Hello Fred I lost automatically antenna change because I needed to remove my CAT cable from K3 to connect remoterig. Of course if I removed remoterig RS232 cable and connect CAT cable all is OK as I had it before connecting remoterig
That switch A/B is not an option for what I am looking for, I need both at the same time thanks! Jorge 2017-11-14 18:12 GMT-03:00 Fred Jensen <[email protected]>: > Jorge, > > Basically, you cannot share an serial RS-232 connection between devices, > with one exception: It is possible to have a receive-only device monitor > [eavesdrop or "listen in" on] the TXD or RXD signals. It can't transmit > though. > > "So now I lost the feature to change antennas automatically when I change > bands on the K3" > > Do you mean that you changed your connection back from the remoterig to > your local equipment and that no longer works? > > I use an A/B data switch to switch my K3 CAT port between the local > computer when I'm operating with my home antenna, and the remoterig for > when I'm operating W7RN remotely. > > 73, > > Fred ["Skip"] K6DGW > Sparks NV DM09dn > Washoe County > > > On 11/14/2017 12:23 PM, Jorge Diez - CX6VM wrote: > >> Hello >> >> At my station, I have Elecraft K3, Bandmaster III, SixPack, CAT cable >> connected to K3´s RS232 >> >> So when I change bands in the radio, antenna is selected automatically >> through CAT cable and band decoder (Bandmaster III) >> >> Today I connected remoterig box, so needed to remove CAT cable to connect >> remoterig. >> >> So now I lost the feature to change antennas automatically when I change >> bands on the K3 >> >> How can I do to share RS232 to have CAT and remoterig at the same time? >> >> thanks, >> Jorge >> CX6VM/CW5W >> ______________________________________________________________ >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] -- 73, Jorge CX6VM/CW5W ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
