Hello,

I guess I am making the flat side of the TMP36 sensor face left on the left 
side, i.e. the flat face is facing away from the BBB when I add the leads.

Seth

On Friday, August 11, 2017 at 3:00:38 PM UTC-5, Mala Dies wrote:
>
> Hello,
>
> Look at this photo in .jpeg format. 
>
>
>
> <https://lh3.googleusercontent.com/-Hp4z5F5f99Q/WY4MODl2vCI/AAAAAAAAJ1A/CmcRfoKVu3kfqHPIsLOUqlkS41l0fbWzACLcBGAs/s1600/forBBBTMP.JPG>
>
>
>
> I would assume the left most *pin* on the TMP36 temp. sensor when facing 
> left, away from the board on the left side of the board, would be *Pin 3*, 
> right?
>
>
> Seth
>
>
> P.S. If you have time, please review the photo and get back to me. I have 
> made mistakes before but I think I am correct. 
> http://www.analog.com/media/en/technical-documentation/data-sheets/TMP35_36_37.pdf.
>  
>  
>
>
>
>
>
> On Thursday, August 10, 2017 at 11:26:24 PM UTC-5, Dennis Lee Bieber wrote:
>>
>> On Thu, 10 Aug 2017 08:55:20 -0700 (PDT), Mala Dies 
>> <fun...@gmail.com> declaimed the following: 
>>
>>
>> >I am going over the book, "Programming the BeagleBone Black," (Monk 
>> 2014) 
>> >and I found on page 110 a TMP36 software example with relating a P9 
>> Header 
>> >layout/diagram. I think I am connecting things correctly. I have done 
>> this 
>> >example before but currently I am having trouble with the 2GB BBB and 
>> >Debian Stretch. 
>>
>>         I suggest you look more closely then at the orientation of the 
>> TMP36 in 
>> that diagram. 
>>
>>         The flat side is to the left 
>>                         |) 
>> which means Pin 1 is at the top of the diagram. 
>> -- 
>>         Wulfraed                 Dennis Lee Bieber         AF6VN 
>>     wlf...@ix.netcom.com    HTTP://wlfraed.home.netcom.com/ 
>>
>>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/372f5fce-214e-4960-af1d-f215db8c0658%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to