>>>>> On Tue, 1 Aug 2017 16:58:33 -0400, Phil Stracchino said: > > Sorry for the length. This is a complete log history from starting the > SD (with a tape already loaded) and the director, starting a BAT, doing > a STATUS STORAGE, then an UMOUNT STORAGE=babylon5-sd, all at -d 200. > > > Summary: > > When the STATUS STORAGE is issued, the Director talks to the SD, the SD > replies, the Director posts the results. All perfectly normal. > > When the UMOUNT STORAGE is issued, the director sends the unmount command: > > minbar-dir: ua_status.c:552-0 Connected to storage daemon > minbar-dir: ua_cmds.c:1731-0 unmount: umount storage=babylon5-sd > minbar-dir: job.c:1788-0 wstore=babylon5-sd where=unknown source > > The SD receives *nothing*, does *nothing*, and logs *nothing*. It > appears the SD does not receive either mount or umount commands. > Status, however, works, as do reads and writes. I haven't tested LABEL.
Does it work if you pass slot=0 in the command? umount storage=babylon5-sd slot=0 __Martin ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Bacula-devel mailing list Bacula-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-devel
