At 09:09 6-3-02 -0800, Nick Arnett wrote:

> > My home network is behind a cable modem router(*) so I can access the
> > Internet from various computers in the house. Is it possible to limit
> > access from outside to just the webserver? I would not want outsiders
> > to nose around on the other computers in the network.
> >
> > (*) Or at least, that will be the situation by the time I actually start
> > setting up a webserver.
>
>Assuming that your home network uses DHCP or NAT, you'll have to use a
>service such as EasyDNS to propagate your IP address.  As long as you only
>"publish" that machine's address, no other machine would be reachable from
>outside.  On the other hand, if you have static, routable IP addresses (very
>unlikely if they do cable modem service the way it is here), they'll all be
>accessible unless you block them with a firewall.

The home network, once it is in place, will use DHCP (the cable modem 
router comes with a built-in DHCP server and firewall). The modem itself 
will only see the router and will not be aware that there are multiple 
computers on the other side of the router. I have only one IP address; 
technically it is dynamic, but since the connection will be open 24/7 it 
effectively becomes a static IP address.


>Are you looking for server space for Brin-L stuff?

In a while, yes. My website is currently approx. 10 MB in size, and with 
the various planned additions I will eventually need more than the 15 MB 
disk space I get from GeoCities. It will be quite a while before the Great 
Brin-L Archive goes on-line, but once *that* happens I will need a few 
hundred MB of disk space.

The main reason for setting up my own web server is money: by doing it 
myself I can host Brin-L.com with all the disk space and POP3 e-mail 
accounts I need, without having to worry about how much it is going to cost me.


>A couple of months ago, I didn't tell you, but I once again tried to set up
>a secure way for you to use space on my server.  But I couldn't figure out
>how to keep your sandbox secure while also giving the web server access to
>it.  I'm certain it's possible and if this is for Brin-related stuff, I'll
>give it another shot if you like.

If you can find the time, please do.


>Come to think of it, I have yet another solution.  I have a Mac doing
>nothing, which runs Yellow Dog Linux.  I could make that machine completely
>available to you.  Anyone know if Apache performance is reasonable on a
>7500/100 Power Mac?

My website, hosted on a Mac? I can already see William Goodall 
ROTFLHAO...   :-)

(For the non-chatters: William and I keep going on against each other about 
the inferiority of Windows or Mac OS; poor misguided William still believes 
that the Mac OS is the superior OS...)


Jeroen

_________________________________________________________________________
Wonderful World of Brin-L Website:                  http://www.Brin-L.com
Tom's Photo Gallery:                          http://tom.vanbaardwijk.com

Reply via email to