How can I do to share RS232 to have CAT and remoterig at the same time?
You don't since you pass the computer connection through Bandmaster III using the USB input when the output is connected to the K3 RS-232 jack. You can not connect both the Bandmaster RS-232 connection *and* Remote rig to the K3 RS-232 jack at the same time.
However, you can connect Bandmaster III to the K3 ACC jack and use the BCD data (Yaesu) to indicate the selected band. That will allow you to connect *either* Remote Rig *or* the local computer to the K3 CAT jack. Bandmaster will follow band selection from the rig whether you are using Remote Rig or the local computer. See the Bandmaster III manual and/or contact the manufacturer for support. 73, ... Joe, W4TV On 11/14/2017 3:23 PM, Jorge Diez - CX6VM wrote:
Hello At my station, I have Elecraft K3, Bandmaster III, SixPack, CAT cable connected to K3´s RS232 So when I change bands in the radio, antenna is selected automatically through CAT cable and band decoder (Bandmaster III) Today I connected remoterig box, so needed to remove CAT cable to connect remoterig. So now I lost the feature to change antennas automatically when I change bands on the K3 How can I do to share RS232 to have CAT and remoterig at the same time? thanks, Jorge CX6VM/CW5W ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
