Hi Jan, Finally I am back and here is the link: http://www.systermann.de/portfolio/4.-brewtus-iii-isoliert-u.-kessel-schaltbar
This shows the best insulation you can have and a on/off switch for the steam boiler. and: http://www.systermann.de/portfolio/7.-brewtus-iii-tank-u.-festwasser-umschaltbar This shows an improved water connection - this helps to reduce the water coming out of the valve during shot production. The insulation problem is exactly like with my new Brewtus... I am in contact with the seller as well and he is with Expobar - I will get an update tomorrow. Best regards Sven On 5 Jul., 17:40, misterpoutine <[email protected]> wrote: > Hi Sven... > > My boilers are not rusty, although when I first posted this, the > machine was only a month and 1/2 old....it's been almost 3 months, and > no rust so far, but a melted insulation. > If you take a look onhttp://groups.google.com/group/brewtus/files, > you should see my 3 pictures, numbers 6084-6085 and 6088.... If you > need to upload pictures, just click on the upper left section where > you see the: +UPLOAD > > By the way, I didn't get the link to: pimp my Brewtus > > Jan > > On Jul 4, 10:35 am, Stogie <[email protected]> wrote: > > > > > Hi, > > > I have purchased a Brewtus 3 about the same time ago from the only > > German importer after a long lead time... The Spanish factory seems a > > little stressed... It is definitely the latest model but in my case > > the PID is still/again red. I heard these changes in model > > configuration happen more often than expeted... When I lifted the lid > > for the first time I saw a really nasty boiler appearance with a > > melted insulation as well... Do your boilers look like rusty and > > dirty, too? I have complained to the seller but he states this is > > always the case with the boilers and referred to the somewhat cheaper > > price compared to other Dualboilers. He has a good reputation among > > the German coffee forums and I will now have them polished, insulated > > with better material and also the steam boiler will get a separate > > switch. Here is a link to the guys webpage gallery where you can see > > his "pimp my Brewtus" work. > > How do you upload pics and where do you store them in this group? I > > haven't been able to find the ones you mentioned in your posting... > > > Cheers > > > Sven > > > On 3 Jun., 03:57, misterpoutine <[email protected]> wrote: > > > > Hi everyone... > > > > I purchased a Brewtus III-V a month 1/2 ago.... The new model with > > > the blue PID and new insulation.... > > > > I opened the Brewtus 2 days ago as a check-up, and found that the > > > steam boiler insultation had "melted", > > > It's not even 1/10 of the insulation thickness on the brewing > > > boiler.... > > > > I've sent some pictures on this forum, it's in the FILE forum and are > > > numbered: 6084-6085-6087 > > > > I know it's the latest model and almost brand new, but has anyone seen > > > this on the new Brewtus ? > > > > I've contacted Zcafe(Canada) and I'm waiting for an response from > > > them.... > > > > Any help would be greatly appreciated.... > > > > Thanks...... Jan- Hide quoted text - > > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
