Todd, I am facing the same issue as the original author. I replaced all three parts (pump, deaerator, and OPV). and still have the problem. You suggested replacing the upper actuator in the brew group. I have brew group schematics, but am not sure exactly what part this is. Do you have the part number? WLL told me to ship the machine, but I can't bear the cost or time. Besides, I got the BII to be able to repair it on my own. I am going to disassemble the OPV today just to see if that helps. Could it be build-up in the machine? If so, where? I have been using Crystal Geyser for the last two years. I had the same problem 2 years ago, replace the three parts, and all was well with the world. I expected the same thing this time around to no avail. Other thoughts are welcome.
Kind Regards, Dustin Lipson On Mar 11, 7:59 pm, "Todd Salzman" <[email protected]> wrote: > > That problem can be caused by a few things. > > I would recommend changing the pump, air remover and the OPV valve. It is not > very expensive it will cover just about all problems associated with the > change in pump pressure. You may also want to replace the upper actuator in > the brew group. > > Contact the folks at: [email protected] > > They can hook you up with the parts. > > Todd Salzman > Whole Latte Love -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
