From: Darrick Hartman <[EMAIL PROTECTED]> - 2008-05-13 14:40 >Mart,
>Try one of the older images on my site. I'll be uploading a new image >later today. We made some changes in the initrd which may be causing >some of the problems you're seeing. >Not sure why it's been so quiet around here lately. >When I build the new images, I'll do both the via-serial and non-serial >versions. >Darrick Hi Darrick I tried the 1625 VIA serial image and it gets further than the 1725 one. It seems to verify and start the bootstrap of the Astlinux/Linux image. However it then runs into USB initialisation and locks me out of the console. I am unable therefore to change the files in the OS directory (for example to try the 1703 image) as I have no command prompt. What I see on the final screen (this is build 1625) is: "Uncompressing Linux... Ok, booting the kernel.d00 usb usb2: configuration #1 chosen from 1 choice" It then goes through a sequence of assigning USB bus numbers 3,4 and 5 before outputting the line : "USB Mass Storage support registered." This is on the final line of the screen, there is no command prompt and the cursor is flashing at the start of the second line. Note that the machine is not totally locked up as the Num and Caps lock still toggle the keyboard lights on. Q1. Is there a way to get past this stage of the processing so that 1625 can complete boot up? Q2. Is there a way to interrupt the boot up so that I can get control of the console and change the Astlinux files - otherwise I will need to reinstall Runnix. Many thanks Mart ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
