Hello Mr. Dennis, Seth here. I do not believe this stuff. The item I was viewing was from the underneath view/bottom view. Silly! I read that many times and it never clicked. Thank you. I feel completely inadequate to post after this screw up but I will again.
Seth P.S. Thank you again for your support. Oh and I was using AIN1/P9_40 for this software instead of P9_39. I did not want to plagiarize the OpenSource info. On Friday, August 11, 2017 at 8:57:22 PM UTC-5, Dennis Lee Bieber wrote: > > On Fri, 11 Aug 2017 13:11:42 -0700 (PDT), Mala Dies > <[email protected] <javascript:>> declaimed the following: > > >One Last Thing, > > > >Look at this photo. This may give some better insight. > > > >Seth > > > >< > https://lh3.googleusercontent.com/-sHCAzYIH8rE/WY4PeE8xU9I/AAAAAAAAJ1M/rvUGFGcMU6I6PQQGmoOOKyHcOCW9EjOfQCLcBGAs/s1600/BBBTMP36.JPG> > > > > Well, based on /this/ photo -- the breadboard appears to be wired > correctly. > > Pin 1 is in B4/Green E4 > Pin 2 is in B5/Orange D5 > Pin 3 is in B6/Blue E6 > > In the Monk book, the data pin is in the fourth socket up from the > outer bottom -- but based on the highlights, your Orange is only three > sockets up. > > In the book, GND is then three up and one right from the data > line. > Your Blue appears to be four up and one right. > > Monk has V+ in the second socket down from the outer top; I can't > identify which socket your Green is plugged into. > -- > Wulfraed Dennis Lee Bieber AF6VN > [email protected] <javascript:> HTTP://wlfraed.home.netcom.com/ > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0c130c73-5702-44e8-a014-9cd9f3689878%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
