I have a Brutus 4 and I turned it on left it to heat up and came back and it showed A2 and lots of water around the machine really hot gauge said 220. So turned it on again next day zoomed right up to 240 or more shut it off. Checked inside no loose wires looked good but the high temp thing had tripped so i reset it. Start again same problem zoomed right up to 250 or so. Checked setting in PID all good and set for 200 f. Also when heating up the led light came on solid until around 180 or so started blinking and then at 200 it stopped blinking and the degree reading kept going stopped it at 220 or so. I have taken out the probe on the brew boiler clean as a whistle. Any ideas. David
-- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
