>> > > >>>> Will a Netonix 48V switch power the PMP450i 900mhz? > > >>>> > > >>>> I'm leaning towards that it will NOT due to needing 48-56V and > 802.3at > > >>>> PoE which I don't think Netonix supports. > > >>>> > > >>>> Can anyone confirm my thoughts or tell me I'm wrong and it will > work? > > >>>> > > >>>> Thanks > > >>>> > > >>>> -- > > >>>> Darin Steffl > > >>>> Minnesota WiFi > > >>>> www.mnwifi.com > > >>>> 507-634-WiFi > > >>>> <http://www.facebook.com/minnesotawifi> Like us on Facebook > > >>>> <http://www.facebook.com/minnesotawifi> > > >>>> > > >>>> > > >>>> > > >>> > > >> > > > > > >