Hi Everyone, There has been some great info on this topic. I have a (1) year old B IV-R and mine is plumbed directly in from my filtered water supply in the basement.
To that end, I have an in-line pressure gauge installed to monitor the pressure and it consistently reads 40-45psi. I have been nervous about this high reading since installation, but have been assured by both Chris's Coffee House and WLL that that pressure is fine for the B IV. I am starting to believe differently now. I have searched endlessly for an in-line pressure reducer valve to no avail. Can someone point me in the right direct on where to buy an in-line pressure reducing valve so I can get my pressure down to 20-25psi? Any help would be greatly appreciate before I end up damaging my favorite appliance in my home. Thanks so much.............. On Tuesday, May 28, 2013 9:16:33 AM UTC-4, Ken wrote: > > Hi, > > I have had my Brutus IV-R for 2 years. All has been perfect until this > morning. Both steam and brew switches are on. The brew temp was normal, and > I could pull a shot, but there is no steam pressure. So no hot water or > steam. But the steam light was on. Before I open it up is there a reset > button on the steam boiler that might have popped? I have a good Fluke DVM > and know how to use it. I repair electronics as a hobby. But I have never > troubleshooted a duel boiler espresso machine. Where do I look first? > > Thanks! > > Ken > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
