Todd, not sure if you recall that I had similar problems (not exactly but close) and we changed pumps three times before settling on the OPV. The puck-flip thing solved it immediately, but my symptoms were having pressure drop, not build. I bet he finds scale in the OPV and can cure it with a quick clean with a brass brush, combined with flipping the puck to create a good seal again in the OPV. By the way, what is the "air remover"?
b On Mar 11, 2011, at 3:59 PM, Todd Salzman wrote: > > That problem can be caused by a few things. > > I would recommend changing the pump, air remover and the OPV valve. It is not > very expensive it will cover just about all problems associated with the > change in pump pressure. You may also want to replace the upper actuator in > the brew group. > > Contact the folks at: [email protected] > > They can hook you up with the parts. > > Todd Salzman > Whole Latte Love > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
