a classic should have a CF card with NK.bin on it in the CF card slot, i.e. the one at the back, not the PCMCIA slot with an adapter. An mPower should have an SD card formatted to FAT16 in the SD card slot, with NK.bin on it. A classic NK.bin is about 25megs and an mPower NK.bin is about 40 megs.
hold down dots 4,5 and press and release the reset button. You should hear different tones to the normal reset beep - this means you're in the bootloader and that something is about to happen. You need the power connected during this (this is because if the battery ran out during the upgrade process it would be very bad for all concerned!). let me know if any of that helps, regards Andy. ---- Andrew Riden Software Development Engineer HumanWare Ltd. 11 Mary Muller Drive, Christchurch, New Zealand. DDI +64 3 940 2264 Fax +64 3 384 4933 Email: [EMAIL PROTECTED] Internet: www.humanware.com ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
