there is sort of a reset option without opening the cover but given your description, it is almost certain not to do what you want. But, at least its easy. Turn off your Brewtus and hold the right hand button on the PID and turn it on while you are holding the button. That resets the PID to the factory settings. As I said, that probably won't do anything but given how easy it is, its worth a shot.
You'll have much better success taking the cover off your Brewtus. On both the brew boiler and the steam boiler, there is a small 'peg' which is the reset button. I've heard on some models this is red in colour. On my Brewtus IV, it is not red but just a brass button. Give that a push and see what happens. On Tuesday, May 28, 2013 8:16:33 AM UTC-5, Ken wrote: > > Hi, > > I have had my Brutus IV-R for 2 years. All has been perfect until this > morning. Both steam and brew switches are on. The brew temp was normal, and > I could pull a shot, but there is no steam pressure. So no hot water or > steam. But the steam light was on. Before I open it up is there a reset > button on the steam boiler that might have popped? I have a good Fluke DVM > and know how to use it. I repair electronics as a hobby. But I have never > troubleshooted a duel boiler espresso machine. Where do I look first? > > Thanks! > > Ken > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
