Some RTTY software supports the subreceiver with dual decode,
using both left and right channels on the K3/K3S. I haven't
experimented with dual watch on the KX3, but it is probably
useful to get both channels into the PC for digimodes.
73 Bill AE6JV
On 4/16/18 at 4:50 AM, [email protected] (Don Wilhelm) wrote:
It is not the KX2/KX3 that decides which channel from the
soundcard is used, but the PC application software. In
general the left channel is used for digital work, but some can
reverse it.
So it is best to buffer the PHONES output and send it off to a separate jack.
-----------------------------------------------------------------------
Bill Frantz | I don't have high-speed | Periwinkle
(408)356-8506 | internet. I have DSL. | 16345
Englewood Ave
www.pwpconsult.com | | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
