Check two things first then suspect the controller. First check the 2 black wires going from the controller to the brew boiler (temp probes) for a short. Next water sitting in the boilers could have built up scale. Descale machine.Ira is very knowledgeable in this area. See if he adds anything.
On Mon, Jan 19, 2009 at 11:16 AM, BinBakinBeans <[email protected]>wrote: > > > > Just adding some further info. I tried upping my offset from 7 and my > group head temp goes up - as does my hot water wand temp. > I now have the offset up to 18 and my group head water temp went up > from 81 degrees to 90 degrees. My hot water wand temp went from about > 84 degrees to 93 degrees. Thar seems to be about as high as it will go > temp wise. Any ideas? Seems strange that hot water wand temp goes up > as well. > I called WLL tech support and spoke to a woman who answered the phone > and she wasn't really any help. She was stumped and would like me to > just send it in. I REALLY don't want to do that as their turn around > right now is at least 4 weeks. > The machine seemed to be working fine before I let it sit for 3 > months. Could letting it sit somehow have caused a problem? > I should also add that I have always used filtered water (less than 50 > ppm TDS) and use my hot water wand often to heat up my cups. > Help! My wife is getting real crabby too without her morning latte. > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
