Jorge,
Basically, you cannot share an serial RS-232 connection between devices,
with one exception: It is possible to have a receive-only device monitor
[eavesdrop or "listen in" on] the TXD or RXD signals. It can't transmit
though.
"So now I lost the feature to change antennas automatically when I
change bands on the K3"
Do you mean that you changed your connection back from the remoterig to
your local equipment and that no longer works?
I use an A/B data switch to switch my K3 CAT port between the local
computer when I'm operating with my home antenna, and the remoterig for
when I'm operating W7RN remotely.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 11/14/2017 12:23 PM, Jorge Diez - CX6VM wrote:
Hello
At my station, I have Elecraft K3, Bandmaster III, SixPack, CAT cable
connected to K3´s RS232
So when I change bands in the radio, antenna is selected automatically
through CAT cable and band decoder (Bandmaster III)
Today I connected remoterig box, so needed to remove CAT cable to connect
remoterig.
So now I lost the feature to change antennas automatically when I change
bands on the K3
How can I do to share RS232 to have CAT and remoterig at the same time?
thanks,
Jorge
CX6VM/CW5W
______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
