Hi Ian, My 5 year old SteppIR controller works fine at 38400 bps.
73, Mike K2MK Ian White GM3SEK wrote > > The older SteppIR controller can only handle up to 19200 bps. That speed > must be manually configured in all three devices - the SteppIR > controller, the computer and the P3 - and the SteppIR controller MUST be > connected at the INput of the P3 (NOT to the K3) > > The connection between the P3 and the K3 will always be automatically > reconfigured to 38400 bps (regardless of the manual configuration > setting in the K3) so an older SteppIR controller cannot read the > traffic at this speed. > > The newer SteppIR SDA-100 controller can handle 38400 bps so it could be > connected to either the K3 or the P3, but again this speed must be > manually configured in all three device > > 73 from Ian GM3SEK > http://www.ifwtech.co.uk/g3sek > -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-hookup-tp7560124p7560168.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
