i have a site with Air Fiber 5x running the same 50mhx channel on 3 different backhauls with no problems of self interference using the 3 different sync soruces...
Sent from my iPhone Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 > On Aug 16, 2016, at 5:23 PM, Josh Luthman <[email protected]> wrote: > > It's proper to have one sync source at the site anyway. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > >> On Aug 16, 2016 5:14 PM, "Kurt Fankhauser" <[email protected]> wrote: >> it would be better if it (450i) had on-board sync so i can power the whole >> tower with one Netonix Switch and be done, but no i gotta mess around with a >> CTM2 or Packet Flux Sync Injector now to get timing on 450i >> >>> On Tue, Aug 16, 2016 at 3:23 PM, George Skorup <[email protected]> wrote: >>> As others have said, you obviously won't get sync from the Netonix. Plug >>> the 450i *AP* in and go. It is 802.3at compliant, but it will also take >>> passive injected power without issue. And you don't need to change any >>> wires around. It will take either polarity on any pair. Cambium actually >>> did this right. Woulda been even better if they designed for 20-60vdc, but >>> I guess you can never have it all. >>> >>> Out of the 450i series, the only radio that is not 802.3at is the 900 SM >>> which is the old Canopy 29.5v like FSK and regular 450. >>> >>>> On 8/16/2016 12:18 PM, Darin Steffl wrote: >>>> Hello all, >>>> >>>> Will a Netonix 48V switch power the PMP450i 900mhz? >>>> >>>> I'm leaning towards that it will NOT due to needing 48-56V and 802.3at PoE >>>> which I don't think Netonix supports. >>>> >>>> Can anyone confirm my thoughts or tell me I'm wrong and it will work? >>>> >>>> Thanks >>>> >>>> -- >>>> Darin Steffl >>>> Minnesota WiFi >>>> www.mnwifi.com >>>> 507-634-WiFi >>>> Like us on Facebook
