Sorry got a bit confused with the 450/450i discussion.Josh is correct, the 450 AP is reversed the 450i AP is not.
-- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 ----- Original Message ----- From: "Christopher Tyler" <ch...@totalhighspeed.net> To: af@afmug.com Sent: Tuesday, August 16, 2016 1:11:11 PM Subject: Re: [AFMUG] PMP450i 900mhz and Netonix No, the 450i AP uses normal PoE. The SM/CPE requires a pin swap. "Access point is now 802.3at compatible and includes an AUX port, while the Subscriber can re-use the 30 VDC power supplies common to the PMP 100 platform" -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 ----- Original Message ----- From: "Josh Luthman" <j...@imaginenetworksllc.com> To: af@afmug.com Sent: Tuesday, August 16, 2016 1:05:36 PM Subject: Re: [AFMUG] PMP450i 900mhz and Netonix 450, not 450i Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Aug 16, 2016 at 2:01 PM, Christopher Tyler <ch...@totalhighspeed.net > wrote: > The 450i AP's use standard PoE. It's not reversed. > > -- > Christopher Tyler > MTCRE/MTCNA/MTCTCE/MTCWE > Total Highspeed Internet Services > 417.851.1107 > > ----- Original Message ----- > From: "Josh Luthman" <j...@imaginenetworksllc.com> > To: af@afmug.com > Sent: Tuesday, August 16, 2016 1:00:48 PM > Subject: Re: [AFMUG] PMP450i 900mhz and Netonix > > Change the pinout I believe. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Aug 16, 2016 at 1:59 PM, Kurt Fankhauser <lists.wavel...@gmail.com > > > wrote: > > > how do you do gigabit with the 24v polarity needing reversed? > > > > On Tue, Aug 16, 2016 at 1:57 PM, Josh Luthman < > j...@imaginenetworksllc.com > > > wrote: > > > >> 24v and 48v but Netonix does both > >> > >> > >> Josh Luthman > >> Office: 937-552-2340 > >> Direct: 937-552-2343 > >> 1100 Wayne St > >> Suite 1337 > >> Troy, OH 45373 > >> > >> On Tue, Aug 16, 2016 at 1:48 PM, Kurt Fankhauser < > >> lists.wavel...@gmail.com> wrote: > >> > >>> pmp450 and pmp450i have different poe voltages > >>> > >>> On Tue, Aug 16, 2016 at 1:31 PM, Craig House <cr...@totalhighspeed.net > > > >>> wrote: > >>> > >>>> It will work we're using it in many places > >>>> > >>>> Sent from my iPhone > >>>> > >>>> On Aug 16, 2016, at 12:30, Bill Prince <part15...@gmail.com> wrote: > >>>> > >>>> It will probably power it, but it won't provide sync. > >>>> > >>>> > >>>> bp > >>>> <part15sbs{at}gmail{dot}com> > >>>> > >>>> > >>>> On 8/16/2016 10:18 AM, Darin Steffl wrote: > >>>> > >>>> Hello all, > >>>> > >>>> Will a Netonix 48V switch power the PMP450i 900mhz? > >>>> > >>>> I'm leaning towards that it will NOT due to needing 48-56V and 802.3at > >>>> PoE which I don't think Netonix supports. > >>>> > >>>> Can anyone confirm my thoughts or tell me I'm wrong and it will work? > >>>> > >>>> Thanks > >>>> > >>>> -- > >>>> Darin Steffl > >>>> Minnesota WiFi > >>>> www.mnwifi.com > >>>> 507-634-WiFi > >>>> <http://www.facebook.com/minnesotawifi> Like us on Facebook > >>>> <http://www.facebook.com/minnesotawifi> > >>>> > >>>> > >>>> > >>> > >> > > >