>Mine works fine.  I notice that the Appletalk control panel seems to revert
>to Modem/Printer occasionally, perhaps a symptom of a PRAM battery going
>low?
>
>Are you missing software?
>
>Ed

Dear Ed:  

It is helpful to know that your GV Modem/Ethernet PC Card works with 
ethernet.  When I attempt to use ethernet I always receive the same error 
message after attempting to select alternate ethernet.  "An error 
occurred attempting to use Alternate Ethernet"

This did not occur before the G3320MHz upgrade and upgrading the GV 
software.

It could be a softward problem.  I have played a lot with my GV software 
and am still not clear which extensions should be active to use ethernet 
with the GV Card.  Currently I have installed and active the following:  
GV Platimum Pro Enabler 1.0.7
PC Macr Multifunction Update 1.0
Global Village PC Card 2.5.9c
GV Platimum Enabler 1.0.7
GV PC Card Ethernet 3.0.2
I also have toolbox and faxing extensions and other software.

I have difficulty figuring out from the Boca GV site what software should 
be installed to use etnernet.

Would you mind sharing what GV software you have active when you use 
ethernet?  Also do you know is there are any issues with Open tp 
extensions?  

Currently the GV Modem/Ethernet PC Card is running on the 8.6 system.

Thanks for your reply
Stan Bratton


Stan Bratton



----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>

To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try.  <[EMAIL PROTECTED]>

----------
Dr. Bott | Great Duo & 2400 stuff including 10/100 Ethernet for 2400s! 
Dr. Bott | Duo Batts too  <http://www.drbott.com/prod/alist/duo.html>

NineWire          | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/

PowerBook Guy is          |      Click here!
Everything PowerBook!     |      http://www.powerbookguy.com

Midwest Mac Parts  ][  <http://www.midwestmac.com>  
After-market parts  for Macs.   ][  888-356-1104 ][

MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! 
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>

Reply via email to