Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
Enlarging the holes on the brackets would be a better idea because once you break through the chrome plating on a bumper the rust demons get a toehold on the bare metal you exposed. Bill Vander Werf Herbert Lumpp wrote: > ------------------------------------------------------------ > > Tom, > > Instead of trying to modify the holes on the bumper, what about enlarging or > slotting the holes on the mounting brackets? Once the bumper is mounted the > larger holes will be covered up... > > cYa- > > Herb Lumpp > 1966 El Camino > ACES #3509 > http://web.tampabay.rr.com/herbsworld/index.htm > > ----- Original Message ----- > From: "Tom Tomlinson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, February 22, 2002 8:55 PM > Subject: RE: [Chevelle-List] Bad fitting repros > > > > > Replies to this message are sent to The Chevelle Mailing List > > ------------------------------------------------------------ > > > > There is just enough room behind the bumper bolts to cut the holes larger > > and move the bumper 3/16" to the right without seeing the larger hole. > > Anyone have a suggestion on the best way to cut the square hole larger? > > > > Tom Tomlinson ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
