Hi John thanks for the information
N6TV Y box will work for ACC port, but I need something equal for RS232 port I use a Y cable to ACC to drive bandecoder and amplifier and works fine thanks, Jorge 2017-11-14 20:34 GMT-03:00 <[email protected]>: > I use a Top Ten Band decoder to control a SixPak. This is connected to the > RS-232 jack. I often have other devices(such as a MicroHAM DigiKeyer2) also > connected to this jack using a N6TV Y-box. For two devices you can use an > inexpensive Y adaptor instead. I have no experience with a remoterig box. > > John KK9A > > > Jorge Diez - CX6VM cx6vm.jorge at gmail.com > Hello > > At my station, I have Elecraft K3, Bandmaster III, SixPack, CAT cable > connected to K3´s RS232 > > So when I change bands in the radio, antenna is selected automatically > through CAT cable and band decoder (Bandmaster III) > > Today I connected remoterig box, so needed to remove CAT cable to connect > remoterig. > > So now I lost the feature to change antennas automatically when I change > bands on the K3 > > How can I do to share RS232 to have CAT and remoterig at the same time? > > thanks, > Jorge > CX6VM/CW5W > > -- 73, Jorge CX6VM/CW5W ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
