Try this. > On Feb 23, 2018, at 9:16 AM, Bob McGraw K4TAX <rmcg...@blomand.net> wrote: > > No issues of that type here. These are my setup numbers: > > Baud Rate = Eight > 38400 > Stop Bits = one two > > Handshake = None > > PTT method = CAT RTS > > Mode = Data/Pkt > > Split = Rig Fake It > > Also under the Advanced tab: Miscellaneous > > TX Delay = 0.1 sec. > > I'm not running any other applications such as JT Alert, N1NM, etc. The > computer is connected direct to the K3S with no router, or splitter, or hub > and such in the path. > > *** Be sure the VOX mode on the radio is OFF. {Very important} > > > 73 > > Bob, K4TAX > > > > > On 2/22/2018 10:08 PM, Richard wrote: >> >>> Begin forwarded message: >>> >>> From: Richard <flat...@comcast.net> >>> Subject: Re: [Elecraft] K3 And WSJT-X FT8 Timing >>> Date: February 22, 2018 at 11:06:58 PM EST >>> To: James Bennett <w6...@me.com> >>> >>> I’m fighting the same problem and MORE. It usually goes like this: >>> >>> First FT8 (or JT65) activity of the day, the K3S seems to start on time but >>> sometimes shut off quite late. Any band, any power; I don’t use the >>> amplifier, so 100 watts is the limit. >>> >>> As time goes along, the transmission initiation BY THE K3S gets later and >>> later, and the shut off time does, too. By late I mean 2 to sometimes 5 >>> seconds! >>> >>> Eventually, it starts late, then DOESN’T shut off at all. >>> >>> Finally, it doesn’t start at all. >>> >>> I’ve tried just about every imaginable combination of setting on the Radio >>> panel and in the Config menu, all with no improvement. >>> >>> In the year or more of enjoying JT65 and then FT8 with my Icom IC-7410, I >>> had NONE of these problems, using the same computer and same software. It >>> was bang on and trouble free from Day One. >>> >>> You kinda hafta suspect the K3S is the culprit in this, but I’m open to >>> anything. If I can’t solve this soon, there will be a virtually brand new >>> K3S for sale. >>> >>> Richard - W4KBX >>> >>>> Guys - sorry for the delay in responding to your posts - places to go, >>>> things to do, all overriding ham radio for a couple hours. >>>> >>>> It was suggested that I see if I’m out of sync on my computer clock(s). >>>> Well, here is the strange thing: the iMac that the K3 is connected to >>>> consistently is giving me a DT response of 0.1 to 0.2 on 90% of the >>>> decoded stations, so I’m thinking that the default time server the iMac / >>>> OSX is connected to is pretty accurate. But it is this rig that starts >>>> it’s transmission a bit late. >>>> >>>> The RPi 3 that the KX3 is connected to consistently is giving me DT >>>> figures around -0.8 to -0.9. which makes me think my time sync is a little >>>> off. But the KX3 connected to this RPi starts right up when it is supposed >>>> to. Interestingly, that RPi 3 is connected via short Ethernet to another >>>> RPi 3 that runs it’s own GPS-sync’d NTP server. Go figure. >>>> >>>> I’m stumped. >>>> >>>> >>>> >>>>> On Feb 22, 2018, at 5:28 PM, Nr4c <n...@widomaker.com> wrote: >>>>> >>>>> Check the clocks on the computers. Sync them to a time server. >>>>> >>>>> Sent from my iPhone >>>>> ...nr4c. bill >>>>> >>>>> >>>>>> On Feb 22, 2018, at 6:30 PM, James Bennett <w6...@me.com> wrote: >>>>>> >>>>>> Hi Dennis - how you doing? >>>>>> >>>>>> Sorry I neglected to provide enough info - was in a hurry to post that >>>>>> before I had to run out to pickup kids at school (close to your dads >>>>>> QTH!) >>>>>> >>>>>> I am using VOX on both rigs. Each rig has it’s own computer and >>>>>> separate, but identical external USB sound cards. The K3 is connected to >>>>>> an iMac and the KX3 is connected to a Raspberry Pi 3. >>>>>> >>>>>> Jim / W6JHB >>>>>> >>>>>> >>>>>> >>>>>>> On Feb 22, 2018, at 2:31 PM, Dennis Moore <den...@mail4life.net> wrote: >>>>>>> >>>>>>> How are you keying the K3, VOX or PTT? >>>>>>> >>>>>>> It's not clear from the email, are the K3 and KX3 on separate >>>>>>> computers on just different sound cards in the same computer? >>>>>>> >>>>>>> 73, Dennis NJ6G >>>>>>> >>>>>>> >>>>>>>> On 2/22/2018 14:22, James Bennett wrote: >>>>>>>> Got a question about using my K3 with WSJT-X 1.8.0 with FT8 >>>>>>>> >>>>>>>> I started looking at the “time bar” in WSJT-X and when the K3’s red TX >>>>>>>> light comes on with the meter showing RF going out. It is between 1.5 >>>>>>>> and 2 seconds after the beginning of the new 15 second sequence! In >>>>>>>> that short duration, I am hearing other stations’ signals coming >>>>>>>> through on my headphones, so I know that other folks are getting their >>>>>>>> rig to transmit right at the start of the 15 second sequence. If mine >>>>>>>> is coming on 1.5 - 2 seconds late, I’m thinking I may not always get >>>>>>>> decoded on the other end. >>>>>>>> >>>>>>>> So, I switched over to my KX3 running the same version of WSJT-X and >>>>>>>> observed what happened there. No delay - when the new 15 second >>>>>>>> sequence starts, the KX3 goes into transmit almost immediately. >>>>>>>> >>>>>>>> Both the KX3 and the K3 are connected to two identical Tascam USB125M >>>>>>>> external sound cards. >>>>>>>> >>>>>>>> Is there some setting on the K3 that is causing my transmissions to >>>>>>>> fire off a tad late? >>>>>>>> >>>>>>>> Jim / W6JHB >>>>>>> ______________________________________________________________ >>>>>>> Elecraft mailing list >>>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>>>> Post: mailto:Elecraft@mailman.qth.net >>>>>>> >>>>>>> This list hosted by: http://www.qsl.net >>>>>>> Please help support this email list: http://www.qsl.net/donate.html >>>>>>> Message delivered to w6...@me.com >>>>>> ______________________________________________________________ >>>>>> Elecraft mailing list >>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>>> Post: mai >>>> ______________________________________________________________ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:Elecraft@mailman.qth.net >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> Message delivered to flat...@comcast.net >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to rmcg...@blomand.net > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jstengrev...@comcast.net
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com