Thank you Dennis, I understand your instructions. I’m getting that feeling I’m about to learn and do something new :)
Cheers, Randy > On Jun 4, 2026, at 1:56 PM, Dennis C. via CnC-List <[email protected]> > wrote: > > First, I think the deck is cored but it does not extend completely to the toe > rail stopping a few inches short. > > Second, what Dave said. First, clean up the two holes a bit. Bevel the > edges to at least 5:1. > > Then lay up some glass on waxed paper with epoxy or vinylester resin about > 3/16-1/4 inch thick, cut it to fit from underneath with at least an inch or > so outside the hole where you can. Epoxy them in place using thickened > epoxy. Maybe apply with a notched trowel to get ridges. > > Then fill and smooth the deck from above. Cut pieces of glass, lay them in > the hole dry, then apply epoxy or resin to the edges of the bevel but not > beyond. Let cure then trim any glass threads around the edges by carefully > sanding. > > Smooth with putty and two part glazing putty. > > -- > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > Please help cover the costs of maintaining this list by making a small > contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All > contributions are greatly appreciated. Please help cover the costs of maintaining this list by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All contributions are greatly appreciated.
