Hi Mike, That is not correct. Please reread my response. Keep in mind that the P3 has two RS232 ports on it. One port from the computer and one port to the K3.
If you wait until you get the P3 and its manual in your hands you'll see that it is really quite simple. Everything you need is contained in the box. 73, Mike K2MK Mike-14-3 wrote > > Thanks, Mike. > > Just to make sure my age fuzzed brain got it: > > The "Y" stays where it is, plugged into the K3. The cable from the > computer moves from that to the P3, then the shorty goes from the P3 to > the "Y". > > 73, Mike NF4L > > On 8/1/12 2:00 PM, Mike K2MK wrote: >> Hi Mike, >> >> Think of the leg of the Y cable that goes to the K3 as the Elecraft leg. >> Take the cable that now goes to the K3 and move it to the P3. Then take >> the >> short serial cable supplied with the P3 and connect it between the P3 and >> the K3. >> >> 73, >> Mike K2MK >> >> >> >> Mike-14-3 wrote >>> I've got a P3 coming, and just downloaded the manual. If I understand >>> correctly from the diagram on p 13, the RS232 path is >>> Computer--->P3--->K3. >>> >>> Currently I have a "y" cable plugged into the K3. The cable from the >>> 'puter plugs into one leg of that, and the other leg goes to the SteppIR >>> control box. >>> >>> Do I leave that where it is? >>> >>> 73, Mike NF4L > -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-hookup-tp7560124p7560141.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
