ew, I don't have a regular charger. Any chance you have one I could borrow from you tomorrow (Im down in MTV).
W On Thu, Dec 4, 2014 at 9:38 PM, Casey Barker <ca...@barkerzone.com> wrote: > Hi Winton, > > Not sure if this is the issue or not, but I've several times had LiPos > fall below the minimum voltage needed to satisfy the charge circuit. > Usually, you just need to "jump start" it, either with a "real" lipo > charger, or a current-limited bench supply, or even just a big resistor > and another 3.7V lipo cell. Once there's enough charge in the cell, the > regular charge circuit will work again. > > Casey > > > > On Thu Dec 04 2014 at 9:22:44 PM Winton H. E. Davies < > wdav...@cs.stanford.edu> wrote: > >> Hi, I haven't used my Altusmetrum for a year or so. Battery seems >> completely flat. When I connect to the USB cable no LEDs come on, unless I >> press the on-switch, at which point I get a red and yellow flashing at the >> same time and a constant be-be-be-be-be-be-be-be-be -- Any ideas? Scared it >> might have died!! Have a launch Saturday morning! >> >> Winton >> >> (also copied to Facebook). >> _______________________________________________ >> altusmetrum mailing list >> altusmetrum@lists.gag.com >> http://lists.gag.com/mailman/listinfo/altusmetrum >> > > _______________________________________________ > altusmetrum mailing list > altusmetrum@lists.gag.com > http://lists.gag.com/mailman/listinfo/altusmetrum > >
_______________________________________________ altusmetrum mailing list altusmetrum@lists.gag.com http://lists.gag.com/mailman/listinfo/altusmetrum