You can copy part of config from tftp directly to running-config snmpset -v 2c -c RW-SNMP-COMMUNITY X.X.X.X .1.3.6.1.4.1.9.9.96.1.1.1.1.2.111 integer 1 .1.3.6.1.4.1.9.9.96.1.1.1.1.3.111 integer 1 .1.3.6.1.4.1.9.9.96.1.1.1.1.4.111 integer 4 .1.3.6.1.4.1.9.9.96.1.1.1.1.5.111 a "1.1.1.1" .1.3.6.1.4.1.9.9.96.1.1.1.1.6.111 s "config" .1.3.6.1.4.1.9.9.96.1.1.1.1.14.111 integer 4
RW-SNMP-COMMUNITY - your RW community X.X.X.X - your switch 1.1.1.1 - IP of tftp server config - name of config file Usually, you can copy from tftp to run-conf only comands you need, for example cat config.cfg line vty 0 4 password cisco login And this three command merge with existing running-config, not overwriting them But sometimes cisco refuses to do it, and you have to copy run to tftp first, change it, and then copy back to run To copy run to tftp: snmpset -v 2c -c RW-SNMP-COMMUNITY X.X.X.X .1.3.6.1.4.1.9.9.96.1.1.1.1.2.111 integer 1 .1.3.6.1.4.1.9.9.96.1.1.1.1.3.111 integer 4 .1.3.6.1.4.1.9.9.96.1.1.1.1.4.111 integer 1 .1.3.6.1.4.1.9.9.96.1.1.1.1.5.111 a "1.1.1.1" .1.3.6.1.4.1.9.9.96.1.1.1.1.6.111 s "config" .1.3.6.1.4.1.9.9.96.1.1.1.1.14.111 integer 4 HTH Olga _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
