Elliott, I think it's publicly available. Aastra promotes this as a powerful feature of their phones, I assume Polycom has to do the same.
I found this link on the Polycom site. There's a reference to sample applications. I think that's where I would start. I looked at one of the docs and this looks like it's a bit more involved than the Aastra approach. They seem to actually deploy java applets to the phone which are then consumed by the Microbrowser. That seems a bit heavy to me but I only looked at it for 30 seconds. http://www.polycom.com/usa/en/support/voice/soundpoint_ip/soundpoint_ip501.html#document Take a look, it might do what you want. Good luck, Dave On Fri, Oct 31, 2008 at 4:34 PM, Elliott Jeyaseelan <[EMAIL PROTECTED]> wrote: > Dave, > > Very interesting. > > I would love to check out the api's assuming they are publicly > available, somehow doubt that. > > Thanks for sharing this. > > Elliott > >> -----Original Message----- >> From: Dave Donovan [mailto:[EMAIL PROTECTED] >> Sent: Friday, October 31, 2008 3:34 PM >> To: Toronto Asterisk UG >> Subject: Re: [on-asterisk] Polycom 3.1 firmware pop-up >> notification on phones display >> >> Hi Elliott, >> >> This isn't exactly what you asked for but I think the Polycom >> supports an API. >> >> This presentation doesn't contain technical details but it's >> a good overview of the capabilities. >> >> http://www.voipevent.eu/pdf/voipevent2008_eindhoven/Polycom%20 >> IP%20Handset%20Applications%20Overview.pdf >> >> I'm sure there's detailed API documentation available somewhere. >> >> Dave >> >> On Fri, Oct 31, 2008 at 12:24 PM, Elliott Jeyaseelan >> <[EMAIL PROTECTED]> wrote: >> > Hi Simon, >> > >> > Thanks for getting back. >> > >> > I am going to try that from sipsak.... >> > >> > Could this be somehow sent via AMI also using perl or php? >> > >> > Elliott >> > >> > >> > >> >> -----Original Message----- >> >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of >> >> Simon P. Ditner >> >> Sent: Thursday, October 30, 2008 10:40 PM >> >> To: Elliott Jeyaseelan >> >> Cc: Toronto Asterisk UG >> >> Subject: Re: [on-asterisk] Polycom 3.1 firmware pop-up >> notification >> >> on phones display >> >> >> >> I would likely use "sipsak", which is a command line tool for >> >> crafting sip messages. It says in that PDF that only warning codes >> >> 300 to 399 are supported. >> >> 399 is the generic warning parameter (see the SIP RFC3261, section >> >> 20.43 on 'Warning'), so it would likely go something like this (I >> >> have not tried it yet): >> >> >> >> sip endpoint: [EMAIL PROTECTED]:5060 >> >> sip endpoint password: abc123 >> >> sip server: 192.168.0.20:5060 >> >> >> >> 192.168.0.100 >> >> >> >> ---- >> >> echo 'NOTIFY sip:[EMAIL PROTECTED]:5060 SIP/2.0 >> >> >> >> Via: SIP/2.0/UDP 192.168.0.20 >> >> From: <sip:[EMAIL PROTECTED]> >> >> To: <sip:[EMAIL PROTECTED]> >> >> Warning: 399 192.168.0.20 "The sky is falling" >> >> Date: blah >> >> Call-ID: [EMAIL PROTECTED] >> >> CSeq: 1300 NOTIFY >> >> Contact: <sip:[EMAIL PROTECTED]> >> >> Content-Length: 0 >> >> ' | sipsak -v -f - -s sip:[EMAIL PROTECTED]:5060 -G -a abc123 >> >> ---- >> >> >> >> On Thu, Oct 30, 2008 at 12:04 PM, Elliott Jeyaseelan >> <[EMAIL PROTECTED]> >> >> wrote: >> >> > Anyone? >> >> > >> >> >> -----Original Message----- >> >> >> From: Elliott Jeyaseelan [mailto:[EMAIL PROTECTED] >> >> >> Sent: Sunday, October 26, 2008 2:07 PM >> >> >> To: Toronto Asterisk UG >> >> >> Subject: [on-asterisk] Polycom 3.1 firmware pop-up >> notification on >> >> >> phones display >> >> >> >> >> >> Hi, >> >> >> >> >> >> I was going thru the new 3.1 series of polycom firmware for the >> >> >> soundpoint series IP phones, (301/501/550 etc) and on >> page 4-72 of >> >> >> the Sip 3.1 administrators guide, there is a very short >> >> blurp about >> >> >> how to display a 3 second notification on the polycom >> >> phone's display >> >> >> via sip header. >> >> >> >> >> >> Has any tried this or have a clue on how to do this from >> >> asterisk 1.4? >> >> >> >> >> >> The pdf can be viewed from the following link if anyone is >> >> interested >> >> >> in checking this out, I would be very interested to know >> >> how to put >> >> >> up a server generated message on the phones display sent from >> >> >> asterisk either triggered by an event, time or other: >> >> >> >> >> >> http://www.polycom.com/common/documents/support/setup_maintena >> >> >> nce/produc >> >> >> ts/voice/spip_ssip_Admin_Guide_SIP_3_1.pdf >> >> >> >> >> >> Thanks for any suggestions or ideas. >> >> >> >> >> >> Elliott >> >> >> >> >> >> >> >> >> --------------------------------------------------------------------- >> >> >> To unsubscribe, e-mail: [EMAIL PROTECTED] For >> additional >> >> >> commands, e-mail: [EMAIL PROTECTED] >> >> >> >> >> >> >> >> >> >> >> > >> >> > >> >> >> --------------------------------------------------------------------- >> >> > To unsubscribe, e-mail: [EMAIL PROTECTED] For >> additional >> >> > commands, e-mail: [EMAIL PROTECTED] >> >> > >> >> > >> >> >> >> >> >> >> >> -- >> >> | It ain't what you don't know that gets you into trouble. >> It's what >> >> | you know for sure that just ain't so. -- Mark Twain >> >> | >> >> | The Toronto Asterisk Users Group >> >> | Join the discussion group by visiting http://taug.ca >> >> >> >> >> > >> > >> --------------------------------------------------------------------- >> > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional >> > commands, e-mail: [EMAIL PROTECTED] >> > >> > >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] For >> additional commands, e-mail: [EMAIL PROTECTED] >> >> >> > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
