If you want to share the K3 CAT RS232 port and feed with other hardware, the best way I have found is using Win4K3Suite. Not only will Win4K3Suite let you share the CAT feed of your K3 with multiple software applications at the same time, but you can do it with physical serial connections too. Win4K3Suite connects to your K3's direct CAT/RS232 port and then manages the feed to other physical ports and or virtual RS232 port pairs for software connections.
For example, I can have N1MM+, DXLab Commander and WSJT-X all sharing the CAT feed, each program follows the other if you want them all running at the same time... and beyond that I can setup another connection to my 2K-FA amp. In this example, all three software applications think they are directly connected to the K3. They all can poll the K3 data and they all receive the output data. The latest version of Win4K3Suite lets you setup up to 6 Aux/CAT ports for this purpose. They can be virtual com port pairs for software or direct connections to physical serial ports for an amplifier, SDA100, auto antenna tuner etc... It works very well and is rock solid reliable in my experience. I have a YouTube video that shows this... around minute 18 of the top of my head. In the quick demo in that part of the video I should the 2K-FA following the K3 along with a couple software apps, N1MM+ and DXLab Commander, if memory serves me correct. Jump to minute 18 a watch for a few minutes: https://www.youtube.com/watch?v=Ku8Gyl0amRY I'm assuming this is what you are looking for with your remote rig connection to your K3. You want the remote rig box to think it's directly connected to the K3 at the same time other software and hardware think they are directly connected. Win4K3Suite provides the best way to handle this IMHO and I have tried a number of solutions that will work too... LP-BRIDGE, Omni-Rig etc... but the other fall short when it comes to a transparent share across software and hardware. Max NG7M On Tue, Nov 14, 2017 at 1:23 PM, Jorge Diez - CX6VM <[email protected]> wrote: > Hello > > At my station, I have Elecraft K3, Bandmaster III, SixPack, CAT cable > connected to K3´s RS232 > > So when I change bands in the radio, antenna is selected automatically > through CAT cable and band decoder (Bandmaster III) > > Today I connected remoterig box, so needed to remove CAT cable to connect > remoterig. > > So now I lost the feature to change antennas automatically when I change > bands on the K3 > > How can I do to share RS232 to have CAT and remoterig at the same time? > > thanks, > Jorge > CX6VM/CW5W > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] -- M. George ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
